- Removed temporary cropped PDFs from TIDY_FILES, as they are no longer generated.

nigel.stanger / Handbook

Browse code - Removed temporary cropped PDFs from TIDY_FILES, as they are no longer generated. master
1 parent 033351a commit 7d6c2a34efb3510f636a99348b655094da2c592d nstanger authored on 26 Feb 2010

Patch

Showing 2 changed files

Ignore Space Show notes View make-includes/build_lecture_rules.make
################################################################################ # # File: $Id$ # # Standard variables and rules for building a set of lecture files. # Altering these definitions will affect ALL LECTURE MAKEFILES FOR ALL # PAPERS!! If you need to do something specific for a particular paper, # include a custom rule in its makefile. DON'T add it here! # ################################################################################ ################################################################################ # # Add standard file suffixes. # include $(GLOBAL_HANDBOOK_INCLUDE)/standard_suffixes.make ################################################################################ # # Standard directories. # IMGDIR=images ################################################################################ # # Standard paths. # include $(GLOBAL_HANDBOOK_INCLUDE)/standard_paths.make ################################################################################ # # Files to be cleaned by the various "clean" targets. Note that we don't # "tidy" .aux files because they may be needed by the xr package for inter- # document cross references, but won't get regenerated if the final target # PDF files exist. They will be caught by by the "clean" target though. # TIDY_FILES+=.tmp .out .log .nav .toc .snm .head .dvi \ slides-combined.pdf slides-notes.pdf CLEAN_FILES+=.aux .pdf ################################################################################ # # Various environment variables. # include $(GLOBAL_HANDBOOK_INCLUDE)/standard_environment.make # # Base file names for the various documents. # SLIDES?=Chapter$(CHAPTER)slides FIGURES?=Chapter$(CHAPTER)figures COMBINED?=Chapter$(CHAPTER)combined NOTES?=Chapter$(CHAPTER)notes # # Standard files to be installed on the web server. # ifneq ($(strip $(SLIDES)),) INSTALL_FILES+=$(SLIDES).pdf endif ifneq ($(strip $(FIGURES)),) INSTALL_FILES+=$(FIGURES).pdf $(FIGURES)-reduced.pdf endif ifneq ($(strip $(COMBINED)),) INSTALL_FILES+=$(COMBINED).pdf endif # # List of standard "phony" build targets. # TARGETS+=slides notes slides-combined slides-notes figures figures2up combined # .PHONY: $(TARGETS) ################################################################################ # # Display a message if someone tries to build a target that has been # disabled (by setting the appropriate variable to empty in the makefile). # disabled_message=@echo The \"$(1)\" target has been disabled for this chapter. ################################################################################ # # Build everything. # all: slides notes figures figures2up combined ################################################################################ # # Build presentation slides. If $(SLIDES) is empty, these rules are ignored. # ifneq ($(strip $(SLIDES)),) # # Set the prerequisites for the "slides" build target, depending on # whether the figures document exists. If $(FIGURES) is non-empty, we need # to include the figures .aux file for inter-document cross-references. # ifeq ($(strip $(FIGURES)),) SLIDES_PREREQS:=$(SLIDES).pdf else SLIDES_PREREQS:=figures $(SLIDES).pdf endif # # Build the slides for the presentation. # slides: $(SLIDES_PREREQS) $(SLIDES).pdf: $(SLIDES).tex $(SLIDE_IMAGES) $(SLIDE_BACKGROUNDS) $(SLIDE_FILES) pdflatex --jobname=$(SLIDES) '\documentclass[$(LATEX_OPTS)]{lectureslides}\input{$(SLIDES)}' pdflatex --jobname=$(SLIDES) '\documentclass[$(LATEX_OPTS)]{lectureslides}\input{$(SLIDES)}' else slides: $(call disabled_message,$@) endif ################################################################################ # # Build the presentation notes. If $(NOTES) is empty, these rules are # ignored. # ifneq ($(strip $(NOTES)),) # # Build the slides with notes. # slides-notes: slides-notes.pdf slides-notes.pdf: $(SLIDES).tex $(SLIDE_IMAGES) $(SLIDE_BACKGROUNDS) $(SLIDE_FILES) pdflatex --jobname=slides-notes '\documentclass[$(LATEX_OPTS),notes=onlyslideswithnotes]{lectureslides}\input{$(SLIDES)}' pdflatex --jobname=slides-notes '\documentclass[$(LATEX_OPTS),notes=onlyslideswithnotes]{lectureslides}\input{$(SLIDES)}' # # Build the slides with notes, 6-up. # notes: $(NOTES).pdf $(NOTES).pdf: $(NOTES).tex slides-notes.pdf pdflatex $< pdflatex $< else notes slides-notes: $(call disabled_message,$@) endif ################################################################################ # # Build the complete combined lecture document. If $(COMBINED) is empty, # these rules are ignored. # ifneq ($(strip $(COMBINED)),) # # Set the prerequisites for the "combined" build target, depending on # whether the figures document exists. If $(FIGURES) is empty, they are # omitted from the combined document. # ifeq ($(strip $(FIGURES)),) COMBINED_PREREQS:=$(COMBINED).tex slides-combined.pdf else COMBINED_PREREQS:=$(COMBINED).tex slides-combined.pdf $(FIGURES).pdf endif # # Build the slides for the combined document. # slides-combined: slides-combined.pdf slides-combined.pdf: $(SLIDES).tex $(SLIDE_IMAGES) $(SLIDE_BACKGROUNDS) pdflatex --jobname=slides-combined '\documentclass[$(LATEX_OPTS),handout]{lectureslides}\input{$(SLIDES)}' pdflatex --jobname=slides-combined '\documentclass[$(LATEX_OPTS),handout]{lectureslides}\input{$(SLIDES)}' # # Build the complete combined document. # combined: $(COMBINED).pdf $(COMBINED).pdf: $(COMBINED_PREREQS) $(COMBI_IMAGES) $(COMBI_FILES) pdflatex $< pdflatex $< else combined slides-combined: $(call disabled_message,$@) endif ################################################################################ # # Build the figures and examples document. If $(FIGURES) is empty, these # rules are ignored. # ifneq ($(strip $(FIGURES)),) figures: $(FIGURES).pdf $(FIGURES).pdf: $(FIGURES).tex $(FIG_IMAGES) $(FIG_FILES) pdflatex $< pdflatex $< figures2up: $(FIGURES)-reduced.pdf $(FIGURES)-reduced.pdf: $(FIGURES).pdf pdfnup $< --nup 2x1 --outfile $@ else figures figures2up: $(call disabled_message,$@) endif ################################################################################ # # Build the test document. # test: test.pdf test.pdf: test.tex ################################################################################ # # Install the appropriate files on the web server. This relies on the # environment variable HANDBOOK_INSTALL_DIRECTORY being defined, and # (assuming that this variable points to a directory on the network) the # appropriate share has been mounted. # # See build_document_rules.make for an explanation of why the install # uses a foreach. # # Note that this won't do anything clever if you give it files that are # in subdirectories of the current directory. Everything will be flattened # at the other end. That is, something like "images/foo.pdf" will go into # the installation directory as "foo.pdf", not "images/foo.pdf". # install: @announce "Copying files to web server --- make sure that you have the share mounted!" @test -d $(HANDBOOK_INSTALL_ROOT) @mkdir -p $(INSTALL_DIRECTORY) @$(foreach f,$(INSTALL_FILES),if test ! -f $(INSTALL_DIRECTORY)/$(f) -o $(f) -nt $(INSTALL_DIRECTORY)/$(f); then echo "Installing $(f)"; cp $(f) $(INSTALL_DIRECTORY); fi;) ################################################################################ # # Debugging: print the values of the standard variables. # debug: @announce Externally defined variables @echo "TEACHING_SHARED = [$(TEACHING_SHARED)]" @echo "HANDBOOK_INSTALL_ROOT = [$(HANDBOOK_INSTALL_ROOT)]" @echo "CHAPTER = [$(CHAPTER)]" @announce Internally defined variables @echo "SUBJECT_CODE = [$(SUBJECT_CODE)]" @echo "PAPER_NUMBER = [$(PAPER_NUMBER)]" @echo "GLOBAL_HANDBOOK_INCLUDE = [$(GLOBAL_HANDBOOK_INCLUDE)]" @echo "INSTALL_DIRECTORY = [$(INSTALL_DIRECTORY)]" @echo "INSTALL_FILES = [$(INSTALL_FILES)]" @echo "SLIDE_IMAGES = [$(SLIDE_IMAGES)]" @echo "SLIDE_BACKGROUNDS = [$(SLIDE_BACKGROUNDS)]" @echo "SLIDE_FILES = [$(SLIDE_FILES)]" @echo "FIG_IMAGES = [$(FIG_IMAGES)]" @echo "FIG_FILES = [$(FIG_FILES)]" @echo "TIDY_FILES = [$(TIDY_FILES)]" @echo "CLEAN_FILES = [$(CLEAN_FILES)]" @echo "DRAFT = [$(DRAFT)]" @echo "LATEX_OPTS = [$(LATEX_OPTS)]" @echo "SLIDES = [$(SLIDES)]" @echo "FIGURES = [$(FIGURES)]" @echo "COMBINED = [$(COMBINED)]" @echo "NOTES = [$(NOTES)]" @echo "SLIDES_PREREQS = [$(SLIDES_PREREQS)]" @echo "COMBINED_PREREQS = [$(COMBINED_PREREQS)]" @echo "TARGETS = [$(TARGETS)]" ################################################################################ # # Clean up: get rid of all the temporary files. # tidy: rm -f $(TIDY_FILES) # # Clean up: get rid of everything except the original source. # clean: tidy rm -f $(CLEAN_FILES) ################################################################################ # # List all "phony" build targets. # targets: @echo "targets: $(TARGETS)" ################################################################################ # # Standard default rules. # include $(GLOBAL_HANDBOOK_INCLUDE)/standard_rules.make ################################################################################ # # File: $Id$ # # Standard variables and rules for building a set of lecture files. # Altering these definitions will affect ALL LECTURE MAKEFILES FOR ALL # PAPERS!! If you need to do something specific for a particular paper, # include a custom rule in its makefile. DON'T add it here! # ################################################################################ ################################################################################ # # Add standard file suffixes. # include $(GLOBAL_HANDBOOK_INCLUDE)/standard_suffixes.make ################################################################################ # # Standard directories. # IMGDIR=images ################################################################################ # # Standard paths. # include $(GLOBAL_HANDBOOK_INCLUDE)/standard_paths.make ################################################################################ # # Files to be cleaned by the various "clean" targets. Note that we don't # "tidy" .aux files because they may be needed by the xr package for inter- # document cross references, but won't get regenerated if the final target # PDF files exist. They will be caught by by the "clean" target though. # TIDY_FILES+=.tmp .out .log .nav .toc .snm .head .dvi \ slides-combined.pdf slides-notes.pdf $(IMGDIR)/-crop.pdf CLEAN_FILES+=.aux *.pdf ################################################################################ # # Various environment variables. # include $(GLOBAL_HANDBOOK_INCLUDE)/standard_environment.make # # Base file names for the various documents. # SLIDES?=Chapter$(CHAPTER)slides FIGURES?=Chapter$(CHAPTER)figures COMBINED?=Chapter$(CHAPTER)combined NOTES?=Chapter$(CHAPTER)notes # # Standard files to be installed on the web server. # ifneq ($(strip $(SLIDES)),) INSTALL_FILES+=$(SLIDES).pdf endif ifneq ($(strip $(FIGURES)),) INSTALL_FILES+=$(FIGURES).pdf $(FIGURES)-reduced.pdf endif ifneq ($(strip $(COMBINED)),) INSTALL_FILES+=$(COMBINED).pdf endif # # List of standard "phony" build targets. # TARGETS+=slides notes slides-combined slides-notes figures figures2up combined # .PHONY: $(TARGETS) ################################################################################ # # Display a message if someone tries to build a target that has been # disabled (by setting the appropriate variable to empty in the makefile). # disabled_message=@echo The \"$(1)\" target has been disabled for this chapter. ################################################################################ # # Build everything. # all: slides notes figures figures2up combined ################################################################################ # # Build presentation slides. If $(SLIDES) is empty, these rules are ignored. # ifneq ($(strip $(SLIDES)),) # # Set the prerequisites for the "slides" build target, depending on # whether the figures document exists. If $(FIGURES) is non-empty, we need # to include the figures .aux file for inter-document cross-references. # ifeq ($(strip $(FIGURES)),) SLIDES_PREREQS:=$(SLIDES).pdf else SLIDES_PREREQS:=figures $(SLIDES).pdf endif # # Build the slides for the presentation. # slides: $(SLIDES_PREREQS) $(SLIDES).pdf: $(SLIDES).tex $(SLIDE_IMAGES) $(SLIDE_BACKGROUNDS) $(SLIDE_FILES) pdflatex --jobname=$(SLIDES) '\documentclass[$(LATEX_OPTS)]{lectureslides}\input{$(SLIDES)}' pdflatex --jobname=$(SLIDES) '\documentclass[$(LATEX_OPTS)]{lectureslides}\input{$(SLIDES)}' else slides: $(call disabled_message,$@) endif ################################################################################ # # Build the presentation notes. If $(NOTES) is empty, these rules are # ignored. # ifneq ($(strip $(NOTES)),) # # Build the slides with notes. # slides-notes: slides-notes.pdf slides-notes.pdf: $(SLIDES).tex $(SLIDE_IMAGES) $(SLIDE_BACKGROUNDS) $(SLIDE_FILES) pdflatex --jobname=slides-notes '\documentclass[$(LATEX_OPTS),notes=onlyslideswithnotes]{lectureslides}\input{$(SLIDES)}' pdflatex --jobname=slides-notes '\documentclass[$(LATEX_OPTS),notes=onlyslideswithnotes]{lectureslides}\input{$(SLIDES)}' # # Build the slides with notes, 6-up. # notes: $(NOTES).pdf $(NOTES).pdf: $(NOTES).tex slides-notes.pdf pdflatex $< pdflatex $< else notes slides-notes: $(call disabled_message,$@) endif ################################################################################ # # Build the complete combined lecture document. If $(COMBINED) is empty, # these rules are ignored. # ifneq ($(strip $(COMBINED)),) # # Set the prerequisites for the "combined" build target, depending on # whether the figures document exists. If $(FIGURES) is empty, they are # omitted from the combined document. # ifeq ($(strip $(FIGURES)),) COMBINED_PREREQS:=$(COMBINED).tex slides-combined.pdf else COMBINED_PREREQS:=$(COMBINED).tex slides-combined.pdf $(FIGURES).pdf endif # # Build the slides for the combined document. # slides-combined: slides-combined.pdf slides-combined.pdf: $(SLIDES).tex $(SLIDE_IMAGES) $(SLIDE_BACKGROUNDS) pdflatex --jobname=slides-combined '\documentclass[$(LATEX_OPTS),handout]{lectureslides}\input{$(SLIDES)}' pdflatex --jobname=slides-combined '\documentclass[$(LATEX_OPTS),handout]{lectureslides}\input{$(SLIDES)}' # # Build the complete combined document. # combined: $(COMBINED).pdf $(COMBINED).pdf: $(COMBINED_PREREQS) $(COMBI_IMAGES) $(COMBI_FILES) pdflatex $< pdflatex $< else combined slides-combined: $(call disabled_message,$@) endif ################################################################################ # # Build the figures and examples document. If $(FIGURES) is empty, these # rules are ignored. # ifneq ($(strip $(FIGURES)),) figures: $(FIGURES).pdf $(FIGURES).pdf: $(FIGURES).tex $(FIG_IMAGES) $(FIG_FILES) pdflatex $< pdflatex $< figures2up: $(FIGURES)-reduced.pdf $(FIGURES)-reduced.pdf: $(FIGURES).pdf pdfnup $< --nup 2x1 --outfile $@ else figures figures2up: $(call disabled_message,$@) endif ################################################################################ # # Build the test document. # test: test.pdf test.pdf: test.tex ################################################################################ # # Install the appropriate files on the web server. This relies on the # environment variable HANDBOOK_INSTALL_DIRECTORY being defined, and # (assuming that this variable points to a directory on the network) the # appropriate share has been mounted. # # See build_document_rules.make for an explanation of why the install # uses a foreach. # # Note that this won't do anything clever if you give it files that are # in subdirectories of the current directory. Everything will be flattened # at the other end. That is, something like "images/foo.pdf" will go into # the installation directory as "foo.pdf", not "images/foo.pdf". # install: @announce "Copying files to web server --- make sure that you have the share mounted!" @test -d $(HANDBOOK_INSTALL_ROOT) @mkdir -p $(INSTALL_DIRECTORY) @$(foreach f,$(INSTALL_FILES),if test ! -f $(INSTALL_DIRECTORY)/$(f) -o $(f) -nt $(INSTALL_DIRECTORY)/$(f); then echo "Installing $(f)"; cp $(f) $(INSTALL_DIRECTORY); fi;) ################################################################################ # # Debugging: print the values of the standard variables. # debug: @announce Externally defined variables @echo "TEACHING_SHARED = [$(TEACHING_SHARED)]" @echo "HANDBOOK_INSTALL_ROOT = [$(HANDBOOK_INSTALL_ROOT)]" @echo "CHAPTER = [$(CHAPTER)]" @announce Internally defined variables @echo "SUBJECT_CODE = [$(SUBJECT_CODE)]" @echo "PAPER_NUMBER = [$(PAPER_NUMBER)]" @echo "GLOBAL_HANDBOOK_INCLUDE = [$(GLOBAL_HANDBOOK_INCLUDE)]" @echo "INSTALL_DIRECTORY = [$(INSTALL_DIRECTORY)]" @echo "INSTALL_FILES = [$(INSTALL_FILES)]" @echo "SLIDE_IMAGES = [$(SLIDE_IMAGES)]" @echo "SLIDE_BACKGROUNDS = [$(SLIDE_BACKGROUNDS)]" @echo "SLIDE_FILES = [$(SLIDE_FILES)]" @echo "FIG_IMAGES = [$(FIG_IMAGES)]" @echo "FIG_FILES = [$(FIG_FILES)]" @echo "TIDY_FILES = [$(TIDY_FILES)]" @echo "CLEAN_FILES = [$(CLEAN_FILES)]" @echo "DRAFT = [$(DRAFT)]" @echo "LATEX_OPTS = [$(LATEX_OPTS)]" @echo "SLIDES = [$(SLIDES)]" @echo "FIGURES = [$(FIGURES)]" @echo "COMBINED = [$(COMBINED)]" @echo "NOTES = [$(NOTES)]" @echo "SLIDES_PREREQS = [$(SLIDES_PREREQS)]" @echo "COMBINED_PREREQS = [$(COMBINED_PREREQS)]" @echo "TARGETS = [$(TARGETS)]" ################################################################################ # # Clean up: get rid of all the temporary files. # tidy: rm -f $(TIDY_FILES) # # Clean up: get rid of everything except the original source. # clean: tidy rm -f $(CLEAN_FILES) ################################################################################ # # List all "phony" build targets. # targets: @echo "targets: $(TARGETS)" ################################################################################ # # Standard default rules. # include $(GLOBAL_HANDBOOK_INCLUDE)/standard_rules.make

Ignore Space Show notes View

make-includes/build_lecture_rules.make

################################################################################
#
# File: $Id$
#
# Standard variables and rules for building a set of lecture files.
# Altering these definitions will affect ALL LECTURE MAKEFILES FOR ALL
# PAPERS!! If you need to do something specific for a particular paper,
# include a custom rule in its makefile. DON'T add it here!
#
################################################################################

################################################################################
#
# Add standard file suffixes.
#
include $(GLOBAL_HANDBOOK_INCLUDE)/standard_suffixes.make

################################################################################
#
# Standard directories.
#
IMGDIR=images

################################################################################
#
# Standard paths.
#
include $(GLOBAL_HANDBOOK_INCLUDE)/standard_paths.make

################################################################################
#
# Files to be cleaned by the various "clean" targets. Note that we don't
# "tidy" .aux files because they may be needed by the xr package for inter-
# document cross references, but won't get regenerated if the final target
# PDF files exist. They will be caught by by the "clean" target though.
#
TIDY_FILES+=*.tmp *.out *.log *.nav *.toc *.snm *.head *.dvi \
	slides-combined.pdf slides-notes.pdf
CLEAN_FILES+=*.aux *.pdf

################################################################################
#
# Various environment variables.
#
include $(GLOBAL_HANDBOOK_INCLUDE)/standard_environment.make
#
# Base file names for the various documents.
#
SLIDES?=Chapter$(CHAPTER)slides
FIGURES?=Chapter$(CHAPTER)figures
COMBINED?=Chapter$(CHAPTER)combined
NOTES?=Chapter$(CHAPTER)notes
#
# Standard files to be installed on the web server.
#
ifneq ($(strip $(SLIDES)),)
INSTALL_FILES+=$(SLIDES).pdf
endif
ifneq ($(strip $(FIGURES)),)
INSTALL_FILES+=$(FIGURES).pdf $(FIGURES)-reduced.pdf
endif
ifneq ($(strip $(COMBINED)),)
INSTALL_FILES+=$(COMBINED).pdf
endif
#
# List of standard "phony" build targets.
#
TARGETS+=slides notes slides-combined slides-notes figures figures2up combined
#
.PHONY: $(TARGETS)

################################################################################
#
# Display a message if someone tries to build a target that has been
# disabled (by setting the appropriate variable to empty in the makefile).
#
disabled_message=@echo The \"$(1)\" target has been disabled for this chapter.

################################################################################
#
# Build everything.
#
all: slides notes figures figures2up combined

################################################################################
#
# Build presentation slides. If $(SLIDES) is empty, these rules are ignored.
#
ifneq ($(strip $(SLIDES)),)

#
# Set the prerequisites for the "slides" build target, depending on
# whether the figures document exists. If $(FIGURES) is non-empty, we need
# to include the figures .aux file for inter-document cross-references.
#
ifeq ($(strip $(FIGURES)),)
SLIDES_PREREQS:=$(SLIDES).pdf
else
SLIDES_PREREQS:=figures $(SLIDES).pdf
endif

#
# Build the slides for the presentation.
#
slides: $(SLIDES_PREREQS)

$(SLIDES).pdf: $(SLIDES).tex $(SLIDE_IMAGES) $(SLIDE_BACKGROUNDS) $(SLIDE_FILES)
	pdflatex --jobname=$(SLIDES) '\documentclass[$(LATEX_OPTS)]{lectureslides}\input{$(SLIDES)}'
	pdflatex --jobname=$(SLIDES) '\documentclass[$(LATEX_OPTS)]{lectureslides}\input{$(SLIDES)}'

else

slides:
	$(call disabled_message,$@)

endif

################################################################################
#
# Build the presentation notes. If $(NOTES) is empty, these rules are
# ignored.
#
ifneq ($(strip $(NOTES)),)

#
# Build the slides with notes.
#
slides-notes: slides-notes.pdf

slides-notes.pdf: $(SLIDES).tex $(SLIDE_IMAGES) $(SLIDE_BACKGROUNDS) $(SLIDE_FILES)
	pdflatex --jobname=slides-notes '\documentclass[$(LATEX_OPTS),notes=onlyslideswithnotes]{lectureslides}\input{$(SLIDES)}'
	pdflatex --jobname=slides-notes '\documentclass[$(LATEX_OPTS),notes=onlyslideswithnotes]{lectureslides}\input{$(SLIDES)}'

#
# Build the slides with notes, 6-up.
#
notes: $(NOTES).pdf

$(NOTES).pdf: $(NOTES).tex slides-notes.pdf
	pdflatex $<
	pdflatex $<

else

notes slides-notes:
	$(call disabled_message,$@)

endif

################################################################################
#
# Build the complete combined lecture document. If $(COMBINED) is empty,
# these rules are ignored.
#
ifneq ($(strip $(COMBINED)),)

#
# Set the prerequisites for the "combined" build target, depending on
# whether the figures document exists. If $(FIGURES) is empty, they are
# omitted from the combined document.
#
ifeq ($(strip $(FIGURES)),)
COMBINED_PREREQS:=$(COMBINED).tex slides-combined.pdf
else
COMBINED_PREREQS:=$(COMBINED).tex slides-combined.pdf $(FIGURES).pdf
endif

#
# Build the slides for the combined document.
#
slides-combined: slides-combined.pdf

slides-combined.pdf: $(SLIDES).tex $(SLIDE_IMAGES) $(SLIDE_BACKGROUNDS)
	pdflatex --jobname=slides-combined '\documentclass[$(LATEX_OPTS),handout]{lectureslides}\input{$(SLIDES)}'
	pdflatex --jobname=slides-combined '\documentclass[$(LATEX_OPTS),handout]{lectureslides}\input{$(SLIDES)}'

#
# Build the complete combined document.
#
combined: $(COMBINED).pdf

$(COMBINED).pdf: $(COMBINED_PREREQS) $(COMBI_IMAGES) $(COMBI_FILES)
	pdflatex $<
	pdflatex $<

else

combined slides-combined:
	$(call disabled_message,$@)

endif

################################################################################
#
# Build the figures and examples document. If $(FIGURES) is empty, these
# rules are ignored.
#
ifneq ($(strip $(FIGURES)),)

figures: $(FIGURES).pdf

$(FIGURES).pdf: $(FIGURES).tex $(FIG_IMAGES) $(FIG_FILES)
	pdflatex $<
	pdflatex $<

figures2up: $(FIGURES)-reduced.pdf

$(FIGURES)-reduced.pdf: $(FIGURES).pdf
	pdfnup $< --nup 2x1 --outfile $@

else

figures figures2up:
	$(call disabled_message,$@)

endif

################################################################################
#
# Build the test document.
#
test: test.pdf

test.pdf: test.tex

################################################################################
#
# Install the appropriate files on the web server. This relies on the
# environment variable HANDBOOK_INSTALL_DIRECTORY being defined, and
# (assuming that this variable points to a directory on the network) the
# appropriate share has been mounted.
#
# See build_document_rules.make for an explanation of why the install
# uses a foreach.
#
# Note that this won't do anything clever if you give it files that are
# in subdirectories of the current directory. Everything will be flattened
# at the other end. That is, something like "images/foo.pdf" will go into
# the installation directory as "foo.pdf", not "images/foo.pdf".
#
install:
	@announce "Copying files to web server --- make sure that you have the share mounted!"
	@test -d $(HANDBOOK_INSTALL_ROOT)
	@mkdir -p $(INSTALL_DIRECTORY)
	@$(foreach f,$(INSTALL_FILES),if test ! -f $(INSTALL_DIRECTORY)/$(f) -o $(f) -nt $(INSTALL_DIRECTORY)/$(f); then echo "Installing $(f)"; cp $(f) $(INSTALL_DIRECTORY); fi;)

################################################################################
#
# Debugging: print the values of the standard variables.
#
debug:
	@announce Externally defined variables
	@echo "TEACHING_SHARED = [$(TEACHING_SHARED)]"
	@echo "HANDBOOK_INSTALL_ROOT = [$(HANDBOOK_INSTALL_ROOT)]"
	@echo "CHAPTER = [$(CHAPTER)]"
	@announce Internally defined variables
	@echo "SUBJECT_CODE = [$(SUBJECT_CODE)]"
	@echo "PAPER_NUMBER = [$(PAPER_NUMBER)]"
	@echo "GLOBAL_HANDBOOK_INCLUDE = [$(GLOBAL_HANDBOOK_INCLUDE)]"
	@echo "INSTALL_DIRECTORY = [$(INSTALL_DIRECTORY)]"
	@echo "INSTALL_FILES = [$(INSTALL_FILES)]"
	@echo "SLIDE_IMAGES = [$(SLIDE_IMAGES)]"
	@echo "SLIDE_BACKGROUNDS = [$(SLIDE_BACKGROUNDS)]"
	@echo "SLIDE_FILES = [$(SLIDE_FILES)]"
	@echo "FIG_IMAGES = [$(FIG_IMAGES)]"
	@echo "FIG_FILES = [$(FIG_FILES)]"
	@echo "TIDY_FILES = [$(TIDY_FILES)]"
	@echo "CLEAN_FILES = [$(CLEAN_FILES)]"
	@echo "DRAFT = [$(DRAFT)]"
	@echo "LATEX_OPTS = [$(LATEX_OPTS)]"
	@echo "SLIDES = [$(SLIDES)]"
	@echo "FIGURES = [$(FIGURES)]"
	@echo "COMBINED = [$(COMBINED)]"
	@echo "NOTES = [$(NOTES)]"
	@echo "SLIDES_PREREQS = [$(SLIDES_PREREQS)]"
	@echo "COMBINED_PREREQS = [$(COMBINED_PREREQS)]"
	@echo "TARGETS = [$(TARGETS)]"

################################################################################
#
# Clean up: get rid of all the temporary files.
#
tidy:
	rm -f $(TIDY_FILES)
#
# Clean up: get rid of everything except the original source.
#
clean: tidy
	rm -f $(CLEAN_FILES)

################################################################################
#
# List all "phony" build targets.
#
targets:
	@echo "targets: $(TARGETS)"

################################################################################
#
# Standard default rules.
#
include $(GLOBAL_HANDBOOK_INCLUDE)/standard_rules.make

################################################################################
#
# Add standard file suffixes.
#
include $(GLOBAL_HANDBOOK_INCLUDE)/standard_suffixes.make

################################################################################
#
# Standard directories.
#
IMGDIR=images

################################################################################
#
# Standard paths.
#
include $(GLOBAL_HANDBOOK_INCLUDE)/standard_paths.make

################################################################################
#
# Build everything.
#
all: slides notes figures figures2up combined

################################################################################
#
# Build presentation slides. If $(SLIDES) is empty, these rules are ignored.
#
ifneq ($(strip $(SLIDES)),)

#
# Build the slides for the presentation.
#
slides: $(SLIDES_PREREQS)

else

slides:
	$(call disabled_message,$@)

endif

################################################################################
#
# Build the presentation notes. If $(NOTES) is empty, these rules are
# ignored.
#
ifneq ($(strip $(NOTES)),)

#
# Build the slides with notes.
#
slides-notes: slides-notes.pdf

#
# Build the slides with notes, 6-up.
#
notes: $(NOTES).pdf

$(NOTES).pdf: $(NOTES).tex slides-notes.pdf
	pdflatex $<
	pdflatex $<

else

notes slides-notes:
	$(call disabled_message,$@)

endif

#
# Build the slides for the combined document.
#
slides-combined: slides-combined.pdf

#
# Build the complete combined document.
#
combined: $(COMBINED).pdf

$(COMBINED).pdf: $(COMBINED_PREREQS) $(COMBI_IMAGES) $(COMBI_FILES)
	pdflatex $<
	pdflatex $<

else

combined slides-combined:
	$(call disabled_message,$@)

endif

figures: $(FIGURES).pdf

$(FIGURES).pdf: $(FIGURES).tex $(FIG_IMAGES) $(FIG_FILES)
	pdflatex $<
	pdflatex $<

figures2up: $(FIGURES)-reduced.pdf

$(FIGURES)-reduced.pdf: $(FIGURES).pdf
	pdfnup $< --nup 2x1 --outfile $@

else

figures figures2up:
	$(call disabled_message,$@)

endif

################################################################################
#
# Build the test document.
#
test: test.pdf

test.pdf: test.tex

################################################################################
#
# List all "phony" build targets.
#
targets:
	@echo "targets: $(TARGETS)"

################################################################################
#
# Standard default rules.
#
include $(GLOBAL_HANDBOOK_INCLUDE)/standard_rules.make

Ignore Space Show notes View make-includes/build_misc_rules.make
################################################################################ # # File: $Id$ # # Standard variables and rules for building a general standalone document # that doesn't fall into any partcular category (such as lecture, tutorial). # The makefile assumes a single document source file. Anything more # complex than this will need to be handled by a custom makefile. # # Altering these definitions will affect ALL MAKEFILES FOR ALL PAPERS!! If # you need to do something specific for a particular paper, include a # custom rule in its makefile. DON'T add it here! # ################################################################################ ################################################################################ # # Include XSLT functions. # include $(TEACHING_SHARED)/Authoring/Handbook/make-includes/xslt_functions.make ################################################################################ # # Required make variables. These should be defined by the calling makefile. # # BASE_NAME # The base name of the document source file. # BASE_NAME?=$(error The required make variable BASE_NAME has not been defined. Please set it to the base name of the document source file) ################################################################################ # # Add standard file suffixes. # include $(GLOBAL_HANDBOOK_INCLUDE)/standard_suffixes.make ################################################################################ # # Standard directories. # IMGDIR=images ################################################################################ # # Standard paths. # include $(GLOBAL_HANDBOOK_INCLUDE)/standard_paths.make ################################################################################ # # Files to be cleaned by the various "clean" targets. Note that we don't # "tidy" .aux files because they may be needed by the xr package for inter- # document cross references, but won't get regenerated if the final target # PDF files exist. They will be caught by by the "clean" target though. # TIDY_FILES+=.tmp .out .log .nav .toc .snm .head .dvi \ -derived.xml CLEAN_FILES+=.aux .pdf .html ################################################################################ # # Various environment variables. # include $(GLOBAL_HANDBOOK_INCLUDE)/standard_environment.make # # List of standard "phony" build targets. # TARGETS+=web print print2up # .PHONY: $(TARGETS) ################################################################################ # # Build everything. # all: web print print2up ################################################################################ # # Build print version, 1-up or 2-up. # print: $(BASE_NAME).pdf $(BASE_NAME).pdf: $(BASE_NAME).tex $(PRINT_IMAGES) $(PRINT_FILES) $(BASENAME).tex: $(BASE_NAME)-derived.xml print2up: $(BASE_NAME)-2up.pdf $(BASE_NAME)-2up.pdf: $(BASE_NAME).pdf ################################################################################ # # Build web version. # web: $(BASE_NAME).html $(BASE_NAME).html: $(BASE_NAME)-derived.xml $(WEB_IMAGES) $(WEB_FILES) ################################################################################ # # Build the test document. # test: test.pdf test.pdf: test.tex ################################################################################ # # Debugging: print the values of the standard variables. # debug: @announce Externally defined variables @echo "TEACHING_SHARED = [$(TEACHING_SHARED)]" @announce Internally defined variables @echo "GLOBAL_HANDBOOK_INCLUDE = [$(GLOBAL_HANDBOOK_INCLUDE)]" @echo "BASE_NAME = [$(BASE_NAME)]" @echo "PRINT_IMAGES = [$(PRINT_IMAGES)]" @echo "PRINT_FILES = [$(PRINT_FILES)]" @echo "WEB_IMAGES = [$(WEB_IMAGES)]" @echo "WEB_FILES = [$(WEB_FILES)]" @echo "TIDY_FILES = [$(TIDY_FILES)]" @echo "CLEAN_FILES = [$(CLEAN_FILES)]" @echo "DRAFT = [$(DRAFT)]" @echo "LATEX_OPTS = [$(LATEX_OPTS)]" @echo "TARGETS = [$(TARGETS)]" ################################################################################ # # Clean up: get rid of all the temporary files. # tidy: rm -f $(TIDY_FILES) # # Clean up: get rid of everything except the original source. # clean: tidy rm -f $(CLEAN_FILES) ################################################################################ # # List all "phony" build targets. # targets: @echo "targets: $(TARGETS)" ################################################################################ # # Standard default rules. # include $(GLOBAL_HANDBOOK_INCLUDE)/standard_rules.make ################################################################################ # # File: $Id$ # # Standard variables and rules for building a general standalone document # that doesn't fall into any partcular category (such as lecture, tutorial). # The makefile assumes a single document source file. Anything more # complex than this will need to be handled by a custom makefile. # # Altering these definitions will affect ALL MAKEFILES FOR ALL PAPERS!! If # you need to do something specific for a particular paper, include a # custom rule in its makefile. DON'T add it here! # ################################################################################ ################################################################################ # # Include XSLT functions. # include $(TEACHING_SHARED)/Authoring/Handbook/make-includes/xslt_functions.make ################################################################################ # # Required make variables. These should be defined by the calling makefile. # # BASE_NAME # The base name of the document source file. # BASE_NAME?=$(error The required make variable BASE_NAME has not been defined. Please set it to the base name of the document source file) ################################################################################ # # Add standard file suffixes. # include $(GLOBAL_HANDBOOK_INCLUDE)/standard_suffixes.make ################################################################################ # # Standard directories. # IMGDIR=images ################################################################################ # # Standard paths. # include $(GLOBAL_HANDBOOK_INCLUDE)/standard_paths.make ################################################################################ # # Files to be cleaned by the various "clean" targets. Note that we don't # "tidy" .aux files because they may be needed by the xr package for inter- # document cross references, but won't get regenerated if the final target # PDF files exist. They will be caught by by the "clean" target though. # TIDY_FILES+=.tmp .out .log .nav .toc .snm .head .dvi \ -derived.xml $(IMGDIR)/-crop.pdf CLEAN_FILES+=.aux .pdf *.html ################################################################################ # # Various environment variables. # include $(GLOBAL_HANDBOOK_INCLUDE)/standard_environment.make # # List of standard "phony" build targets. # TARGETS+=web print print2up # .PHONY: $(TARGETS) ################################################################################ # # Build everything. # all: web print print2up ################################################################################ # # Build print version, 1-up or 2-up. # print: $(BASE_NAME).pdf $(BASE_NAME).pdf: $(BASE_NAME).tex $(PRINT_IMAGES) $(PRINT_FILES) $(BASENAME).tex: $(BASE_NAME)-derived.xml print2up: $(BASE_NAME)-2up.pdf $(BASE_NAME)-2up.pdf: $(BASE_NAME).pdf ################################################################################ # # Build web version. # web: $(BASE_NAME).html $(BASE_NAME).html: $(BASE_NAME)-derived.xml $(WEB_IMAGES) $(WEB_FILES) ################################################################################ # # Build the test document. # test: test.pdf test.pdf: test.tex ################################################################################ # # Debugging: print the values of the standard variables. # debug: @announce Externally defined variables @echo "TEACHING_SHARED = [$(TEACHING_SHARED)]" @announce Internally defined variables @echo "GLOBAL_HANDBOOK_INCLUDE = [$(GLOBAL_HANDBOOK_INCLUDE)]" @echo "BASE_NAME = [$(BASE_NAME)]" @echo "PRINT_IMAGES = [$(PRINT_IMAGES)]" @echo "PRINT_FILES = [$(PRINT_FILES)]" @echo "WEB_IMAGES = [$(WEB_IMAGES)]" @echo "WEB_FILES = [$(WEB_FILES)]" @echo "TIDY_FILES = [$(TIDY_FILES)]" @echo "CLEAN_FILES = [$(CLEAN_FILES)]" @echo "DRAFT = [$(DRAFT)]" @echo "LATEX_OPTS = [$(LATEX_OPTS)]" @echo "TARGETS = [$(TARGETS)]" ################################################################################ # # Clean up: get rid of all the temporary files. # tidy: rm -f $(TIDY_FILES) # # Clean up: get rid of everything except the original source. # clean: tidy rm -f $(CLEAN_FILES) ################################################################################ # # List all "phony" build targets. # targets: @echo "targets: $(TARGETS)" ################################################################################ # # Standard default rules. # include $(GLOBAL_HANDBOOK_INCLUDE)/standard_rules.make

Ignore Space Show notes View

make-includes/build_misc_rules.make

################################################################################
#
# File: $Id$
#
# Standard variables and rules for building a general standalone document
# that doesn't fall into any partcular category (such as lecture, tutorial).
# The makefile assumes a single document source file. Anything more
# complex than this will need to be handled by a custom makefile.
#
# Altering these definitions will affect ALL MAKEFILES FOR ALL PAPERS!! If
# you need to do something specific for a particular paper, include a
# custom rule in its makefile. DON'T add it here!
#
################################################################################

################################################################################
#
# Include XSLT functions.
#
include $(TEACHING_SHARED)/Authoring/Handbook/make-includes/xslt_functions.make

################################################################################
#
# Required make variables. These should be defined by the calling makefile.
#
# BASE_NAME
#	The base name of the document source file.
#
BASE_NAME?=$(error The required make variable BASE_NAME has not been defined. Please set it to the base name of the document source file)

################################################################################
#
# Add standard file suffixes.
#
include $(GLOBAL_HANDBOOK_INCLUDE)/standard_suffixes.make

################################################################################
#
# Standard directories.
#
IMGDIR=images

################################################################################
#
# Standard paths.
#
include $(GLOBAL_HANDBOOK_INCLUDE)/standard_paths.make

################################################################################
#
# Build everything.
#
all: web print print2up

################################################################################
#
# Build print version, 1-up or 2-up.
#
print: $(BASE_NAME).pdf

$(BASE_NAME).pdf: $(BASE_NAME).tex $(PRINT_IMAGES) $(PRINT_FILES)

$(BASENAME).tex: $(BASE_NAME)-derived.xml

print2up: $(BASE_NAME)-2up.pdf

$(BASE_NAME)-2up.pdf: $(BASE_NAME).pdf

################################################################################
#
# Build web version.
#
web: $(BASE_NAME).html

$(BASE_NAME).html: $(BASE_NAME)-derived.xml $(WEB_IMAGES) $(WEB_FILES)

################################################################################
#
# Build the test document.
#
test: test.pdf

test.pdf: test.tex

################################################################################
#
# Debugging: print the values of the standard variables.
#
debug:
	@announce Externally defined variables
	@echo "TEACHING_SHARED = [$(TEACHING_SHARED)]"
	@announce Internally defined variables
	@echo "GLOBAL_HANDBOOK_INCLUDE = [$(GLOBAL_HANDBOOK_INCLUDE)]"
	@echo "BASE_NAME = [$(BASE_NAME)]"
	@echo "PRINT_IMAGES = [$(PRINT_IMAGES)]"
	@echo "PRINT_FILES = [$(PRINT_FILES)]"
	@echo "WEB_IMAGES = [$(WEB_IMAGES)]"
	@echo "WEB_FILES = [$(WEB_FILES)]"
	@echo "TIDY_FILES = [$(TIDY_FILES)]"
	@echo "CLEAN_FILES = [$(CLEAN_FILES)]"
	@echo "DRAFT = [$(DRAFT)]"
	@echo "LATEX_OPTS = [$(LATEX_OPTS)]"
	@echo "TARGETS = [$(TARGETS)]"

################################################################################
#
# List all "phony" build targets.
#
targets:
	@echo "targets: $(TARGETS)"

################################################################################
#
# Standard default rules.
#
include $(GLOBAL_HANDBOOK_INCLUDE)/standard_rules.make

################################################################################
#
# Include XSLT functions.
#
include $(TEACHING_SHARED)/Authoring/Handbook/make-includes/xslt_functions.make

################################################################################
#
# Add standard file suffixes.
#
include $(GLOBAL_HANDBOOK_INCLUDE)/standard_suffixes.make

################################################################################
#
# Standard directories.
#
IMGDIR=images

################################################################################
#
# Standard paths.
#
include $(GLOBAL_HANDBOOK_INCLUDE)/standard_paths.make

################################################################################
#
# Files to be cleaned by the various "clean" targets. Note that we don't
# "tidy" .aux files because they may be needed by the xr package for inter-
# document cross references, but won't get regenerated if the final target
# PDF files exist. They will be caught by by the "clean" target though.
#
TIDY_FILES+=*.tmp *.out *.log *.nav *.toc *.snm *.head *.dvi \
	*-derived.xml $(IMGDIR)/*-crop.pdf
CLEAN_FILES+=*.aux *.pdf *.html

################################################################################
#
# Build everything.
#
all: web print print2up

################################################################################
#
# Build print version, 1-up or 2-up.
#
print: $(BASE_NAME).pdf

$(BASE_NAME).pdf: $(BASE_NAME).tex $(PRINT_IMAGES) $(PRINT_FILES)

$(BASENAME).tex: $(BASE_NAME)-derived.xml

print2up: $(BASE_NAME)-2up.pdf

$(BASE_NAME)-2up.pdf: $(BASE_NAME).pdf

################################################################################
#
# Build web version.
#
web: $(BASE_NAME).html

$(BASE_NAME).html: $(BASE_NAME)-derived.xml $(WEB_IMAGES) $(WEB_FILES)

################################################################################
#
# Build the test document.
#
test: test.pdf

test.pdf: test.tex

################################################################################
#
# Debugging: print the values of the standard variables.
#
debug:
	@announce Externally defined variables
	@echo "TEACHING_SHARED = [$(TEACHING_SHARED)]"
	@announce Internally defined variables
	@echo "GLOBAL_HANDBOOK_INCLUDE = [$(GLOBAL_HANDBOOK_INCLUDE)]"
	@echo "BASE_NAME = [$(BASE_NAME)]"
	@echo "PRINT_IMAGES = [$(PRINT_IMAGES)]"
	@echo "PRINT_FILES = [$(PRINT_FILES)]"
	@echo "WEB_IMAGES = [$(WEB_IMAGES)]"
	@echo "WEB_FILES = [$(WEB_FILES)]"
	@echo "TIDY_FILES = [$(TIDY_FILES)]"
	@echo "CLEAN_FILES = [$(CLEAN_FILES)]"
	@echo "DRAFT = [$(DRAFT)]"
	@echo "LATEX_OPTS = [$(LATEX_OPTS)]"
	@echo "TARGETS = [$(TARGETS)]"

################################################################################
#
# List all "phony" build targets.
#
targets:
	@echo "targets: $(TARGETS)"

################################################################################
#
# Standard default rules.
#
include $(GLOBAL_HANDBOOK_INCLUDE)/standard_rules.make

Show line notes below