- Added install targets. - Now includes paper variables include file. - Added conditionals to clean targets to check whether the "clean lists" are empty.

nigel.stanger / Handbook

Browse code - Added install targets. - Now includes paper variables include file. - Added conditionals to clean targets to check whether the "clean lists" are empty. master
1 parent c7262c2 commit fc32bcdfcc83ae5bcbe7c0eb0eb83dc3e2f763c5 nstanger authored on 19 Jan 2005

Patch

Showing 2 changed files

Ignore Space Show notes View make-includes/build_document_rules.make
################################################################################ # # File: $Id$ # # Standard variables and rules for building a particular document within a # section of the handbook (e.g., a single tutorial). Altering these # definitions will affect ALL DOCUMENT MAKEFILES FOR ALL PAPERS!! If you # need to do something specific for a particular paper, include a custom # rule in its makefile. DON'T add it here! # ################################################################################ ################################################################################ # # Run one-time initialisation stuff, _unless_ NOINIT is defined. Any # "parent" makefile that's already done the same one-time initialisation # and calls this one should define NOINIT (the value doesn't matter) to # switch off one-time initialisation in this makefile. Thus if the # "parent" makefile calls this makefile several times, things like the # content checking will only happen once for a single invocation of the # "parent" makefile. # # When running this makefile standalone, _don't_ define NOINIT, and # everything will still work as expected. # ifndef NOINIT include $(GLOBAL_HANDBOOK_INCLUDE)/remove_content_marker_files.make endif ################################################################################ # # Include variables defining the current paper. # include $(LOCAL_HANDBOOK_INCLUDE)/paper_variables.make ################################################################################ # # We make quite a lot of reference to files in the handbook directory, # so set a variable to point to it. PAPER_ROOT is defined in the include # file paper_variables.make. # HANDBOOK_ROOT:=$(PAPER_ROOT)/Handbook ################################################################################ # # Include XSLT functions. # include $(GLOBAL_HANDBOOK_INCLUDE)/xslt_functions.make ################################################################################ # # Defines which section we are currently building. This is actually the # path to the main folder for the section. Normally this is passed in as # an argument to make from a higher-level makefile (i.e., "make # SECTION=path/to/section"). # # Hmm, sh seems to convert uppercase letters in my paths to lowercase. # I'm not sure whether this will break anything or not... # # I _can_ confirm that having spaces anywhere in the parent path causes # serious breakage, because notdir returns bogus results in such cases. # All of the make functions assume whitespace delimitation, and there # doesn't seem to be any obvious way to work around this other than # eliminating spaces from the parent path (quoting the result of the # shell function below makes no difference). Fortunately, this is pretty # easy to do :) # # SECTION?=$(notdir $(shell cd ..; pwd)) ################################################################################ # # Set up the context for the current document. # # We use the same base name for both the directory and the document, which # makes life very easy :) # BASE_NAME:=$(notdir $(CURDIR)) # # SOURCE_XML is the original source XML, from which DERIVED_XML is # generated (the derived source has the includes for questions, etc., # inserted). # SOURCE_XML:=$(BASE_NAME).xml DERIVED_XML:=$(SOURCE_XML:.xml=-derived.xml) # # Define the names of the output files. # WEB_QUESTIONS_HTML:=$(BASE_NAME)-questions.html WEB_ANSWERS_HTML:=$(BASE_NAME)-answers.html PRINT_QUESTIONS_TEX:=$(WEB_QUESTIONS_HTML:.html=.tex) PRINT_ANSWERS_TEX:=$(WEB_ANSWERS_HTML:.html=.tex) PRINT_QUESTIONS_PDF_1UP:=$(PRINT_QUESTIONS_TEX:.tex=.pdf) PRINT_ANSWERS_PDF_1UP:=$(PRINT_ANSWERS_TEX:.tex=.pdf) PRINT_QUESTIONS_PDF_2UP:=$(PRINT_QUESTIONS_TEX:.tex=-2up.pdf) PRINT_ANSWERS_PDF_2UP:=$(PRINT_ANSWERS_TEX:.tex=-2up.pdf) # # Groupings of various web- and print-related files, for easy reference. # Feel free to add to these as necessary :) # DERIVED_WEB_FILES:=$(WEB_QUESTIONS_HTML) $(WEB_ANSWERS_HTML) DERIVED_PRINT_FILES:=$(PRINT_QUESTIONS_TEX) $(PRINT_ANSWERS_TEX) \ $(PRINT_QUESTIONS_PDF_1UP) $(PRINT_ANSWERS_PDF_1UP) \ $(PRINT_QUESTIONS_PDF_2UP) $(PRINT_ANSWERS_PDF_2UP) ################################################################################ # # Extract the list of included filenames from the source template. Hooray # for the shell function and Perl! Include file paths are delimited by # <@INC[ ]@>. All paths are relative to $(PAPER_ROOT). We don't use # $(PAPER_ROOT)/$(SECTION), because some of the include directories may be # in relatively arbitrary locations. # CONTENT_SRC:=$(shell perl -ne 'print "$(PAPER_ROOT)/$(notdir $(SECTION))/$$1\n" if /<\@INC\[([^]]+)\]@>/;' $(SOURCE_XML)) ################################################################################ # # Directory to install files into on web server. # INSTALL_DIRECTORY:=$(HANDBOOK_INSTALL_ROOT)/$(SUBJECT_CODE)$(PAPER_NUMBER)/www/$(SECTION)/$(BASE_NAME) ################################################################################ # # Files to be installed on web server. # QUESTION_INSTALL_FILES:=$(WEB_QUESTIONS_HTML) $(PRINT_QUESTIONS_PDF_1UP) \ $(PRINT_QUESTIONS_PDF_2UP) $(wildcard .png) ANSWER_INSTALL_FILES:=$(WEB_ANSWERS_HTML) $(PRINT_ANSWERS_PDF_1UP) \ $(PRINT_ANSWERS_PDF_2UP) ################################################################################ # # Lists of files for cleaning up. Add to these (using +=) as necessary in # derived makefiles. # WEB_CLEAN_FILES:=$(DERIVED_WEB_FILES) .png PRINT_CLEAN_FILES:=$(DERIVED_PRINT_FILES) .pdf ALL_CLEAN_FILES:=$(DERIVED_XML) $(WEB_CLEAN_FILES) $(PRINT_CLEAN_FILES) ################################################################################ # # List of possible targets. If you need to add to this for a specific # case, use TARGETS+=xxx in the actual makefile. # TARGETS:=all content targets debug install-questions install-answers \ web web-questions web-answers \ print print-questions print-answers \ questions answers \ clean web-clean print-clean .PHONY: $(TARGETS) ################################################################################ # # Build everything. # all: web print ################################################################################ # # Build questions or answers only. # questions: web-questions print-questions answers: web-answers print-answers ################################################################################ # # Build web version only. # web: web-questions web-answers web-questions: content $(WEB_QUESTIONS_HTML) $(WEB_QUESTIONS_HTML): $(DERIVED_XML) @announce "Building $@ from $<" $(call xslt,$<,xml2html.xsl,$(call xslt_parameter,department,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper,'$(PAPER_NUMBER)'),$(call xslt_parameter,standalone,'no'),$(call xslt_parameter,showanswers,'no'),$(call xslt_parameter,base-path,'.'),$(call xslt_parameter,image-format,'png')) > $@ web-answers: content $(WEB_ANSWERS_HTML) $(WEB_ANSWERS_HTML): $(DERIVED_XML) @announce "Building $@ from $<" $(call xslt,$<,xml2html.xsl,$(call xslt_parameter,department,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper,'$(PAPER_NUMBER)'),$(call xslt_parameter,standalone,'no'),$(call xslt_parameter,showanswers,'yes'),$(call xslt_parameter,base-path,'.'),$(call xslt_parameter,image-format,'png')) > $@ ################################################################################ # # Build print version only. We add code to the LaTeX source to mark the # first and last pages of the document, so that an individual PDF for this # document can be generated later. \markfirstpage and \marklastpage are # macros defined in handbook_template.tex that write the current physical # page number to the .aux file. # print: print-questions print-answers print-questions: content $(PRINT_QUESTIONS_TEX) $(PRINT_QUESTIONS_TEX): $(DERIVED_XML) @announce "Building $@ from $<" @echo "\\markfirstpage{$(SECTION)/$(BASE_NAME)/$(@:.tex=.pdf)}" > $@ $(call xslt,$<,xml2latex.xsl,$(call xslt_parameter,department,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper,'$(PAPER_NUMBER)'),$(call xslt_parameter,standalone,'no'),$(call xslt_parameter,showanswers,'no'),$(call xslt_parameter,base-path,'Sections/$(SECTION)/$(BASE_NAME)'),$(call xslt_parameter,image-format,'pdf')) >> $@ @echo "\\marklastpage{$(SECTION)/$(BASE_NAME)/$(@:.tex=.pdf)}" >> $@ %-questions.pdf: %-questions.tex @announce "Generating $@" @$(if $(wildcard $(HANDBOOK_ROOT)/handbook.pdf),,$(error $(HANDBOOK_ROOT)/handbook.pdf is missing)) @gs -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=$@ \ -dFirstPage=$(shell grep '$@.1up.first' $(HANDBOOK_ROOT)/handbook.aux \| cut -d= -f2) \ -dLastPage=$(shell grep '$@.1up.last' $(HANDBOOK_ROOT)/handbook.aux \| cut -d= -f2) $(HANDBOOK_ROOT)/handbook.pdf %-questions-2up.pdf: %-questions.tex @announce "Generating $@" @$(if $(wildcard $(HANDBOOK_ROOT)/handbook-2up.pdf),,$(error $(HANDBOOK_ROOT)/handbook-2up.pdf is missing)) @gs -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=$@ \ -dFirstPage=$(shell grep '$(@:-2up.pdf=.pdf).2up.first' $(HANDBOOK_ROOT)/handbook.aux \| cut -d= -f2) \ -dLastPage=$(shell grep '$(@:-2up.pdf=.pdf).2up.last' $(HANDBOOK_ROOT)/handbook.aux \| cut -d= -f2) $(HANDBOOK_ROOT)/handbook-2up.pdf print-answers: content $(PRINT_ANSWERS_TEX) $(PRINT_ANSWERS_TEX): $(DERIVED_XML) @announce "Building $@ from $<" @echo "\\markfirstpage{$(SECTION)/$(BASE_NAME)/$(@:.tex=.pdf)}" > $@ $(call xslt,$<,xml2latex.xsl,$(call xslt_parameter,department,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper,'$(PAPER_NUMBER)'),$(call xslt_parameter,standalone,'no'),$(call xslt_parameter,showanswers,'yes'),$(call xslt_parameter,base-path,'Sections/$(SECTION)/$(BASE_NAME)'),$(call xslt_parameter,image-format,'pdf')) >> $@ @echo "\\marklastpage{$(SECTION)/$(BASE_NAME)/$(@:.tex=.pdf)}" >> $@ %-answers.pdf: %-answers.tex @announce "Generating $@" @$(if $(wildcard $(HANDBOOK_ROOT)/handbook-answers.pdf),,$(error $(HANDBOOK_ROOT)/handbook-answers.pdf is missing)) @gs -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=$@ \ -dFirstPage=$(shell grep '$@.1up.first' $(HANDBOOK_ROOT)/handbook-answers.aux \| cut -d= -f2) \ -dLastPage=$(shell grep '$@.1up.last' $(HANDBOOK_ROOT)/handbook-answers.aux \| cut -d= -f2) $(HANDBOOK_ROOT)/handbook-answers.pdf %-answers-2up.pdf: %-answers.tex @announce "Generating $@" @$(if $(wildcard $(HANDBOOK_ROOT)/handbook-answers-2up.pdf),,$(error $(HANDBOOK_ROOT)/handbook-answers-2up.pdf is missing)) @gs -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=$@ \ -dFirstPage=$(shell grep '$(@:-2up.pdf=.pdf).2up.first' $(HANDBOOK_ROOT)/handbook-answers.aux \| cut -d= -f2) \ -dLastPage=$(shell grep '$(@:-2up.pdf=.pdf).2up.last' $(HANDBOOK_ROOT)/handbook-answers.aux \| cut -d= -f2) $(HANDBOOK_ROOT)/handbook-answers-2up.pdf ################################################################################ # # Generate the derived XML source from the original XML template. The Big # Ugly Regexp matches any file include directive (<@INC[ ]@>) and the # script then simply inserts the content of that file into the output # stream. This saves us having to fool around with XML document includes, # which basically just don't work for us because they expect the included # document to be a valid XML document. We really just want to include XML # fragments. XInclude 1.0 supports this, but it's only just been finalised # at the time of writing (January 2005). # $(DERIVED_XML): $(SOURCE_XML) @announce "Generating $@" @perl -ne 'if (/^(.)<\@INC\[([^]]+)\]@>(.)$$/) { print "$$1\n" . `cat $(PAPER_ROOT)/$(SECTION)/$$2` . "\n$$3\n"; } else { print; }' $< > $@ ################################################################################ # # If any of the content files change, touch the XML template to # ensure that the document gets fully rebuilt. # $(SOURCE_XML): $(CONTENT_SRC) @touch $@ ################################################################################ # # Build the individual content files, etc., as necessary. Note above that # all the primary targets depend on the "content" target, _before_ # anything else. This ensures that the content gets rebuilt (if necessary) # before anything else happens. # # This may seem redundant, given that SOURCE_XML depends on CONTENT_SRC in # the rule above. However, this rule only works if we change one of the # actual content files. What if instead, we change a graphic associated # with one of the content files, without changing the content file itself? # In this case, make assumes that nothing needs to be done, because the # content file is older than the target, and this makefile knows nothing # about any dependencies that the content file might have (that's dealt # with by the makefile in the appropriate content directory). This is the # main downside of having independent makefiles. # # So, the slightly convoluted workaround using the empty "content" target # ensures that the content files will always be checked, regardless of # whether they've changed. If any of their prerequisites for a particular # content file change, then the content file itself will be touched, thus # activating the SOURCE_XML rule above. This process is particularly # important to ensure that associated graphics get rebuilt when they # change. # # All that aside, however, the _real_ trick is to ensure that this rule is # only executed once. If we do a "make", this rule would nominally get # executed four times (once for each of the targets that depend on # "content"). The first time through the rule, therefore, we create a # marker file called "content-checked". If this file exists, the rule # isn't executed. These marker files are cleaned up by a one-off find # command when the makefile is first run (see the include file # one-time-init.make). # # Note: using the wildcard function to test for the existence of the # marker file doesn't work when the makefile is run standalone, because # the function result is expanded at the time the makefile is _loaded_, # _before_ the one-time initialisation has a change to kick in and delete # the file. This has the rather bizarre side-effect of the makefile only # re-checking the content on every second run, and means that we can't use # make conditionals to control rule execution. The solution is to prefix # every command in the rule with "test ! -f" to check whether the marker # file exists. # # Ack! The tribulations of not using a monolithic makefile... # content: # Of course, there's little point in doing anything if there's no content! ifneq ($(strip $(CONTENT_SRC)),) @if test ! -f content-checked; then \ announce "Checking content for $(BASE_NAME)"; \ fi # Sanity check: do the content files referenced from the original source # actually exist? The "cat</dev/null" is included because there needs to # be something in the body of the if --- you can't just leave it empty. We # can use the wildcard function here because these files should already # exist --- if they don't, then by definition the filename is wrong! @if test ! -f content-checked; then \ $(foreach f,$(CONTENT_SRC),$(if $(wildcard $f),,$(error Content file $f referenced from $(SOURCE_XML) does not exist)) cat</dev/null;) \ fi # Remake each individual content file. @if test ! -f content-checked; then \ $(foreach f,$(CONTENT_SRC),$(MAKE) -C $(dir $f) $(notdir $f) BUILD_DIR=$(CURDIR);) \ fi # Create the marker file so that this rule doesn't get executed again. @if test ! -f content-checked; then \ touch content-checked; \ fi endif ################################################################################ # # Install the appropriate files on the web server. This relies on the # environment variable HANDBOOK_INSTALL_DIRECTORY being defined, and # (assuming that this variable points to a directory on the network) the # appropriate share has been mounted. # # !!! How do we get it to also install any extra files that we require # for a particular content file (e.g., the SQL code for Tutorial 3)? !!! # install-questions: $(QUESTION_INSTALL_FILES) @test -d $(HANDBOOK_INSTALL_ROOT) ifneq ($(strip $(QUESTION_INSTALL_FILES)),) cp $(QUESTION_INSTALL_FILES) $(INSTALL_DIRECTORY) endif install-answers: $(ANSWER_INSTALL_FILES) @test -d $(HANDBOOK_INSTALL_ROOT) ifneq ($(strip $(ANSWER_INSTALL_FILES)),) cp $(ANSWER_INSTALL_FILES) $(INSTALL_DIRECTORY) endif ################################################################################ # # Clean up. # clean: web-clean print-clean ifneq ($(strip $(ALL_CLEAN_FILES)),) -rm -f $(ALL_CLEAN_FILES) endif web-clean: ifneq ($(strip $(WEB_CLEAN_FILES)),) -rm -f $(WEB_CLEAN_FILES) endif print-clean: ifneq ($(strip $(PRINT_CLEAN_FILES)),) -rm -f $(PRINT_CLEAN_FILES) endif ################################################################################ # # Debugging information, mostly lists of the generated variables. # debug: @announce Externally defined variables @echo "TEACHING_SHARED = [$(TEACHING_SHARED)]" @echo "ALL_PAPERS_ROOT = [$(ALL_PAPERS_ROOT)]" @echo "HANDBOOK_INSTALL_ROOT = [$(HANDBOOK_INSTALL_ROOT)]" @echo "NOINIT = [$(NOINIT)]" @announce Internally defined variables @echo "GLOBAL_HANDBOOK_INCLUDE = [$(GLOBAL_HANDBOOK_INCLUDE)]" @echo "LOCAL_HANDBOOK_INCLUDE = [$(LOCAL_HANDBOOK_INCLUDE)]" @echo "SUBJECT_CODE = [$(SUBJECT_CODE)]" @echo "PAPER_NUMBER = [$(PAPER_NUMBER)]" @echo "PAPER_ROOT = [$(PAPER_ROOT)]" @echo "HANDBOOK_ROOT = [$(HANDBOOK_ROOT)]" @echo "SECTION = [$(SECTION)]" @echo "BASE_NAME = [$(BASE_NAME)]" @echo "SOURCE_XML = [$(SOURCE_XML)]" @echo "DERIVED_XML = [$(DERIVED_XML)]" @echo "WEB_QUESTIONS_HTML = [$(WEB_QUESTIONS_HTML)]" @echo "WEB_ANSWERS_HTML = [$(WEB_ANSWERS_HTML)]" @echo "PRINT_QUESTIONS_TEX = [$(PRINT_QUESTIONS_TEX)]" @echo "PRINT_ANSWERS_TEX = [$(PRINT_ANSWERS_TEX)]" @echo "PRINT_QUESTIONS_PDF_1UP = [$(PRINT_QUESTIONS_PDF_1UP)]" @echo "PRINT_ANSWERS_PDF_1UP = [$(PRINT_ANSWERS_PDF_1UP)]" @echo "PRINT_QUESTIONS_PDF_2UP = [$(PRINT_QUESTIONS_PDF_2UP)]" @echo "PRINT_ANSWERS_PDF_2UP = [$(PRINT_ANSWERS_PDF_2UP)]" @echo "DERIVED_WEB_FILES = [$(DERIVED_WEB_FILES)]" @echo "DERIVED_PRINT_FILES = [$(DERIVED_PRINT_FILES)]" @echo "CONTENT_SRC = [$(CONTENT_SRC)]" @echo "QUESTION_INSTALL_FILES = [$(QUESTION_INSTALL_FILES)]" @echo "ANSWER_INSTALL_FILES = [$(ANSWER_INSTALL_FILES)]" @echo "WEB_CLEAN_FILES = [$(WEB_CLEAN_FILES)]" @echo "PRINT_CLEAN_FILES = [$(PRINT_CLEAN_FILES)]" @echo "ALL_CLEAN_FILES = [$(ALL_CLEAN_FILES)]" ################################################################################ # # Print out the list of targets. Handy for when you forget! # targets: @echo $(TARGETS) ################################################################################ # # File: $Id$ # # Standard variables and rules for building a particular document within a # section of the handbook (e.g., a single tutorial). Altering these # definitions will affect ALL DOCUMENT MAKEFILES FOR ALL PAPERS!! If you # need to do something specific for a particular paper, include a custom # rule in its makefile. DON'T add it here! # ################################################################################ ################################################################################ # # Run one-time initialisation stuff, _unless_ NOINIT is defined. Any # "parent" makefile that's already done the same one-time initialisation # and calls this one should define NOINIT (the value doesn't matter) to # switch off one-time initialisation in this makefile. Thus if the # "parent" makefile calls this makefile several times, things like the # content checking will only happen once for a single invocation of the # "parent" makefile. # # When running this makefile standalone, _don't_ define NOINIT, and # everything will still work as expected. # ifndef NOINIT include $(GLOBAL_HANDBOOK_INCLUDE)/remove_content_marker_files.make endif ################################################################################ # # Include variables defining the current paper. # include $(LOCAL_HANDBOOK_INCLUDE)/paper_variables.make ################################################################################ # # We make quite a lot of reference to files in the handbook directory, # so set a variable to point to it. # HANDBOOK_ROOT:=$(PAPER_ROOT)/Handbook ################################################################################ # # Include XSLT functions. # include $(GLOBAL_HANDBOOK_INCLUDE)/xslt_functions.make ################################################################################ # # Defines which section we are currently building. This is actually the # path to the main folder for the section. Normally this is passed in as # an argument to make from a higher-level makefile (i.e., "make # SECTION=path/to/section"). # # Hmm, sh seems to convert uppercase letters in my paths to lowercase. # I'm not sure whether this will break anything or not... # # I _can_ confirm that having spaces anywhere in the parent path causes # serious breakage, because notdir returns bogus results in such cases. # All of the make functions assume whitespace delimitation, and there # doesn't seem to be any obvious way to work around this other than # eliminating spaces from the parent path (quoting the result of the # shell function below makes no difference). Fortunately, this is pretty # easy to do :) # # SECTION?=$(notdir $(shell cd ..; pwd)) ################################################################################ # # Set up the context for the current document. # # We use the same base name for both the directory and the document, which # makes life very easy :) # BASE_NAME:=$(notdir $(CURDIR)) # # SOURCE_XML is the original source XML, from which DERIVED_XML is # generated (the derived source has the includes for questions, etc., # inserted). # SOURCE_XML:=$(BASE_NAME).xml DERIVED_XML:=$(SOURCE_XML:.xml=-derived.xml) # # Define the names of the output files. # WEB_QUESTIONS_HTML:=$(BASE_NAME)-questions.html WEB_ANSWERS_HTML:=$(BASE_NAME)-answers.html PRINT_QUESTIONS_TEX:=$(WEB_QUESTIONS_HTML:.html=.tex) PRINT_ANSWERS_TEX:=$(WEB_ANSWERS_HTML:.html=.tex) PRINT_QUESTIONS_PDF_1UP:=$(PRINT_QUESTIONS_TEX:.tex=.pdf) PRINT_ANSWERS_PDF_1UP:=$(PRINT_ANSWERS_TEX:.tex=.pdf) PRINT_QUESTIONS_PDF_2UP:=$(PRINT_QUESTIONS_TEX:.tex=-2up.pdf) PRINT_ANSWERS_PDF_2UP:=$(PRINT_ANSWERS_TEX:.tex=-2up.pdf) # # Groupings of various web- and print-related files, for easy reference. # Feel free to add to these as necessary :) # DERIVED_WEB_FILES:=$(WEB_QUESTIONS_HTML) $(WEB_ANSWERS_HTML) DERIVED_PRINT_FILES:=$(PRINT_QUESTIONS_TEX) $(PRINT_ANSWERS_TEX) \ $(PRINT_QUESTIONS_PDF_1UP) $(PRINT_ANSWERS_PDF_1UP) \ $(PRINT_QUESTIONS_PDF_2UP) $(PRINT_ANSWERS_PDF_2UP) ################################################################################ # # Lists of files for cleaning up. Add to these (using +=) as necessary in # derived makefiles. # WEB_CLEAN_FILES:=$(DERIVED_WEB_FILES) .png PRINT_CLEAN_FILES:=$(DERIVED_PRINT_FILES) .pdf ALL_CLEAN_FILES:=$(DERIVED_XML) $(WEB_CLEAN_FILES) $(PRINT_CLEAN_FILES) ################################################################################ # # Extract the list of included filenames from the source template. Hooray # for the shell function and Perl! Include file paths are delimited by # <@INC[ ]@>. All paths are relative to $(PAPER_ROOT). We don't use # $(PAPER_ROOT)/$(SECTION), because some the include directories may be in # relatively arbitrary locations. # CONTENT_SRC:=$(shell perl -ne 'print "$(PAPER_ROOT)/$(notdir $(SECTION))/$$1\n" if /<\@INC\[([^]]+)\]@>/;' $(SOURCE_XML)) ################################################################################ # # List of possible targets. If you need to add to this for a specific # case, use TARGETS+=xxx in the actual makefile. # TARGETS:=all content targets debug \ web web-questions web-answers \ print print-questions print-answers \ questions answers \ clean web-clean print-clean .PHONY: $(TARGETS) ################################################################################ # # Build everything. # all: web print ################################################################################ # # Build questions or answers only. # questions: web-questions print-questions answers: web-answers print-answers ################################################################################ # # Build web version only. # web: web-questions web-answers web-questions: content $(WEB_QUESTIONS_HTML) $(WEB_QUESTIONS_HTML): $(DERIVED_XML) @announce "Building $@ from $<" $(call xslt,$<,xml2html.xsl,$(call xslt_parameter,department,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper,'$(PAPER_NUMBER)'),$(call xslt_parameter,standalone,'no'),$(call xslt_parameter,showanswers,'no'),$(call xslt_parameter,base-path,'.'),$(call xslt_parameter,image-format,'png')) > $@ web-answers: content $(WEB_ANSWERS_HTML) $(WEB_ANSWERS_HTML): $(DERIVED_XML) @announce "Building $@ from $<" $(call xslt,$<,xml2html.xsl,$(call xslt_parameter,department,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper,'$(PAPER_NUMBER)'),$(call xslt_parameter,standalone,'no'),$(call xslt_parameter,showanswers,'yes'),$(call xslt_parameter,base-path,'.'),$(call xslt_parameter,image-format,'png')) > $@ ################################################################################ # # Build print version only. We add code to the LaTeX source to mark the # first and last pages of the document, so that an individual PDF for this # document can be generated later. \markfirstpage and \marklastpage are # macros defined in handbook_template.tex that write the current physical # page number to the .aux file. # print: print-questions print-answers print-questions: content $(PRINT_QUESTIONS_TEX) $(PRINT_QUESTIONS_TEX): $(DERIVED_XML) @announce "Building $@ from $<" @echo "\\markfirstpage{$(SECTION)/$(BASE_NAME)/$(@:.tex=.pdf)}" > $@ $(call xslt,$<,xml2latex.xsl,$(call xslt_parameter,department,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper,'$(PAPER_NUMBER)'),$(call xslt_parameter,standalone,'no'),$(call xslt_parameter,showanswers,'no'),$(call xslt_parameter,base-path,'Sections/$(SECTION)/$(BASE_NAME)'),$(call xslt_parameter,image-format,'pdf')) >> $@ @echo "\\marklastpage{$(SECTION)/$(BASE_NAME)/$(@:.tex=.pdf)}" >> $@ %-questions.pdf: %-questions.tex @announce "Generating $@" @$(if $(wildcard $(HANDBOOK_ROOT)/handbook.pdf),,$(error $(HANDBOOK_ROOT)/handbook.pdf is missing)) @gs -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=$@ \ -dFirstPage=$(shell grep '$@.1up.first' $(HANDBOOK_ROOT)/handbook.aux \| cut -d= -f2) \ -dLastPage=$(shell grep '$@.1up.last' $(HANDBOOK_ROOT)/handbook.aux \| cut -d= -f2) $(HANDBOOK_ROOT)/handbook.pdf %-questions-2up.pdf: %-questions.tex @announce "Generating $@" @$(if $(wildcard $(HANDBOOK_ROOT)/handbook-2up.pdf),,$(error $(HANDBOOK_ROOT)/handbook-2up.pdf is missing)) @gs -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=$@ \ -dFirstPage=$(shell grep '$(@:-2up.pdf=.pdf).2up.first' $(HANDBOOK_ROOT)/handbook.aux \| cut -d= -f2) \ -dLastPage=$(shell grep '$(@:-2up.pdf=.pdf).2up.last' $(HANDBOOK_ROOT)/handbook.aux \| cut -d= -f2) $(HANDBOOK_ROOT)/handbook-2up.pdf print-answers: content $(PRINT_ANSWERS_TEX) $(PRINT_ANSWERS_TEX): $(DERIVED_XML) @announce "Building $@ from $<" @echo "\\markfirstpage{$(SECTION)/$(BASE_NAME)/$(@:.tex=.pdf)}" > $@ $(call xslt,$<,xml2latex.xsl,$(call xslt_parameter,department,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper,'$(PAPER_NUMBER)'),$(call xslt_parameter,standalone,'no'),$(call xslt_parameter,showanswers,'yes'),$(call xslt_parameter,base-path,'Sections/$(SECTION)/$(BASE_NAME)'),$(call xslt_parameter,image-format,'pdf')) >> $@ @echo "\\marklastpage{$(SECTION)/$(BASE_NAME)/$(@:.tex=.pdf)}" >> $@ %-answers.pdf: %-answers.tex @announce "Generating $@" @$(if $(wildcard $(HANDBOOK_ROOT)/handbook-answers.pdf),,$(error $(HANDBOOK_ROOT)/handbook-answers.pdf is missing)) @gs -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=$@ \ -dFirstPage=$(shell grep '$@.1up.first' $(HANDBOOK_ROOT)/handbook-answers.aux \| cut -d= -f2) \ -dLastPage=$(shell grep '$@.1up.last' $(HANDBOOK_ROOT)/handbook-answers.aux \| cut -d= -f2) $(HANDBOOK_ROOT)/handbook-answers.pdf %-answers-2up.pdf: %-answers.tex @announce "Generating $@" @$(if $(wildcard $(HANDBOOK_ROOT)/handbook-answers-2up.pdf),,$(error $(HANDBOOK_ROOT)/handbook-answers-2up.pdf is missing)) @gs -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=$@ \ -dFirstPage=$(shell grep '$(@:-2up.pdf=.pdf).2up.first' $(HANDBOOK_ROOT)/handbook-answers.aux \| cut -d= -f2) \ -dLastPage=$(shell grep '$(@:-2up.pdf=.pdf).2up.last' $(HANDBOOK_ROOT)/handbook-answers.aux \| cut -d= -f2) $(HANDBOOK_ROOT)/handbook-answers-2up.pdf ################################################################################ # # Generate the derived XML source from the original XML template. The Big # Ugly Regexp matches any file include directive (<@INC[ ]@>) and the # script then simply inserts the content of that file into the output # stream. This saves us having to fool around with XML document includes, # which basically just don't work for us because they expect the included # document to be a valid XML document. We really just want to include XML # fragments. XInclude 1.0 supports this, but it's only just been finalised # at the time of writing (January 2005). # $(DERIVED_XML): $(SOURCE_XML) @announce "Generating $@" @perl -ne 'if (/^(.)<\@INC\[([^]]+)\]@>(.*)$$/) { print "$$1\n" . `cat $(PAPER_ROOT)/$(SECTION)/$$2` . "\n$$3\n"; } else { print; }' $< > $@ ################################################################################ # # If any of the content files change, touch the XML template to # ensure that the document gets fully rebuilt. # $(SOURCE_XML): $(CONTENT_SRC) @touch $@ ################################################################################ # # Build the individual content files, etc., as necessary. Note above that # all the primary targets depend on the "content" target, _before_ # anything else. This ensures that the content gets rebuilt (if necessary) # before anything else happens. # # This may seem redundant, given that SOURCE_XML depends on CONTENT_SRC in # the rule above. However, this rule only works if we change one of the # actual content files. What if instead, we change a graphic associated # with one of the content files, without changing the content file itself? # In this case, make assumes that nothing needs to be done, because the # content file is older than the target, and this makefile knows nothing # about any dependencies that the content file might have (that's dealt # with by the makefile in the appropriate content directory). This is the # main downside of having independent makefiles. # # So, the slightly convoluted workaround using the empty "content" target # ensures that the content files will always be checked, regardless of # whether they've changed. If any of their prerequisites for a particular # content file change, then the content file itself will be touched, thus # activating the SOURCE_XML rule above. This process is particularly # important to ensure that associated graphics get rebuilt when they # change. # # All that aside, however, the _real_ trick is to ensure that this rule is # only executed once. If we do a "make", this rule would nominally get # executed four times (once for each of the targets that depend on # "content"). The first time through the rule, therefore, we create a # marker file called "content-checked". If this file exists, the rule # isn't executed. These marker files are cleaned up by a one-off find # command when the makefile is first run (see the include file # one-time-init.make). # # Note: using the wildcard function to test for the existence of the # marker file doesn't work when the makefile is run standalone, because # the function result is expanded at the time the makefile is _loaded_, # _before_ the one-time initialisation has a change to kick in and delete # the file. This has the rather bizarre side-effect of the makefile only # re-checking the content on every second run, and means that we can't use # make conditionals to control rule execution. The solution is to prefix # every command in the rule with "test ! -f" to check whether the marker # file exists. # # Ack! The tribulations of not using a monolithic makefile... # content: # Of course, there's little point in doing anything if there's no content! ifneq (,$(strip $(CONTENT_SRC))) @if test ! -f content-checked; then \ announce "Checking content for $(BASE_NAME)"; \ fi # Sanity check: do the content files referenced from the original source # actually exist? The "cat</dev/null" is included because there needs to # be something in the body of the if --- you can't just leave it empty. We # can use the wildcard function here because these files should already # exist --- if they don't, then by definition the filename is wrong! @if test ! -f content-checked; then \ $(foreach f,$(CONTENT_SRC),$(if $(wildcard $f),,$(error Content file $f referenced from $(SOURCE_XML) does not exist)) cat</dev/null;) \ fi # Remake each individual content file. @if test ! -f content-checked; then \ $(foreach f,$(CONTENT_SRC),$(MAKE) -C $(dir $f) $(notdir $f) BUILD_DIR=$(CURDIR);) \ fi # Create the marker file so that this rule doesn't get executed again. @if test ! -f content-checked; then \ touch content-checked; \ fi endif ################################################################################ # # Clean up. # clean: web-clean print-clean -rm -f $(ALL_CLEAN_FILES) web-clean: -rm -f $(WEB_CLEAN_FILES) print-clean: -rm -f $(PRINT_CLEAN_FILES) ################################################################################ # # Debugging information, mostly lists of the generated variables. # debug: @echo "NOINIT = [$(NOINIT)]" @echo "GLOBAL_HANDBOOK_INCLUDE = [$(GLOBAL_HANDBOOK_INCLUDE)]" @echo "LOCAL_HANDBOOK_INCLUDE = [$(LOCAL_HANDBOOK_INCLUDE)]" @echo "SUBJECT_CODE = [$(SUBJECT_CODE)]" @echo "PAPER_NUMBER = [$(PAPER_NUMBER)]" @echo "PAPER_ROOT = [$(PAPER_ROOT)]" @echo "HANDBOOK_ROOT = [$(HANDBOOK_ROOT)]" @echo "SECTION = [$(SECTION)]" @echo "BASE_NAME = [$(BASE_NAME)]" @echo "SOURCE_XML = [$(SOURCE_XML)]" @echo "DERIVED_XML = [$(DERIVED_XML)]" @echo "WEB_QUESTIONS_HTML = [$(WEB_QUESTIONS_HTML)]" @echo "WEB_ANSWERS_HTML = [$(WEB_ANSWERS_HTML)]" @echo "PRINT_QUESTIONS_TEX = [$(PRINT_QUESTIONS_TEX)]" @echo "PRINT_ANSWERS_TEX = [$(PRINT_ANSWERS_TEX)]" @echo "PRINT_QUESTIONS_PDF_1UP = [$(PRINT_QUESTIONS_PDF_1UP)]" @echo "PRINT_ANSWERS_PDF_1UP = [$(PRINT_ANSWERS_PDF_1UP)]" @echo "PRINT_QUESTIONS_PDF_2UP = [$(PRINT_QUESTIONS_PDF_2UP)]" @echo "PRINT_ANSWERS_PDF_2UP = [$(PRINT_ANSWERS_PDF_2UP)]" @echo "DERIVED_WEB_FILES = [$(DERIVED_WEB_FILES)]" @echo "DERIVED_PRINT_FILES = [$(DERIVED_PRINT_FILES)]" @echo "CONTENT_SRC = [$(CONTENT_SRC)]" @echo "WEB_CLEAN_FILES = [$(WEB_CLEAN_FILES)]" @echo "PRINT_CLEAN_FILES = [$(PRINT_CLEAN_FILES)]" @echo "ALL_CLEAN_FILES = [$(ALL_CLEAN_FILES)]" ################################################################################ # # Print out the list of targets. Handy for when you forget! # targets: @echo $(TARGETS)

Ignore Space Show notes View

make-includes/build_document_rules.make

################################################################################
#
# File: $Id$
#
# Standard variables and rules for building a particular document within a
# section of the handbook (e.g., a single tutorial). Altering these
# definitions will affect ALL DOCUMENT MAKEFILES FOR ALL PAPERS!! If you
# need to do something specific for a particular paper, include a custom
# rule in its makefile. DON'T add it here!
#
################################################################################

################################################################################
#
# Run one-time initialisation stuff, _unless_ NOINIT is defined. Any
# "parent" makefile that's already done the same one-time initialisation
# and calls this one should define NOINIT (the value doesn't matter) to
# switch off one-time initialisation in this makefile. Thus if the
# "parent" makefile calls this makefile several times, things like the
# content checking will only happen once for a single invocation of the
# "parent" makefile.
# 
# When running this makefile standalone, _don't_ define NOINIT, and
# everything will still work as expected.
#
ifndef NOINIT
include $(GLOBAL_HANDBOOK_INCLUDE)/remove_content_marker_files.make
endif

################################################################################
#
# Include variables defining the current paper.
#
include $(LOCAL_HANDBOOK_INCLUDE)/paper_variables.make

################################################################################
#
# We make quite a lot of reference to files in the handbook directory,
# so set a variable to point to it. PAPER_ROOT is defined in the include
# file paper_variables.make.
#
HANDBOOK_ROOT:=$(PAPER_ROOT)/Handbook

################################################################################
#
# Include XSLT functions.
#
include $(GLOBAL_HANDBOOK_INCLUDE)/xslt_functions.make

################################################################################
#
# Defines which section we are currently building. This is actually the
# path to the main folder for the section. Normally this is passed in as
# an argument to make from a higher-level makefile (i.e., "make
# SECTION=path/to/section").
#
# Hmm, sh seems to convert uppercase letters in my paths to lowercase.
# I'm not sure whether this will break anything or not...
#
# I _can_ confirm that having spaces anywhere in the parent path causes
# serious breakage, because notdir returns bogus results in such cases.
# All of the make functions assume whitespace delimitation, and there
# doesn't seem to be any obvious way to work around this other than
# eliminating spaces from the parent path (quoting the result of the
# shell function below makes no difference). Fortunately, this is pretty
# easy to do :)
#
#
SECTION?=$(notdir $(shell cd ..; pwd))

################################################################################
#
# Set up the context for the current document.
#
# We use the same base name for both the directory and the document, which
# makes life very easy :)
#
BASE_NAME:=$(notdir $(CURDIR))

#
# SOURCE_XML is the original source XML, from which DERIVED_XML is
# generated (the derived source has the includes for questions, etc.,
# inserted).
#
SOURCE_XML:=$(BASE_NAME).xml
DERIVED_XML:=$(SOURCE_XML:.xml=-derived.xml)

#
# Define the names of the output files.
#
WEB_QUESTIONS_HTML:=$(BASE_NAME)-questions.html
WEB_ANSWERS_HTML:=$(BASE_NAME)-answers.html

PRINT_QUESTIONS_TEX:=$(WEB_QUESTIONS_HTML:.html=.tex)
PRINT_ANSWERS_TEX:=$(WEB_ANSWERS_HTML:.html=.tex)

PRINT_QUESTIONS_PDF_1UP:=$(PRINT_QUESTIONS_TEX:.tex=.pdf)
PRINT_ANSWERS_PDF_1UP:=$(PRINT_ANSWERS_TEX:.tex=.pdf)
PRINT_QUESTIONS_PDF_2UP:=$(PRINT_QUESTIONS_TEX:.tex=-2up.pdf)
PRINT_ANSWERS_PDF_2UP:=$(PRINT_ANSWERS_TEX:.tex=-2up.pdf)

#
# Groupings of various web- and print-related files, for easy reference.
# Feel free to add to these as necessary :)
#
DERIVED_WEB_FILES:=$(WEB_QUESTIONS_HTML) $(WEB_ANSWERS_HTML)
DERIVED_PRINT_FILES:=$(PRINT_QUESTIONS_TEX) $(PRINT_ANSWERS_TEX) \
	$(PRINT_QUESTIONS_PDF_1UP) $(PRINT_ANSWERS_PDF_1UP) \
	$(PRINT_QUESTIONS_PDF_2UP) $(PRINT_ANSWERS_PDF_2UP)

################################################################################
#
# Extract the list of included filenames from the source template. Hooray
# for the shell function and Perl! Include file paths are delimited by
# <@INC[ ]@>. All paths are relative to $(PAPER_ROOT). We don't use
# $(PAPER_ROOT)/$(SECTION), because some of the include directories may be
# in relatively arbitrary locations.
#
CONTENT_SRC:=$(shell perl -ne 'print "$(PAPER_ROOT)/$(notdir $(SECTION))/$$1\n" if /<\@INC\[([^]]+)\]@>/;' $(SOURCE_XML))

################################################################################
#
# Directory to install files into on web server.
#
INSTALL_DIRECTORY:=$(HANDBOOK_INSTALL_ROOT)/$(SUBJECT_CODE)$(PAPER_NUMBER)/www/$(SECTION)/$(BASE_NAME)

################################################################################
#
# Files to be installed on web server.
#
QUESTION_INSTALL_FILES:=$(WEB_QUESTIONS_HTML) $(PRINT_QUESTIONS_PDF_1UP) \
	$(PRINT_QUESTIONS_PDF_2UP) $(wildcard *.png)

ANSWER_INSTALL_FILES:=$(WEB_ANSWERS_HTML) $(PRINT_ANSWERS_PDF_1UP) \
	$(PRINT_ANSWERS_PDF_2UP)

################################################################################
#
# Lists of files for cleaning up. Add to these (using +=) as necessary in
# derived makefiles.
#
WEB_CLEAN_FILES:=$(DERIVED_WEB_FILES) *.png
PRINT_CLEAN_FILES:=$(DERIVED_PRINT_FILES) *.pdf
ALL_CLEAN_FILES:=$(DERIVED_XML) $(WEB_CLEAN_FILES) $(PRINT_CLEAN_FILES)

################################################################################
#
# List of possible targets. If you need to add to this for a specific
# case, use TARGETS+=xxx in the actual makefile.
#
TARGETS:=all content targets debug install-questions install-answers \
	web web-questions web-answers \
	print print-questions print-answers \
	questions answers \
	clean web-clean print-clean

.PHONY: $(TARGETS)

################################################################################
#
# Build everything.
#
all: web print

################################################################################
#
# Build questions or answers only.
#
questions: web-questions print-questions

answers: web-answers print-answers

################################################################################
#
# Build web version only.
#
web: web-questions web-answers

web-questions: content $(WEB_QUESTIONS_HTML)

$(WEB_QUESTIONS_HTML): $(DERIVED_XML)
	@announce "Building $@ from $<"
	$(call xslt,$<,xml2html.xsl,$(call xslt_parameter,department,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper,'$(PAPER_NUMBER)'),$(call xslt_parameter,standalone,'no'),$(call xslt_parameter,showanswers,'no'),$(call xslt_parameter,base-path,'.'),$(call xslt_parameter,image-format,'png')) > $@

web-answers: content $(WEB_ANSWERS_HTML)

$(WEB_ANSWERS_HTML): $(DERIVED_XML)
	@announce "Building $@ from $<"
	$(call xslt,$<,xml2html.xsl,$(call xslt_parameter,department,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper,'$(PAPER_NUMBER)'),$(call xslt_parameter,standalone,'no'),$(call xslt_parameter,showanswers,'yes'),$(call xslt_parameter,base-path,'.'),$(call xslt_parameter,image-format,'png')) > $@

################################################################################
#
# Build print version only. We add code to the LaTeX source to mark the
# first and last pages of the document, so that an individual PDF for this
# document can be generated later. \markfirstpage and \marklastpage are
# macros defined in handbook_template.tex that write the current physical
# page number to the .aux file.
#
print: print-questions print-answers

print-questions: content $(PRINT_QUESTIONS_TEX)

$(PRINT_QUESTIONS_TEX): $(DERIVED_XML)
	@announce "Building $@ from $<"
	@echo "\\markfirstpage{$(SECTION)/$(BASE_NAME)/$(@:.tex=.pdf)}" > $@
	$(call xslt,$<,xml2latex.xsl,$(call xslt_parameter,department,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper,'$(PAPER_NUMBER)'),$(call xslt_parameter,standalone,'no'),$(call xslt_parameter,showanswers,'no'),$(call xslt_parameter,base-path,'Sections/$(SECTION)/$(BASE_NAME)'),$(call xslt_parameter,image-format,'pdf')) >> $@
	@echo "\\marklastpage{$(SECTION)/$(BASE_NAME)/$(@:.tex=.pdf)}" >> $@

%-questions.pdf: %-questions.tex
	@announce "Generating $@"
	@$(if $(wildcard $(HANDBOOK_ROOT)/handbook.pdf),,$(error $(HANDBOOK_ROOT)/handbook.pdf is missing))
	@gs -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=$@ \
		-dFirstPage=$(shell grep '$@.1up.first' $(HANDBOOK_ROOT)/handbook.aux | cut -d= -f2) \
		-dLastPage=$(shell grep '$@.1up.last' $(HANDBOOK_ROOT)/handbook.aux | cut -d= -f2) $(HANDBOOK_ROOT)/handbook.pdf

%-questions-2up.pdf: %-questions.tex
	@announce "Generating $@"
	@$(if $(wildcard $(HANDBOOK_ROOT)/handbook-2up.pdf),,$(error $(HANDBOOK_ROOT)/handbook-2up.pdf is missing))
	@gs -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=$@ \
		-dFirstPage=$(shell grep '$(@:-2up.pdf=.pdf).2up.first' $(HANDBOOK_ROOT)/handbook.aux | cut -d= -f2) \
		-dLastPage=$(shell grep '$(@:-2up.pdf=.pdf).2up.last' $(HANDBOOK_ROOT)/handbook.aux | cut -d= -f2) $(HANDBOOK_ROOT)/handbook-2up.pdf

print-answers: content $(PRINT_ANSWERS_TEX)

$(PRINT_ANSWERS_TEX): $(DERIVED_XML)
	@announce "Building $@ from $<"
	@echo "\\markfirstpage{$(SECTION)/$(BASE_NAME)/$(@:.tex=.pdf)}" > $@
	$(call xslt,$<,xml2latex.xsl,$(call xslt_parameter,department,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper,'$(PAPER_NUMBER)'),$(call xslt_parameter,standalone,'no'),$(call xslt_parameter,showanswers,'yes'),$(call xslt_parameter,base-path,'Sections/$(SECTION)/$(BASE_NAME)'),$(call xslt_parameter,image-format,'pdf')) >> $@
	@echo "\\marklastpage{$(SECTION)/$(BASE_NAME)/$(@:.tex=.pdf)}" >> $@

%-answers.pdf: %-answers.tex
	@announce "Generating $@"
	@$(if $(wildcard $(HANDBOOK_ROOT)/handbook-answers.pdf),,$(error $(HANDBOOK_ROOT)/handbook-answers.pdf is missing))
	@gs -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=$@ \
		-dFirstPage=$(shell grep '$@.1up.first' $(HANDBOOK_ROOT)/handbook-answers.aux | cut -d= -f2) \
		-dLastPage=$(shell grep '$@.1up.last' $(HANDBOOK_ROOT)/handbook-answers.aux | cut -d= -f2) $(HANDBOOK_ROOT)/handbook-answers.pdf

%-answers-2up.pdf: %-answers.tex
	@announce "Generating $@"
	@$(if $(wildcard $(HANDBOOK_ROOT)/handbook-answers-2up.pdf),,$(error $(HANDBOOK_ROOT)/handbook-answers-2up.pdf is missing))
	@gs -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=$@ \
		-dFirstPage=$(shell grep '$(@:-2up.pdf=.pdf).2up.first' $(HANDBOOK_ROOT)/handbook-answers.aux | cut -d= -f2) \
		-dLastPage=$(shell grep '$(@:-2up.pdf=.pdf).2up.last' $(HANDBOOK_ROOT)/handbook-answers.aux | cut -d= -f2) $(HANDBOOK_ROOT)/handbook-answers-2up.pdf

################################################################################
#
# Generate the derived XML source from the original XML template. The Big
# Ugly Regexp matches any file include directive (<@INC[ ]@>) and the
# script then simply inserts the content of that file into the output
# stream. This saves us having to fool around with XML document includes,
# which basically just don't work for us because they expect the included
# document to be a valid XML document. We really just want to include XML
# fragments. XInclude 1.0 supports this, but it's only just been finalised
# at the time of writing (January 2005).
#
$(DERIVED_XML): $(SOURCE_XML)
	@announce "Generating $@"
	@perl -ne 'if (/^(.*)<\@INC\[([^]]+)\]@>(.*)$$/) { print "$$1\n" . `cat $(PAPER_ROOT)/$(SECTION)/$$2` . "\n$$3\n"; } else { print; }'  $< > $@

################################################################################
#
# If any of the content files change, touch the XML template to
# ensure that the document gets fully rebuilt.
#
$(SOURCE_XML): $(CONTENT_SRC)
	@touch $@

################################################################################
#
# Build the individual content files, etc., as necessary. Note above that
# all the primary targets depend on the "content" target, _before_
# anything else. This ensures that the content gets rebuilt (if necessary)
# before anything else happens.
# 
# This may seem redundant, given that SOURCE_XML depends on CONTENT_SRC in
# the rule above. However, this rule only works if we change one of the
# actual content files. What if instead, we change a graphic associated
# with one of the content files, without changing the content file itself?
# In this case, make assumes that nothing needs to be done, because the
# content file is older than the target, and this makefile knows nothing
# about any dependencies that the content file might have (that's dealt
# with by the makefile in the appropriate content directory). This is the
# main downside of having independent makefiles.
# 
# So, the slightly convoluted workaround using the empty "content" target
# ensures that the content files will always be checked, regardless of
# whether they've changed. If any of their prerequisites for a particular
# content file change, then the content file itself will be touched, thus
# activating the SOURCE_XML rule above. This process is particularly
# important to ensure that associated graphics get rebuilt when they
# change.
#
# All that aside, however, the _real_ trick is to ensure that this rule is
# only executed once. If we do a "make", this rule would nominally get
# executed four times (once for each of the targets that depend on
# "content"). The first time through the rule, therefore, we create a
# marker file called "content-checked". If this file exists, the rule
# isn't executed. These marker files are cleaned up by a one-off find
# command when the makefile is first run (see the include file
# one-time-init.make).
#
# Note: using the wildcard function to test for the existence of the
# marker file doesn't work when the makefile is run standalone, because
# the function result is expanded at the time the makefile is _loaded_,
# _before_ the one-time initialisation has a change to kick in and delete
# the file. This has the rather bizarre side-effect of the makefile only
# re-checking the content on every second run, and means that we can't use
# make conditionals to control rule execution. The solution is to prefix
# every command in the rule with "test ! -f" to check whether the marker
# file exists.
#
# Ack! The tribulations of not using a monolithic makefile...
#
content:
# Of course, there's little point in doing anything if there's no content!
ifneq ($(strip $(CONTENT_SRC)),)
	@if test ! -f content-checked; then \
		announce "Checking content for $(BASE_NAME)"; \
	fi
# Sanity check: do the content files referenced from the original source
# actually exist? The "cat</dev/null" is included because there needs to
# be something in the body of the if --- you can't just leave it empty. We
# can use the wildcard function here because these files should already
# exist --- if they don't, then by definition the filename is wrong!
	@if test ! -f content-checked; then \
		$(foreach f,$(CONTENT_SRC),$(if $(wildcard $f),,$(error Content file $f referenced from $(SOURCE_XML) does not exist)) cat</dev/null;) \
	fi
# Remake each individual content file.
	@if test ! -f content-checked; then \
		$(foreach f,$(CONTENT_SRC),$(MAKE) -C $(dir $f) $(notdir $f) BUILD_DIR=$(CURDIR);) \
	fi
# Create the marker file so that this rule doesn't get executed again.
	@if test ! -f content-checked; then \
		touch content-checked; \
	fi
endif

################################################################################
#
# Install the appropriate files on the web server. This relies on the
# environment variable HANDBOOK_INSTALL_DIRECTORY being defined, and
# (assuming that this variable points to a directory on the network) the
# appropriate share has been mounted.
#
# !!! How do we get it to also install any extra files that we require
# for a particular content file (e.g., the SQL code for Tutorial 3)? !!!
#
install-questions: $(QUESTION_INSTALL_FILES)
	@test -d $(HANDBOOK_INSTALL_ROOT)
ifneq ($(strip $(QUESTION_INSTALL_FILES)),)
	cp $(QUESTION_INSTALL_FILES) $(INSTALL_DIRECTORY)
endif

install-answers: $(ANSWER_INSTALL_FILES)
	@test -d $(HANDBOOK_INSTALL_ROOT)
ifneq ($(strip $(ANSWER_INSTALL_FILES)),)
	cp $(ANSWER_INSTALL_FILES) $(INSTALL_DIRECTORY)
endif

################################################################################
#
# Clean up.
#
clean: web-clean print-clean
ifneq ($(strip $(ALL_CLEAN_FILES)),)
	-rm -f $(ALL_CLEAN_FILES)
endif

web-clean:
ifneq ($(strip $(WEB_CLEAN_FILES)),)
	-rm -f $(WEB_CLEAN_FILES)
endif

print-clean:
ifneq ($(strip $(PRINT_CLEAN_FILES)),)
	-rm -f $(PRINT_CLEAN_FILES)
endif

################################################################################
#
# Debugging information, mostly lists of the generated variables.
#
debug:
	@announce Externally defined variables
	@echo "TEACHING_SHARED = [$(TEACHING_SHARED)]"
	@echo "ALL_PAPERS_ROOT = [$(ALL_PAPERS_ROOT)]"
	@echo "HANDBOOK_INSTALL_ROOT = [$(HANDBOOK_INSTALL_ROOT)]"
	@echo "NOINIT = [$(NOINIT)]"
	@announce Internally defined variables
	@echo "GLOBAL_HANDBOOK_INCLUDE = [$(GLOBAL_HANDBOOK_INCLUDE)]"
	@echo "LOCAL_HANDBOOK_INCLUDE = [$(LOCAL_HANDBOOK_INCLUDE)]"
	@echo "SUBJECT_CODE = [$(SUBJECT_CODE)]"
	@echo "PAPER_NUMBER = [$(PAPER_NUMBER)]"
	@echo "PAPER_ROOT = [$(PAPER_ROOT)]"
	@echo "HANDBOOK_ROOT = [$(HANDBOOK_ROOT)]"
	@echo "SECTION = [$(SECTION)]"
	@echo "BASE_NAME = [$(BASE_NAME)]"
	@echo "SOURCE_XML = [$(SOURCE_XML)]"
	@echo "DERIVED_XML = [$(DERIVED_XML)]"
	@echo "WEB_QUESTIONS_HTML = [$(WEB_QUESTIONS_HTML)]"
	@echo "WEB_ANSWERS_HTML = [$(WEB_ANSWERS_HTML)]"
	@echo "PRINT_QUESTIONS_TEX = [$(PRINT_QUESTIONS_TEX)]"
	@echo "PRINT_ANSWERS_TEX = [$(PRINT_ANSWERS_TEX)]"
	@echo "PRINT_QUESTIONS_PDF_1UP = [$(PRINT_QUESTIONS_PDF_1UP)]"
	@echo "PRINT_ANSWERS_PDF_1UP = [$(PRINT_ANSWERS_PDF_1UP)]"
	@echo "PRINT_QUESTIONS_PDF_2UP = [$(PRINT_QUESTIONS_PDF_2UP)]"
	@echo "PRINT_ANSWERS_PDF_2UP = [$(PRINT_ANSWERS_PDF_2UP)]"
	@echo "DERIVED_WEB_FILES = [$(DERIVED_WEB_FILES)]"
	@echo "DERIVED_PRINT_FILES = [$(DERIVED_PRINT_FILES)]"
	@echo "CONTENT_SRC = [$(CONTENT_SRC)]"
	@echo "QUESTION_INSTALL_FILES = [$(QUESTION_INSTALL_FILES)]"
	@echo "ANSWER_INSTALL_FILES = [$(ANSWER_INSTALL_FILES)]"
	@echo "WEB_CLEAN_FILES = [$(WEB_CLEAN_FILES)]"
	@echo "PRINT_CLEAN_FILES = [$(PRINT_CLEAN_FILES)]"
	@echo "ALL_CLEAN_FILES = [$(ALL_CLEAN_FILES)]"

################################################################################
#
# Print out the list of targets. Handy for when you forget!
#
targets:
	@echo $(TARGETS)

################################################################################
#
# Include variables defining the current paper.
#
include $(LOCAL_HANDBOOK_INCLUDE)/paper_variables.make

################################################################################
#
# Include XSLT functions.
#
include $(GLOBAL_HANDBOOK_INCLUDE)/xslt_functions.make

#
# Define the names of the output files.
#
WEB_QUESTIONS_HTML:=$(BASE_NAME)-questions.html
WEB_ANSWERS_HTML:=$(BASE_NAME)-answers.html

PRINT_QUESTIONS_TEX:=$(WEB_QUESTIONS_HTML:.html=.tex)
PRINT_ANSWERS_TEX:=$(WEB_ANSWERS_HTML:.html=.tex)

################################################################################
#
# Extract the list of included filenames from the source template. Hooray
# for the shell function and Perl! Include file paths are delimited by
# <@INC[ ]@>. All paths are relative to $(PAPER_ROOT). We don't use
# $(PAPER_ROOT)/$(SECTION), because some the include directories may be in
# relatively arbitrary locations.
#
CONTENT_SRC:=$(shell perl -ne 'print "$(PAPER_ROOT)/$(notdir $(SECTION))/$$1\n" if /<\@INC\[([^]]+)\]@>/;' $(SOURCE_XML))

################################################################################
#
# List of possible targets. If you need to add to this for a specific
# case, use TARGETS+=xxx in the actual makefile.
#
TARGETS:=all content targets debug \
	web web-questions web-answers \
	print print-questions print-answers \
	questions answers \
	clean web-clean print-clean

.PHONY: $(TARGETS)

################################################################################
#
# Build everything.
#
all: web print

################################################################################
#
# Build questions or answers only.
#
questions: web-questions print-questions

answers: web-answers print-answers

################################################################################
#
# Build web version only.
#
web: web-questions web-answers

web-questions: content $(WEB_QUESTIONS_HTML)

web-answers: content $(WEB_ANSWERS_HTML)

print-questions: content $(PRINT_QUESTIONS_TEX)

print-answers: content $(PRINT_ANSWERS_TEX)

################################################################################
#
# Build the individual content files, etc., as necessary. Note above that
# all the primary targets depend on the "content" target, _before_
# anything else. This ensures that the content gets rebuilt (if necessary)
# before anything else happens.
# 
# This may seem redundant, given that SOURCE_XML depends on CONTENT_SRC in
# the rule above. However, this rule only works if we change one of the
# actual content files. What if instead, we change a graphic associated
# with one of the content files, without changing the content file itself?
# In this case, make assumes that nothing needs to be done, because the
# content file is older than the target, and this makefile knows nothing
# about any dependencies that the content file might have (that's dealt
# with by the makefile in the appropriate content directory). This is the
# main downside of having independent makefiles.
# 
# So, the slightly convoluted workaround using the empty "content" target
# ensures that the content files will always be checked, regardless of
# whether they've changed. If any of their prerequisites for a particular
# content file change, then the content file itself will be touched, thus
# activating the SOURCE_XML rule above. This process is particularly
# important to ensure that associated graphics get rebuilt when they
# change.
#
# All that aside, however, the _real_ trick is to ensure that this rule is
# only executed once. If we do a "make", this rule would nominally get
# executed four times (once for each of the targets that depend on
# "content"). The first time through the rule, therefore, we create a
# marker file called "content-checked". If this file exists, the rule
# isn't executed. These marker files are cleaned up by a one-off find
# command when the makefile is first run (see the include file
# one-time-init.make).
#
# Note: using the wildcard function to test for the existence of the
# marker file doesn't work when the makefile is run standalone, because
# the function result is expanded at the time the makefile is _loaded_,
# _before_ the one-time initialisation has a change to kick in and delete
# the file. This has the rather bizarre side-effect of the makefile only
# re-checking the content on every second run, and means that we can't use
# make conditionals to control rule execution. The solution is to prefix
# every command in the rule with "test ! -f" to check whether the marker
# file exists.
#
# Ack! The tribulations of not using a monolithic makefile...
#
content:
# Of course, there's little point in doing anything if there's no content!
ifneq (,$(strip $(CONTENT_SRC)))
	@if test ! -f content-checked; then \
		announce "Checking content for $(BASE_NAME)"; \
	fi
# Sanity check: do the content files referenced from the original source
# actually exist? The "cat</dev/null" is included because there needs to
# be something in the body of the if --- you can't just leave it empty. We
# can use the wildcard function here because these files should already
# exist --- if they don't, then by definition the filename is wrong!
	@if test ! -f content-checked; then \
		$(foreach f,$(CONTENT_SRC),$(if $(wildcard $f),,$(error Content file $f referenced from $(SOURCE_XML) does not exist)) cat</dev/null;) \
	fi
# Remake each individual content file.
	@if test ! -f content-checked; then \
		$(foreach f,$(CONTENT_SRC),$(MAKE) -C $(dir $f) $(notdir $f) BUILD_DIR=$(CURDIR);) \
	fi
# Create the marker file so that this rule doesn't get executed again.
	@if test ! -f content-checked; then \
		touch content-checked; \
	fi
endif

################################################################################
#
# Clean up.
#
clean: web-clean print-clean
	-rm -f $(ALL_CLEAN_FILES)

web-clean:
	-rm -f $(WEB_CLEAN_FILES)

print-clean:
	-rm -f $(PRINT_CLEAN_FILES)

################################################################################
#
# Debugging information, mostly lists of the generated variables.
#
debug:
	@echo "NOINIT = [$(NOINIT)]"
	@echo "GLOBAL_HANDBOOK_INCLUDE = [$(GLOBAL_HANDBOOK_INCLUDE)]"
	@echo "LOCAL_HANDBOOK_INCLUDE = [$(LOCAL_HANDBOOK_INCLUDE)]"
	@echo "SUBJECT_CODE = [$(SUBJECT_CODE)]"
	@echo "PAPER_NUMBER = [$(PAPER_NUMBER)]"
	@echo "PAPER_ROOT = [$(PAPER_ROOT)]"
	@echo "HANDBOOK_ROOT = [$(HANDBOOK_ROOT)]"
	@echo "SECTION = [$(SECTION)]"
	@echo "BASE_NAME = [$(BASE_NAME)]"
	@echo "SOURCE_XML = [$(SOURCE_XML)]"
	@echo "DERIVED_XML = [$(DERIVED_XML)]"
	@echo "WEB_QUESTIONS_HTML = [$(WEB_QUESTIONS_HTML)]"
	@echo "WEB_ANSWERS_HTML = [$(WEB_ANSWERS_HTML)]"
	@echo "PRINT_QUESTIONS_TEX = [$(PRINT_QUESTIONS_TEX)]"
	@echo "PRINT_ANSWERS_TEX = [$(PRINT_ANSWERS_TEX)]"
	@echo "PRINT_QUESTIONS_PDF_1UP = [$(PRINT_QUESTIONS_PDF_1UP)]"
	@echo "PRINT_ANSWERS_PDF_1UP = [$(PRINT_ANSWERS_PDF_1UP)]"
	@echo "PRINT_QUESTIONS_PDF_2UP = [$(PRINT_QUESTIONS_PDF_2UP)]"
	@echo "PRINT_ANSWERS_PDF_2UP = [$(PRINT_ANSWERS_PDF_2UP)]"
	@echo "DERIVED_WEB_FILES = [$(DERIVED_WEB_FILES)]"
	@echo "DERIVED_PRINT_FILES = [$(DERIVED_PRINT_FILES)]"
	@echo "CONTENT_SRC = [$(CONTENT_SRC)]"
	@echo "WEB_CLEAN_FILES = [$(WEB_CLEAN_FILES)]"
	@echo "PRINT_CLEAN_FILES = [$(PRINT_CLEAN_FILES)]"
	@echo "ALL_CLEAN_FILES = [$(ALL_CLEAN_FILES)]"

################################################################################
#
# Print out the list of targets. Handy for when you forget!
#
targets:
	@echo $(TARGETS)

Ignore Space Show notes View make-includes/build_section_rules.make
################################################################################ # # File: $Id$ # # Standard variables and rules for building a particular section of the # handbook. Altering these definitions will affect ALL SECTION MAKEFILES # FOR ALL PAPERS!! If you need to do something specific for a particular # paper, include a custom rule in its makefile. DON'T add it here! # ################################################################################ ################################################################################ # # Run one-time initialisation stuff, _unless_ NOINIT is defined. Any # "parent" makefile that's already done the same one-time initialisation # and calls this one should define NOINIT (the value doesn't matter) to # switch off one-time initialisation in this makefile. Thus if the # "parent" makefile calls this makefile several times, things like the # content checking will only happen once for a single invocation of the # "parent" makefile. # # When running this makefile standalone, _don't_ define NOINIT, and # everything will still work as expected. # ifndef NOINIT include $(GLOBAL_HANDBOOK_INCLUDE)/remove_content_marker_files.make endif # Now that the one-time initialsation is out of the way, ensure that # NOINIT (the value doesn't matter) is exported to all sub-makefiles to # prevent them from repeating the one-time initialisation. This prevents # the situation where we go "make" and content checking happens twice, # once for the web version and once for the print version. (Although I'm # not sure why it only happens twice --- I would have expected four times. # Go figure.) # export NOINIT?=x ################################################################################ # # Include variables defining the current paper. # include $(LOCAL_HANDBOOK_INCLUDE)/paper_variables.make ################################################################################ # # Defines which section we are currently building. This is actually the # path to the main folder for the section. Normally this is exported from # a higher-level makefile (i.e., "export SECTION=path/to/section"). # export SECTION?=$(notdir $(CURDIR)) ################################################################################ # # Define patterns for required source files. We define the basic variables # first (empty), then scan the make-includes directory for patterns files. # Each patterns file should add its patterns (using +=) to the appropriate # pattern variable from the following. # # QUESTIONS_PATTERNS defines the patterns for the "questions" version of # the handbook (both web and print). # QUESTIONS_PATTERNS:= # # ANSWERS_PATTERNS defines the patterns for the "answers" version of # the handbook (both web and print). # ANSWERS_PATTERNS:= # # _INSTALL_PATTERNS defines the patterns for installing on the web server. # QUESTION_INSTALL_PATTERNS:= ANSWER_INSTALL_PATTERNS:= # # Now go looking for patterns files in the local make-includes directory. # files should be named ".patterns" # include $(LOCAL_HANDBOOK_INCLUDE)/.patterns ################################################################################ # # Define lists of source directories that contain documents to be included # in the handbook. These are generated according to the values of the # patterns defined in the various pattern include files. # # Note that all the find commands are relative to the working directory of # the makefile that includes this file. Thus, if we are in the Tutorials # directory, all finds will be relative to this (and thus the lab patterns # won't find anything). The main consequence of this is that the # CLEAN_DIRS find will only generate a list of the directories that can be # cleaned _for the current section_. In practice, however, this will still # work as expected; if we're cleaning just that section, this is what we # want anyway, and if we're cleaning the entire handbook, the master # handbook makefile will call the makefile for each section separately. # ################################################################################ # # Directories for the complete collection of documents to be built for the # "questions" and "answers" versions of the handbook, respectively. Since # the tutorials variables will be empty when we're in the labs directory, # and vice versa, everything just works! # QUESTION_SRC_DIRS:=$(foreach p,$(QUESTIONS_PATTERNS),$(notdir $(shell find . -regex './'$(p)))) ANSWER_SRC_DIRS:=$(foreach p,$(ANSWERS_PATTERNS),$(notdir $(shell find . -regex './'$(p)))) QUESTION_INSTALL_DIRS:=$(foreach p,$(QUESTION_INSTALL_PATTERNS),$(notdir $(shell find . -regex './'$(p)))) ANSWER_INSTALL_DIRS:=$(foreach p,$(ANSWER_INSTALL_PATTERNS),$(notdir $(shell find . -regex './'$(p)))) # # List of directories that can be cleaned. "-mindepth 2" ensures # that we only include sub-directories of the current directory. # CLEAN_DIRS:=$(dir $(shell find . -mindepth 2 -name Makefile)) ################################################################################ # # Define lists of LaTeX source files. These will be written out to the # appropriate manifest file, so that the master handbook makefile can # import them into the handbook LaTeX build. Only the files specified by # the file patterns are included. The manifest file is also only updated # when necessary, i.e., when the list of files changes. # QUESTION_TEX_SOURCE:=$(foreach d,$(QUESTION_SRC_DIRS),$d/$d-questions.tex) ANSWER_TEX_SOURCE:=$(foreach d,$(ANSWER_SRC_DIRS),$d/$d-answers.tex) QUESTION_TEX_INPUTS:=$(foreach f,$(QUESTION_TEX_SOURCE),\\input{Sections/$(SECTION)/$(basename $f)}) ANSWER_TEX_INPUTS:=$(foreach f,$(ANSWER_TEX_SOURCE),\\input{Sections/$(SECTION)/$(basename $f)}) ################################################################################ # # Directory to install files into on web server. # INSTALL_DIRECTORY:=$(HANDBOOK_INSTALL_ROOT)/$(SUBJECT_CODE)$(PAPER_NUMBER)/www/$(SECTION) ################################################################################ # # Files to be installed on web server. # INSTALL_FILES:= ################################################################################ # # Lists of files for cleaning up. Add to these (using +=) as necessary in # derived makefiles. # WEB_CLEAN_FILES:= PRINT_CLEAN_FILES:=-manifest.tex ALL_CLEAN_FILES:=$(WEB_CLEAN_FILES) $(PRINT_CLEAN_FILES) ################################################################################ # # List of possible targets. If you need to add to this for a specific # case, use TARGETS+=xxx in the actual makefile. # TARGETS:=all targets debug install \ web web-questions web-answers \ print print-questions print-answers \ questions answers \ print-question-docs print-answer-docs \ clean web-clean print-clean .PHONY: $(TARGETS) ################################################################################ # # Build everything. # all: web print ################################################################################ # # Build questions or answers only. # questions: web-questions print-questions answers: web-answers print-answers ################################################################################ # # Build web version only. # web: web-questions web-answers web-questions: @$(foreach d,$(QUESTION_SRC_DIRS),$(MAKE) -C $d web-questions;) web-answers: @$(foreach d,$(ANSWER_SRC_DIRS),$(MAKE) -C $d web-answers;) ################################################################################ # # Build print version only. We also need to build the manifest files that # will be \input into the master handbook.tex document. # print: print-questions print-answers print-questions: print-question-docs question-manifest.tex print-question-docs: @$(foreach d,$(QUESTION_SRC_DIRS),$(MAKE) -C $d print-questions;) question-manifest.tex: $(QUESTION_TEX_SOURCE) $(LOCAL_HANDBOOK_INCLUDE)/questions.patterns @announce "Generating questions version manifest file in $(SECTION)" @echo $(QUESTION_TEX_INPUTS) > $@ question-pdfs: @$(foreach d,$(QUESTION_SRC_DIRS),$(MAKE) -C $d $d-questions.pdf $d-questions-2up.pdf;) print-answers: print-answer-docs answer-manifest.tex print-answer-docs: @$(foreach d,$(ANSWER_SRC_DIRS),$(MAKE) -C $d print-answers;) answer-manifest.tex: $(ANSWER_TEX_SOURCE) $(LOCAL_HANDBOOK_INCLUDE)/answers.patterns @announce "Generating answers version manifest file in $(SECTION)" @echo $(ANSWER_TEX_INPUTS) > $@ answer-pdfs: @$(foreach d,$(QUESTION_SRC_DIRS),$(MAKE) -C $d $d-answers.pdf $d-answers-2up.pdf;) ################################################################################ # # Install the appropriate files on the web server. This relies on the # environment variable HANDBOOK_INSTALL_DIRECTORY being defined, and # (assuming that this variable points to a directory on the network) the # appropriate share has been mounted. # install: @test -d $(HANDBOOK_INSTALL_ROOT) @announce "Installing questions in $(SECTION)" @$(foreach d,$(QUESTION_INSTALL_DIRS),$(MAKE) -C $d install-questions;) @announce "Installing answers in $(SECTION)" @$(foreach d,$(ANSWER_INSTALL_DIRS),$(MAKE) -C $d install-answers;) ifneq ($(strip $(INSTALL_FILES)),) @announce "Installing miscellaneous files in $(SECTION)" cp $(INSTALL_FILES) $(INSTALL_DIRECTORY) endif ################################################################################ # # Clean up all generated files. # "web-clean" and "print-clean" only clean up files for the web and print # versions, respectively. Note that "clean" isn't dependent on either # "web-clean" or "print-clean", to ensure that the correct target is # used when calling the sub-makefile. # clean: @$(foreach d,$(CLEAN_DIRS),$(MAKE) -C $d $@;) ifneq ($(strip $(ALL_CLEAN_FILES)),) -rm -f $(ALL_CLEAN_FILES) endif web-clean: @$(foreach d,$(CLEAN_DIRS),$(MAKE) -C $d $@;) ifneq ($(strip $(WEB_CLEAN_FILES)),) -rm -f $(WEB_CLEAN_FILES) endif print-clean: @$(foreach d,$(CLEAN_DIRS),$(MAKE) -C $d $@;) ifneq ($(strip $(PRINT_CLEAN_FILES)),) -rm -f $(PRINT_CLEAN_FILES) endif # # "init-clean" is a dummy target that can be used to ensure that the # content-checked marker files get deleted. Do a "make -C xxx" (i.e., # don't define NOINIT). The actual deletion is done by the one-time # initialisation in remove_content_marker_files.make. Note that there's no # point in this rule printing anything, because the output will probably # end up buried in a one-time initialisation "variable". # init-clean: ################################################################################ # # Debugging information, mostly lists of the generated variables. # debug: @announce Externally defined variables @echo "TEACHING_SHARED = [$(TEACHING_SHARED)]" @echo "HANDBOOK_INSTALL_ROOT = [$(HANDBOOK_INSTALL_ROOT)]" @echo "NOINIT = [$(NOINIT)]" @announce Internally defined variables @echo "GLOBAL_HANDBOOK_INCLUDE = [$(GLOBAL_HANDBOOK_INCLUDE)]" @echo "LOCAL_HANDBOOK_INCLUDE = [$(LOCAL_HANDBOOK_INCLUDE)]" @echo "QUESTIONS_PATTERNS = [$(QUESTIONS_PATTERNS)]" @echo "ANSWERS_PATTERNS = [$(ANSWERS_PATTERNS)]" @echo "QUESTION_INSTALL_PATTERNS = [$(QUESTION_INSTALL_PATTERNS)]" @echo "ANSWER_INSTALL_PATTERNS = [$(ANSWER_INSTALL_PATTERNS)]" @echo "SECTION = [$(SECTION)]" @echo "QUESTION_SRC_DIRS = [$(QUESTION_SRC_DIRS)]" @echo "ANSWER_SRC_DIRS = [$(ANSWER_SRC_DIRS)]" @echo "QUESTION_INSTALL_DIRS = [$(QUESTION_INSTALL_DIRS)]" @echo "ANSWER_INSTALL_DIRS = [$(ANSWER_INSTALL_DIRS)]" @echo "CLEAN_DIRS = [$(CLEAN_DIRS)]" @echo "QUESTION_TEX_SOURCE = [$(QUESTION_TEX_SOURCE)]" @echo "ANSWER_TEX_SOURCE = [$(ANSWER_TEX_SOURCE)]" @echo "QUESTION_TEX_INPUTS = [$(QUESTION_TEX_INPUTS)]" @echo "INSTALL_DIRECTORY = [$(INSTALL_DIRECTORY)]" @echo "INSTALL_FILES = [$(INSTALL_FILES)]" @echo "WEB_CLEAN_FILES = [$(WEB_CLEAN_FILES)]" @echo "PRINT_CLEAN_FILES = [$(PRINT_CLEAN_FILES)]" @echo "ALL_CLEAN_FILES = [$(ALL_CLEAN_FILES)]" ################################################################################ # # Print out the list of targets. Handy for when you forget! # targets: @echo $(TARGETS) ################################################################################ # # File: $Id$ # # Standard variables and rules for building a particular section of the # handbook. Altering these definitions will affect ALL SECTION MAKEFILES # FOR ALL PAPERS!! If you need to do something specific for a particular # paper, include a custom rule in its makefile. DON'T add it here! # ################################################################################ ################################################################################ # # Run one-time initialisation stuff, _unless_ NOINIT is defined. Any # "parent" makefile that's already done the same one-time initialisation # and calls this one should define NOINIT (the value doesn't matter) to # switch off one-time initialisation in this makefile. Thus if the # "parent" makefile calls this makefile several times, things like the # content checking will only happen once for a single invocation of the # "parent" makefile. # # When running this makefile standalone, _don't_ define NOINIT, and # everything will still work as expected. # ifndef NOINIT include $(GLOBAL_HANDBOOK_INCLUDE)/remove_content_marker_files.make endif # Now that the one-time initialsation is out of the way, ensure that # NOINIT (the value doesn't matter) is exported to all sub-makefiles to # prevent them from repeating the one-time initialisation. This prevents # the situation where we go "make" and content checking happens twice, # once for the web version and once for the print version. (Although I'm # not sure why it only happens twice --- I would have expected four times. # Go figure.) # export NOINIT?=x ################################################################################ # # Defines which section we are currently building. This is actually the # path to the main folder for the section. Normally this is exported from # a higher-level makefile (i.e., "export SECTION=path/to/section"). # export SECTION?=$(notdir $(CURDIR)) ################################################################################ # # Define patterns for required source files. We define the basic variables # first (empty), then scan the make-includes directory for patterns files. # Each patterns file should add its patterns (using +=) to the appropriate # pattern variable from the following. # # QUESTIONS_PATTERNS defines the patterns for the "questions" version of # the handbook (both web and print). # QUESTIONS_PATTERNS:= # # ANSWERS_PATTERNS defines the patterns for the "answers" version of # the handbook (both web and print). # ANSWERS_PATTERNS:= # # INSTALL_PATTERNS defines the patterns for installing on the web server. # INSTALL_PATTERNS:= # # Now go looking for patterns files in the local make-includes directory. # files should be named ".patterns" # include $(LOCAL_HANDBOOK_INCLUDE)/.patterns ################################################################################ # # Define lists of source directories that contain documents to be included # in the handbook. These are generated according to the values of the # patterns defined in the various pattern include files. # # Note that all the find commands are relative to the working directory of # the makefile that includes this file. Thus, if we are in the Tutorials # directory, all finds will be relative to this (and thus the lab patterns # won't find anything). The main consequence of this is that the # CLEAN_DIRS find will only generate a list of the directories that can be # cleaned _for the current section_. In practice, however, this will still # work as expected; if we're cleaning just that section, this is what we # want anyway, and if we're cleaning the entire handbook, the master # handbook makefile will call the makefile for each section separately. # ################################################################################ # # Directories for the complete collection of documents to be built for the # "questions" and "answers" versions of the handbook, respectively. Since # the tutorials variables will be empty when we're in the labs directory, # and vice versa, everything just works! # QUESTION_SRC_DIRS:=$(foreach p,$(QUESTIONS_PATTERNS),$(notdir $(shell find . -regex './'$(p)))) ANSWER_SRC_DIRS:=$(foreach p,$(ANSWERS_PATTERNS),$(notdir $(shell find . -regex './'$(p)))) # # List of directories that can be cleaned. "-mindepth 2" ensures # that we only include sub-directories of the current directory. # CLEAN_DIRS:=$(dir $(shell find . -mindepth 2 -name Makefile)) ################################################################################ # # Define lists of LaTeX source files. These will be written out to the # appropriate manifest file, so that the master handbook makefile can # import them into the handbook LaTeX build. Only the files specified by # the file patterns are included. The manifest file is also only updated # when necessary, i.e., when the list of files changes. # QUESTION_TEX_SOURCE:=$(foreach d,$(QUESTION_SRC_DIRS),$d/$d-questions.tex) ANSWER_TEX_SOURCE:=$(foreach d,$(ANSWER_SRC_DIRS),$d/$d-answers.tex) QUESTION_TEX_INPUTS:=$(foreach f,$(QUESTION_TEX_SOURCE),\\input{Sections/$(SECTION)/$(basename $f)}) ANSWER_TEX_INPUTS:=$(foreach f,$(ANSWER_TEX_SOURCE),\\input{Sections/$(SECTION)/$(basename $f)}) ################################################################################ # # Lists of files for cleaning up. Add to these (using +=) as necessary in # derived makefiles. # WEB_CLEAN_FILES:= PRINT_CLEAN_FILES:=*-manifest.tex ALL_CLEAN_FILES:=$(WEB_CLEAN_FILES) $(PRINT_CLEAN_FILES) ################################################################################ # # List of possible targets. If you need to add to this for a specific # case, use TARGETS+=xxx in the actual makefile. # TARGETS:=all targets debug \ web web-questions web-answers \ print print-questions print-answers \ questions answers \ print-question-docs print-answer-docs \ clean web-clean print-clean .PHONY: $(TARGETS) ################################################################################ # # Build everything. # all: web print ################################################################################ # # Build questions or answers only. # questions: web-questions print-questions answers: web-answers print-answers ################################################################################ # # Build web version only. # web: web-questions web-answers web-questions: @$(foreach d,$(QUESTION_SRC_DIRS),$(MAKE) -C $d web-questions;) web-answers: @$(foreach d,$(ANSWER_SRC_DIRS),$(MAKE) -C $d web-answers;) ################################################################################ # # Build print version only. We also need to build the manifest files that # will be \input into the master handbook.tex document. # print: print-questions print-answers print-questions: print-question-docs question-manifest.tex print-question-docs: @$(foreach d,$(QUESTION_SRC_DIRS),$(MAKE) -C $d print-questions;) question-manifest.tex: $(QUESTION_TEX_SOURCE) $(LOCAL_HANDBOOK_INCLUDE)/questions.patterns @announce "Generating questions version manifest file in $(SECTION)" @echo $(QUESTION_TEX_INPUTS) > $@ question-pdfs: @$(foreach d,$(QUESTION_SRC_DIRS),$(MAKE) -C $d $d-questions.pdf $d-questions-2up.pdf;) print-answers: print-answer-docs answer-manifest.tex print-answer-docs: @$(foreach d,$(ANSWER_SRC_DIRS),$(MAKE) -C $d print-answers;) answer-manifest.tex: $(ANSWER_TEX_SOURCE) $(LOCAL_HANDBOOK_INCLUDE)/answers.patterns @announce "Generating answers version manifest file in $(SECTION)" @echo $(ANSWER_TEX_INPUTS) > $@ answer-pdfs: @$(foreach d,$(QUESTION_SRC_DIRS),$(MAKE) -C $d $d-answers.pdf $d-answers-2up.pdf;) ################################################################################ # # Clean up all generated files. # "web-clean" and "print-clean" only clean up files for the web and print # versions, respectively. Note that "clean" isn't dependent on either # "web-clean" or "print-clean", to ensure that the correct target is # used when calling the sub-makefile. # clean: @$(foreach d,$(CLEAN_DIRS),$(MAKE) -C $d $@;) -rm -f $(ALL_CLEAN_FILES) web-clean: @$(foreach d,$(CLEAN_DIRS),$(MAKE) -C $d $@;) -rm -f $(WEB_CLEAN_FILES) print-clean: @$(foreach d,$(CLEAN_DIRS),$(MAKE) -C $d $@;) -rm -f $(PRINT_CLEAN_FILES) # # "init-clean" is a dummy target that can be used to ensure that the # content-checked marker files get deleted. Do a "make -C xxx" (i.e., # don't define NOINIT). The actual deletion is done by the one-time # initialisation in remove_content_marker_files.make. Note that there's no # point in this rule printing anything, because the output will probably # end up buried in a one-time initialisation "variable". # init-clean: ################################################################################ # # Debugging information, mostly lists of the generated variables. # debug: @echo "NOINIT = [$(NOINIT)]" @echo "GLOBAL_HANDBOOK_INCLUDE = [$(GLOBAL_HANDBOOK_INCLUDE)]" @echo "LOCAL_HANDBOOK_INCLUDE = [$(LOCAL_HANDBOOK_INCLUDE)]" @echo "QUESTIONS_PATTERNS = [$(QUESTIONS_PATTERNS)]" @echo "ANSWERS_PATTERNS = [$(ANSWERS_PATTERNS)]" @echo "SECTION = [$(SECTION)]" @echo "QUESTION_SRC_DIRS = [$(QUESTION_SRC_DIRS)]" @echo "ANSWER_SRC_DIRS = [$(ANSWER_SRC_DIRS)]" @echo "CLEAN_DIRS = [$(CLEAN_DIRS)]" @echo "QUESTION_TEX_SOURCE = [$(QUESTION_TEX_SOURCE)]" @echo "ANSWER_TEX_SOURCE = [$(ANSWER_TEX_SOURCE)]" @echo "QUESTION_TEX_INPUTS = [$(QUESTION_TEX_INPUTS)]" @echo "WEB_CLEAN_FILES = [$(WEB_CLEAN_FILES)]" @echo "PRINT_CLEAN_FILES = [$(PRINT_CLEAN_FILES)]" @echo "ALL_CLEAN_FILES = [$(ALL_CLEAN_FILES)]" ################################################################################ # # Print out the list of targets. Handy for when you forget! # targets: @echo $(TARGETS)

Ignore Space Show notes View

make-includes/build_section_rules.make

################################################################################
#
# File: $Id$
#
# Standard variables and rules for building a particular section of the
# handbook. Altering these definitions will affect ALL SECTION MAKEFILES
# FOR ALL PAPERS!! If you need to do something specific for a particular
# paper, include a custom rule in its makefile. DON'T add it here!
#
################################################################################

# Now that the one-time initialsation is out of the way, ensure that
# NOINIT (the value doesn't matter) is exported to all sub-makefiles to
# prevent them from repeating the one-time initialisation. This prevents
# the situation where we go "make" and content checking happens twice,
# once for the web version and once for the print version. (Although I'm
# not sure why it only happens twice --- I would have expected four times.
# Go figure.)
#
export NOINIT?=x

################################################################################
#
# Include variables defining the current paper.
#
include $(LOCAL_HANDBOOK_INCLUDE)/paper_variables.make

################################################################################
#
# Define patterns for required source files. We define the basic variables
# first (empty), then scan the make-includes directory for patterns files.
# Each patterns file should add its patterns (using +=) to the appropriate
# pattern variable from the following.
#
# QUESTIONS_PATTERNS defines the patterns for the "questions" version of
# the handbook (both web and print).
#
QUESTIONS_PATTERNS:=

#
# ANSWERS_PATTERNS defines the patterns for the "answers" version of
# the handbook (both web and print).
#
ANSWERS_PATTERNS:=

#
# *_INSTALL_PATTERNS defines the patterns for installing on the web server.
#
QUESTION_INSTALL_PATTERNS:=
ANSWER_INSTALL_PATTERNS:=

#
# Now go looking for patterns files in the local make-includes directory.
# files should be named "*.patterns"
#
include $(LOCAL_HANDBOOK_INCLUDE)/*.patterns

################################################################################
#
# Define lists of source directories that contain documents to be included
# in the handbook. These are generated according to the values of the
# patterns defined in the various pattern include files.
#
# Note that all the find commands are relative to the working directory of
# the makefile that includes this file. Thus, if we are in the Tutorials
# directory, all finds will be relative to this (and thus the lab patterns
# won't find anything). The main consequence of this is that the
# CLEAN_DIRS find will only generate a list of the directories that can be
# cleaned _for the current section_. In practice, however, this will still
# work as expected; if we're cleaning just that section, this is what we
# want anyway, and if we're cleaning the entire handbook, the master
# handbook makefile will call the makefile for each section separately.
#
################################################################################
#
# Directories for the complete collection of documents to be built for the
# "questions" and "answers" versions of the handbook, respectively. Since
# the tutorials variables will be empty when we're in the labs directory,
# and vice versa, everything just works!
#
QUESTION_SRC_DIRS:=$(foreach p,$(QUESTIONS_PATTERNS),$(notdir $(shell find . -regex '.*/'$(p))))

ANSWER_SRC_DIRS:=$(foreach p,$(ANSWERS_PATTERNS),$(notdir $(shell find . -regex '.*/'$(p))))

QUESTION_INSTALL_DIRS:=$(foreach p,$(QUESTION_INSTALL_PATTERNS),$(notdir $(shell find . -regex '.*/'$(p))))

ANSWER_INSTALL_DIRS:=$(foreach p,$(ANSWER_INSTALL_PATTERNS),$(notdir $(shell find . -regex '.*/'$(p))))

#
# List of directories that can be cleaned. "-mindepth 2" ensures
# that we only include sub-directories of the current directory.
#
CLEAN_DIRS:=$(dir $(shell find . -mindepth 2 -name Makefile))

################################################################################
#
# Define lists of LaTeX source files. These will be written out to the
# appropriate manifest file, so that the master handbook makefile can
# import them into the handbook LaTeX build. Only the files specified by
# the file patterns are included. The manifest file is also only updated
# when necessary, i.e., when the list of files changes.
#
QUESTION_TEX_SOURCE:=$(foreach d,$(QUESTION_SRC_DIRS),$d/$d-questions.tex)
ANSWER_TEX_SOURCE:=$(foreach d,$(ANSWER_SRC_DIRS),$d/$d-answers.tex)

QUESTION_TEX_INPUTS:=$(foreach f,$(QUESTION_TEX_SOURCE),\\input{Sections/$(SECTION)/$(basename $f)})
ANSWER_TEX_INPUTS:=$(foreach f,$(ANSWER_TEX_SOURCE),\\input{Sections/$(SECTION)/$(basename $f)})

################################################################################
#
# Files to be installed on web server.
#
INSTALL_FILES:=

################################################################################
#
# Lists of files for cleaning up. Add to these (using +=) as necessary in
# derived makefiles.
#
WEB_CLEAN_FILES:=
PRINT_CLEAN_FILES:=*-manifest.tex
ALL_CLEAN_FILES:=$(WEB_CLEAN_FILES) $(PRINT_CLEAN_FILES)

################################################################################
#
# List of possible targets. If you need to add to this for a specific
# case, use TARGETS+=xxx in the actual makefile.
#
TARGETS:=all targets debug install \
	web web-questions web-answers \
	print print-questions print-answers \
	questions answers \
	print-question-docs print-answer-docs \
	clean web-clean print-clean

.PHONY: $(TARGETS)

################################################################################
#
# Build everything.
#
all: web print

################################################################################
#
# Build questions or answers only.
#
questions: web-questions print-questions

answers: web-answers print-answers

################################################################################
#
# Build web version only.
#
web: web-questions web-answers

web-questions:
	@$(foreach d,$(QUESTION_SRC_DIRS),$(MAKE) -C $d web-questions;)

web-answers:
	@$(foreach d,$(ANSWER_SRC_DIRS),$(MAKE) -C $d web-answers;)

################################################################################
#
# Build print version only. We also need to build the manifest files that
# will be \input into the master handbook.tex document.
#
print: print-questions print-answers

print-questions: print-question-docs question-manifest.tex

print-question-docs:
	@$(foreach d,$(QUESTION_SRC_DIRS),$(MAKE) -C $d print-questions;)

question-manifest.tex: $(QUESTION_TEX_SOURCE) $(LOCAL_HANDBOOK_INCLUDE)/questions.patterns
	@announce "Generating questions version manifest file in $(SECTION)"
	@echo $(QUESTION_TEX_INPUTS) > $@

question-pdfs:
	@$(foreach d,$(QUESTION_SRC_DIRS),$(MAKE) -C $d $d-questions.pdf $d-questions-2up.pdf;)

print-answers: print-answer-docs answer-manifest.tex

print-answer-docs:
	@$(foreach d,$(ANSWER_SRC_DIRS),$(MAKE) -C $d print-answers;)

answer-manifest.tex: $(ANSWER_TEX_SOURCE) $(LOCAL_HANDBOOK_INCLUDE)/answers.patterns
	@announce "Generating answers version manifest file in $(SECTION)"
	@echo $(ANSWER_TEX_INPUTS) > $@

answer-pdfs:
	@$(foreach d,$(QUESTION_SRC_DIRS),$(MAKE) -C $d $d-answers.pdf $d-answers-2up.pdf;)

################################################################################
#
# Install the appropriate files on the web server. This relies on the
# environment variable HANDBOOK_INSTALL_DIRECTORY being defined, and
# (assuming that this variable points to a directory on the network) the
# appropriate share has been mounted.
#
install:
	@test -d $(HANDBOOK_INSTALL_ROOT)
	@announce "Installing questions in $(SECTION)"
	@$(foreach d,$(QUESTION_INSTALL_DIRS),$(MAKE) -C $d install-questions;)
	@announce "Installing answers in $(SECTION)"
	@$(foreach d,$(ANSWER_INSTALL_DIRS),$(MAKE) -C $d install-answers;)
ifneq ($(strip $(INSTALL_FILES)),)
	@announce "Installing miscellaneous files in $(SECTION)"
	cp $(INSTALL_FILES) $(INSTALL_DIRECTORY)
endif

################################################################################
#
# Clean up all generated files.
# "web-clean" and "print-clean" only clean up files for the web and print
# versions, respectively. Note that "clean" isn't dependent on either
# "web-clean" or "print-clean", to ensure that the correct target is
# used when calling the sub-makefile.
#
clean:
	@$(foreach d,$(CLEAN_DIRS),$(MAKE) -C $d $@;)
ifneq ($(strip $(ALL_CLEAN_FILES)),)
	-rm -f $(ALL_CLEAN_FILES)
endif

web-clean:
	@$(foreach d,$(CLEAN_DIRS),$(MAKE) -C $d $@;)
ifneq ($(strip $(WEB_CLEAN_FILES)),)
	-rm -f $(WEB_CLEAN_FILES)
endif

print-clean:
	@$(foreach d,$(CLEAN_DIRS),$(MAKE) -C $d $@;)
ifneq ($(strip $(PRINT_CLEAN_FILES)),)
	-rm -f $(PRINT_CLEAN_FILES)
endif

#
# "init-clean" is a dummy target that can be used to ensure that the
# content-checked marker files get deleted. Do a "make -C xxx" (i.e.,
# don't define NOINIT). The actual deletion is done by the one-time
# initialisation in remove_content_marker_files.make. Note that there's no
# point in this rule printing anything, because the output will probably
# end up buried in a one-time initialisation "variable".
#
init-clean:

################################################################################
#
# Debugging information, mostly lists of the generated variables.
#
debug:
	@announce Externally defined variables
	@echo "TEACHING_SHARED = [$(TEACHING_SHARED)]"
	@echo "HANDBOOK_INSTALL_ROOT = [$(HANDBOOK_INSTALL_ROOT)]"
	@echo "NOINIT = [$(NOINIT)]"
	@announce Internally defined variables
	@echo "GLOBAL_HANDBOOK_INCLUDE = [$(GLOBAL_HANDBOOK_INCLUDE)]"
	@echo "LOCAL_HANDBOOK_INCLUDE = [$(LOCAL_HANDBOOK_INCLUDE)]"
	@echo "QUESTIONS_PATTERNS = [$(QUESTIONS_PATTERNS)]"
	@echo "ANSWERS_PATTERNS = [$(ANSWERS_PATTERNS)]"
	@echo "QUESTION_INSTALL_PATTERNS = [$(QUESTION_INSTALL_PATTERNS)]"
	@echo "ANSWER_INSTALL_PATTERNS = [$(ANSWER_INSTALL_PATTERNS)]"
	@echo "SECTION = [$(SECTION)]"
	@echo "QUESTION_SRC_DIRS = [$(QUESTION_SRC_DIRS)]"
	@echo "ANSWER_SRC_DIRS = [$(ANSWER_SRC_DIRS)]"
	@echo "QUESTION_INSTALL_DIRS = [$(QUESTION_INSTALL_DIRS)]"
	@echo "ANSWER_INSTALL_DIRS = [$(ANSWER_INSTALL_DIRS)]"
	@echo "CLEAN_DIRS = [$(CLEAN_DIRS)]"
	@echo "QUESTION_TEX_SOURCE = [$(QUESTION_TEX_SOURCE)]"
	@echo "ANSWER_TEX_SOURCE = [$(ANSWER_TEX_SOURCE)]"
	@echo "QUESTION_TEX_INPUTS = [$(QUESTION_TEX_INPUTS)]"
	@echo "INSTALL_DIRECTORY = [$(INSTALL_DIRECTORY)]"
	@echo "INSTALL_FILES = [$(INSTALL_FILES)]"
	@echo "WEB_CLEAN_FILES = [$(WEB_CLEAN_FILES)]"
	@echo "PRINT_CLEAN_FILES = [$(PRINT_CLEAN_FILES)]"
	@echo "ALL_CLEAN_FILES = [$(ALL_CLEAN_FILES)]"

################################################################################
#
# Print out the list of targets. Handy for when you forget!
#
targets:
	@echo $(TARGETS)

#
# ANSWERS_PATTERNS defines the patterns for the "answers" version of
# the handbook (both web and print).
#
ANSWERS_PATTERNS:=

#
# INSTALL_PATTERNS defines the patterns for installing on the web server.
#
INSTALL_PATTERNS:=

#
# Now go looking for patterns files in the local make-includes directory.
# files should be named "*.patterns"
#
include $(LOCAL_HANDBOOK_INCLUDE)/*.patterns

ANSWER_SRC_DIRS:=$(foreach p,$(ANSWERS_PATTERNS),$(notdir $(shell find . -regex '.*/'$(p))))

#
# List of directories that can be cleaned. "-mindepth 2" ensures
# that we only include sub-directories of the current directory.
#
CLEAN_DIRS:=$(dir $(shell find . -mindepth 2 -name Makefile))

QUESTION_TEX_INPUTS:=$(foreach f,$(QUESTION_TEX_SOURCE),\\input{Sections/$(SECTION)/$(basename $f)})
ANSWER_TEX_INPUTS:=$(foreach f,$(ANSWER_TEX_SOURCE),\\input{Sections/$(SECTION)/$(basename $f)})

################################################################################
#
# Lists of files for cleaning up. Add to these (using +=) as necessary in
# derived makefiles.
#
WEB_CLEAN_FILES:=
PRINT_CLEAN_FILES:=*-manifest.tex
ALL_CLEAN_FILES:=$(WEB_CLEAN_FILES) $(PRINT_CLEAN_FILES)

################################################################################
#
# List of possible targets. If you need to add to this for a specific
# case, use TARGETS+=xxx in the actual makefile.
#
TARGETS:=all targets debug \
	web web-questions web-answers \
	print print-questions print-answers \
	questions answers \
	print-question-docs print-answer-docs \
	clean web-clean print-clean

.PHONY: $(TARGETS)

################################################################################
#
# Build everything.
#
all: web print

################################################################################
#
# Build questions or answers only.
#
questions: web-questions print-questions

answers: web-answers print-answers

################################################################################
#
# Build web version only.
#
web: web-questions web-answers

web-questions:
	@$(foreach d,$(QUESTION_SRC_DIRS),$(MAKE) -C $d web-questions;)

web-answers:
	@$(foreach d,$(ANSWER_SRC_DIRS),$(MAKE) -C $d web-answers;)

print-questions: print-question-docs question-manifest.tex

print-question-docs:
	@$(foreach d,$(QUESTION_SRC_DIRS),$(MAKE) -C $d print-questions;)

question-manifest.tex: $(QUESTION_TEX_SOURCE) $(LOCAL_HANDBOOK_INCLUDE)/questions.patterns
	@announce "Generating questions version manifest file in $(SECTION)"
	@echo $(QUESTION_TEX_INPUTS) > $@

question-pdfs:
	@$(foreach d,$(QUESTION_SRC_DIRS),$(MAKE) -C $d $d-questions.pdf $d-questions-2up.pdf;)

print-answers: print-answer-docs answer-manifest.tex

print-answer-docs:
	@$(foreach d,$(ANSWER_SRC_DIRS),$(MAKE) -C $d print-answers;)

answer-manifest.tex: $(ANSWER_TEX_SOURCE) $(LOCAL_HANDBOOK_INCLUDE)/answers.patterns
	@announce "Generating answers version manifest file in $(SECTION)"
	@echo $(ANSWER_TEX_INPUTS) > $@

answer-pdfs:
	@$(foreach d,$(QUESTION_SRC_DIRS),$(MAKE) -C $d $d-answers.pdf $d-answers-2up.pdf;)

web-clean:
	@$(foreach d,$(CLEAN_DIRS),$(MAKE) -C $d $@;)
	-rm -f $(WEB_CLEAN_FILES)

print-clean:
	@$(foreach d,$(CLEAN_DIRS),$(MAKE) -C $d $@;)
	-rm -f $(PRINT_CLEAN_FILES)

################################################################################
#
# Print out the list of targets. Handy for when you forget!
#
targets:
	@echo $(TARGETS)

Show line notes below