- Switched to new Blackboard deployment method (preliminary, may be buggy).

nigel.stanger / Handbook

Browse code - Switched to new Blackboard deployment method (preliminary, may be buggy). master
1 parent d001740 commit fea4bb8ad0589cafdc89fba8796bfcdb277e08ed nstanger authored on 16 Jul 2012

Patch

Showing 5 changed files

Ignore Space Show notes View make-includes/build_document_rules.make
################################################################################ # # File: $Id$ # # Standard variables and rules for building a particular document within a # section of the handbook (e.g., a single tutorial). Altering these # definitions will affect ALL DOCUMENT MAKEFILES FOR ALL PAPERS!! If you # need to do something specific for a particular paper, include a custom # rule in its makefile. DON'T add it here! # ################################################################################ ################################################################################ # # Run one-time initialisation stuff, _unless_ NOINIT is defined. Any # "parent" makefile that's already done the same one-time initialisation # and calls this one should define NOINIT (the value doesn't matter) to # switch off one-time initialisation in this makefile. Thus if the # "parent" makefile calls this makefile several times, things like the # content checking will only happen once for a single invocation of the # "parent" makefile. # # When running this makefile standalone, _don't_ define NOINIT, and # everything will still work as expected. # ifndef NOINIT include $(GLOBAL_HANDBOOK_INCLUDE)/remove_content_marker_files.make endif ################################################################################ # # Given that we print out our own messages, I see no point in splurging # "Entering...leaving directory" messages all over the screen. It's hard # enough to figure out what's going on already :) # MAKEFLAGS=--no-print-directory ################################################################################ # # Include variables defining the current paper. # include $(LOCAL_HANDBOOK_INCLUDE)/paper_variables.make ################################################################################ # # We make quite a lot of reference to files in the handbook directory, # so set a variable to point to it. PAPER_ROOT is defined in the include # file paper_variables.make. # HANDBOOK_ROOT:=$(PAPER_ROOT)/Handbook ################################################################################ # # Include XSLT functions. # include $(GLOBAL_HANDBOOK_INCLUDE)/xslt_functions.make ################################################################################ # # Defines which section we are currently building. This is actually the # path to the main folder for the section. Normally this is passed in as # an argument to make from a higher-level makefile (i.e., "make # SECTION=path/to/section"). # # Hmm, sh seems to convert uppercase letters in my paths to lowercase. # I'm not sure whether this will break anything or not... # # I _can_ confirm that having spaces anywhere in the parent path causes # serious breakage, because notdir returns bogus results in such cases. # All of the make functions assume whitespace delimitation, and there # doesn't seem to be any obvious way to work around this other than # eliminating spaces from the parent path (quoting the result of the # shell function below makes no difference). Fortunately, this is pretty # easy to do :) # # SECTION?=$(notdir $(shell cd ..; pwd)) ################################################################################ # # Set up the context for the current document. # # We use the same base name for both the directory and the document, which # makes life very easy :) # BASE_NAME:=$(notdir $(CURDIR)) # # SOURCE_XML is the original source XML, from which DERIVED_XML is # generated (the derived source has the includes for questions, etc., # inserted). # SOURCE_XML:=$(BASE_NAME).xml DERIVED_XML:=$(SOURCE_XML:.xml=-derived.xml) # # Define the names of the output files. # WEB_QUESTIONS_HTML:=$(BASE_NAME)-questions.html WEB_ANSWERS_HTML:=$(BASE_NAME)-answers.html PRINT_QUESTIONS_TEX:=$(WEB_QUESTIONS_HTML:.html=.tex) PRINT_ANSWERS_TEX:=$(WEB_ANSWERS_HTML:.html=.tex) PRINT_QUESTIONS_PDF_1UP:=$(PRINT_QUESTIONS_TEX:.tex=.pdf) PRINT_ANSWERS_PDF_1UP:=$(PRINT_ANSWERS_TEX:.tex=.pdf) PRINT_QUESTIONS_PDF_2UP:=$(PRINT_QUESTIONS_TEX:.tex=-2up.pdf) PRINT_ANSWERS_PDF_2UP:=$(PRINT_ANSWERS_TEX:.tex=-2up.pdf) # # Groupings of various web- and print-related files, for easy reference. # Feel free to add to these as necessary :) # DERIVED_WEB_FILES:=$(WEB_QUESTIONS_HTML) $(WEB_ANSWERS_HTML) DERIVED_PRINT_FILES:=$(PRINT_QUESTIONS_TEX) $(PRINT_ANSWERS_TEX) \ $(PRINT_QUESTIONS_PDF_1UP) $(PRINT_ANSWERS_PDF_1UP) \ $(PRINT_QUESTIONS_PDF_2UP) $(PRINT_ANSWERS_PDF_2UP) # # List of XSL stylesheets. If any of these change, we need to rebuild # everything. # # We can't use the resolver approach under Windows because of the DOS # pathnames. The style sheets come out of the resolver with paths like # C:\bar\foo\..., and make interprets the colon as an extra dependency # delimiter (tested and behaviour verified). Of course, this works fine on # any platform with sensible path standards. Quoting the value doesn't # help, unfortunately. Bugger :( # #XSLT_STYLESHEETS:=$(shell $(JAVA) org.apache.xml.resolver.apps.resolver -u file:///xml2html.xsl uri \| ( $(GREP) 'Result: file:' \|\| $(ECHO) '::xml2html.xsl' ) \| $(CUT) -d':' -f3-) $(shell $(JAVA) org.apache.xml.resolver.apps.resolver -u file:///xml2latex.xsl uri \| ( $(GREP) 'Result: file:' \|\| $(ECHO) '::xml2latex.xsl' ) \| $(CUT) -d':' -f3-) XSLT_STYLESHEETS:=$(TEACHING_SHARED)/Authoring/XML/xml2html.xsl $(TEACHING_SHARED)/Authoring/XML/xml2xhtml.xsl $(TEACHING_SHARED)/Authoring/XML/xml2latex.xsl $(TEACHING_SHARED)/Authoring/XML/xml2xelatex.xsl ################################################################################ # # Extract the list of included filenames from the source template. Hooray # for the shell function and Perl! Include file paths are found within the # href attributes of XML Include elements (<xi:include href="..." />). # All paths are relative to $(PAPER_ROOT). We don't use # $(PAPER_ROOT)/$(SECTION), because some of the include directories may be # in relatively arbitrary locations. # CONTENT_SRC:=$(shell $(PERL) -ne 'print "$(PAPER_ROOT)/$$2\n" if m{<xi:include .href="(\.\./)([^"]+)"};' $(SOURCE_XML)) ################################################################################ # # Directory to install files into on web server. # INSTALL_DIRECTORY:=$(HANDBOOK_INSTALL_ROOT)/$(SUBJECT_CODE)$(PAPER_NUMBER)/Blackboard/$(SECTION)/$(BASE_NAME) ################################################################################ # # Files to be installed on web server. # QUESTION_INSTALL_FILES:=$(WEB_QUESTIONS_HTML) $(PRINT_QUESTIONS_PDF_1UP) \ $(PRINT_QUESTIONS_PDF_2UP) $(wildcard .png) ANSWER_INSTALL_FILES:=$(WEB_ANSWERS_HTML) $(PRINT_ANSWERS_PDF_1UP) \ $(PRINT_ANSWERS_PDF_2UP) ################################################################################ # # Lists of files for cleaning up. Add to these (using +=) as necessary in # derived makefiles. Note that ALL_CLEAN_FILES comprises files that need # to be deleted _in addition_ to those listed in WEB_CLEAN_FILES and # PRINT_CLEAN_FILES (that is, it's the list of additional files for the # "clean" target, which depends on "web-clean" and "print-clean" anyway). # WEB_CLEAN_FILES:=$(DERIVED_WEB_FILES) -web.png PRINT_CLEAN_FILES:=$(DERIVED_PRINT_FILES) -print.png .pdf ALL_CLEAN_FILES:=$(DERIVED_XML) ################################################################################ # # List of possible targets. If you need to add to this for a specific # case, use TARGETS+=xxx in the actual makefile. # TARGETS:=all content targets debug install-questions install-answers \ web web-questions web-answers \ print print-questions print-answers \ questions answers \ clean web-clean print-clean .PHONY: $(TARGETS) ################################################################################ # # Build everything. # all: web print ################################################################################ # # Build questions or answers only. # questions: web-questions print-questions answers: web-answers print-answers ################################################################################ # # Build web version only. # web: web-questions web-answers web-questions: content $(WEB_QUESTIONS_HTML) $(WEB_QUESTIONS_HTML): $(DERIVED_XML) @$(ANNOUNCE) "Building $@ from $<" $(call xslt,$<,xml2html.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,paper-period,'$(PAPER_PERIOD)'),$(call xslt_parameter,standalone,'no'),$(call xslt_parameter,showanswers,'no'),$(call xslt_parameter,base-path,'.'),$(call xslt_parameter,image-format,'png')) > $@ web-answers: content $(WEB_ANSWERS_HTML) $(WEB_ANSWERS_HTML): $(DERIVED_XML) @$(ANNOUNCE) "Building $@ from $<" $(call xslt,$<,xml2html.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,paper-period,'$(PAPER_PERIOD)'),$(call xslt_parameter,standalone,'no'),$(call xslt_parameter,showanswers,'yes'),$(call xslt_parameter,base-path,'.'),$(call xslt_parameter,image-format,'png')) > $@ ################################################################################ # # Build print version only. We add code to the LaTeX source to mark the # first and last pages of the document, so that an individual PDF for this # document can be generated later. \markfirstpage and \marklastpage are # macros defined in handbook_template.tex that write the current physical # page number to the .aux file. # print: print-questions print-answers print-questions: content $(PRINT_QUESTIONS_TEX) $(PRINT_QUESTIONS_TEX): $(DERIVED_XML) @$(ANNOUNCE) "Building $@ from $<" @$(ECHO) "\\markfirstpage{$(SECTION)/$(BASE_NAME)/$(@:.tex=.pdf)}" > $@ $(call xslt,$<,xml2latex.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,paper-period,'$(PAPER_PERIOD)'),$(call xslt_parameter,standalone,'no'),$(call xslt_parameter,showanswers,'no'),$(call xslt_parameter,base-path,'sections/$(SECTION)/$(BASE_NAME)'),$(call xslt_parameter,image-format,'pdf')) >> $@ @$(ECHO) "\\marklastpage{$(SECTION)/$(BASE_NAME)/$(@:.tex=.pdf)}" >> $@ %-questions.pdf: %-questions.tex @$(ANNOUNCE) "Generating $@" @$(if $(wildcard $(HANDBOOK_ROOT)/handbook.pdf),,$(error $(HANDBOOK_ROOT)/handbook.pdf is missing)) @gs -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=$@ \ -dFirstPage=$(shell $(GREP) '$@.1up.first' $(HANDBOOK_ROOT)/handbook.aux \| $(CUT) -d= -f2) \ -dLastPage=$(shell $(GREP) '$@.1up.last' $(HANDBOOK_ROOT)/handbook.aux \| $(CUT) -d= -f2) $(HANDBOOK_ROOT)/handbook.pdf %-questions-2up.pdf: %-questions.tex @$(ANNOUNCE) "Generating $@" @$(if $(wildcard $(HANDBOOK_ROOT)/handbook-2up.pdf),,$(error $(HANDBOOK_ROOT)/handbook-2up.pdf is missing)) @gs -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=$@ \ -dFirstPage=$(shell $(GREP) '$(@:-2up.pdf=.pdf).2up.first' $(HANDBOOK_ROOT)/handbook.aux \| $(CUT) -d= -f2) \ -dLastPage=$(shell $(GREP) '$(@:-2up.pdf=.pdf).2up.last' $(HANDBOOK_ROOT)/handbook.aux \| $(CUT) -d= -f2) $(HANDBOOK_ROOT)/handbook-2up.pdf print-answers: content $(PRINT_ANSWERS_TEX) $(PRINT_ANSWERS_TEX): $(DERIVED_XML) @$(ANNOUNCE) "Building $@ from $<" @$(ECHO) "\\markfirstpage{$(SECTION)/$(BASE_NAME)/$(@:.tex=.pdf)}" > $@ $(call xslt,$<,xml2latex.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,paper-period,'$(PAPER_PERIOD)'),$(call xslt_parameter,standalone,'no'),$(call xslt_parameter,showanswers,'yes'),$(call xslt_parameter,base-path,'sections/$(SECTION)/$(BASE_NAME)'),$(call xslt_parameter,image-format,'pdf')) >> $@ @$(ECHO) "\\marklastpage{$(SECTION)/$(BASE_NAME)/$(@:.tex=.pdf)}" >> $@ %-answers.pdf: %-answers.tex @$(ANNOUNCE) "Generating $@" @$(if $(wildcard $(HANDBOOK_ROOT)/handbook-answers.pdf),,$(error $(HANDBOOK_ROOT)/handbook-answers.pdf is missing)) @gs -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=$@ \ -dFirstPage=$(shell $(GREP) '$@.1up.first' $(HANDBOOK_ROOT)/handbook-answers.aux \| $(CUT) -d= -f2) \ -dLastPage=$(shell $(GREP) '$@.1up.last' $(HANDBOOK_ROOT)/handbook-answers.aux \| $(CUT) -d= -f2) $(HANDBOOK_ROOT)/handbook-answers.pdf %-answers-2up.pdf: %-answers.tex @$(ANNOUNCE) "Generating $@" @$(if $(wildcard $(HANDBOOK_ROOT)/handbook-answers-2up.pdf),,$(error $(HANDBOOK_ROOT)/handbook-answers-2up.pdf is missing)) @gs -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=$@ \ -dFirstPage=$(shell $(GREP) '$(@:-2up.pdf=.pdf).2up.first' $(HANDBOOK_ROOT)/handbook-answers.aux \| $(CUT) -d= -f2) \ -dLastPage=$(shell $(GREP) '$(@:-2up.pdf=.pdf).2up.last' $(HANDBOOK_ROOT)/handbook-answers.aux \| $(CUT) -d= -f2) $(HANDBOOK_ROOT)/handbook-answers-2up.pdf ################################################################################ # # Generate the derived XML source from the original XML template. # This is done by simply running the original source through xmllint # with the --xinclude option to process all the xi:include elements. # The result of this could have just been piped into the XSLT processor, # except that (a) not all of the processors support input from stdin, # and (b) combining both xmllint and XSLT processing into one command # means that make won't stop if there's any errors from xmllint. # # Sed is used to add a comment to the derived XML file, warning that this # is generated and shouldn't be edited. Sed was used because the <?xml?> # processing instruction MUST be on the first line. The implication here # is that all input source files have an <?xml?> processing instruction # (which they should anyway). # $(DERIVED_XML): $(SOURCE_XML) $(XSLT_STYLESHEETS) @$(ANNOUNCE) "Generating $@" @$(XMLLINT) --xinclude $< >$@ @$(SED) -i -e '1a <!-- THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT! -->' $@ ################################################################################ # # If any of the content files change, touch the XML template to # ensure that the document gets fully rebuilt. # $(SOURCE_XML): $(CONTENT_SRC) @$(TOUCH) $@ ################################################################################ # # Build the individual content files, etc., as necessary. Note above that # all the primary targets depend on the "content" target, _before_ # anything else. This ensures that the content gets rebuilt (if necessary) # before anything else happens. # # This may seem redundant, given that SOURCE_XML depends on CONTENT_SRC in # the rule above. However, this rule only works if we change one of the # actual content files. What if instead, we change a graphic associated # with one of the content files, without changing the content file itself? # In this case, make assumes that nothing needs to be done, because the # content file is older than the target, and this makefile knows nothing # about any dependencies that the content file might have (that's dealt # with by the makefile in the appropriate content directory). This is the # main downside of having independent makefiles. # # So, the slightly convoluted workaround using the empty "content" target # ensures that the content files will always be checked, regardless of # whether they've changed. If any of their prerequisites for a particular # content file change, then the content file itself will be touched, thus # activating the SOURCE_XML rule above. This process is particularly # important to ensure that associated graphics get rebuilt when they # change. # # All that aside, however, the _real_ trick is to ensure that this rule is # only executed once. If we do a "make", this rule would nominally get # executed four times (once for each of the targets that depend on # "content"). The first time through the rule, therefore, we create a # marker file called "content-checked". If this file exists, the rule # isn't executed. These marker files are cleaned up by a one-off find # command when the makefile is first run (see the include file # one-time-init.make). # # Note: using the wildcard function to test for the existence of the # marker file doesn't work when the makefile is run standalone, because # the function result is expanded at the time the makefile is _loaded_, # _before_ the one-time initialisation has a change to kick in and delete # the file. This has the rather bizarre side-effect of the makefile only # re-checking the content on every second run, and means that we can't use # make conditionals to control rule execution. The solution is to prefix # every command in the rule with "test ! -f" to check whether the marker # file exists. # # Ack! The tribulations of not using a monolithic makefile... # content: # Of course, there's little point in doing anything if there's no content! ifneq ($(strip $(CONTENT_SRC)),) @if $(TEST) ! -f content-checked; then \ $(ANNOUNCE) "Checking content for $(BASE_NAME)"; \ fi # Sanity check: do the content files referenced from the original source # actually exist? The "$(TRUE)" is included because there needs to # be something in the body of the if --- you can't just leave it empty. We # can use the wildcard function here because these files should already # exist --- if they don't, then by definition the filename is wrong! @if $(TEST) ! -f content-checked; then \ $(foreach f,$(CONTENT_SRC),$(if $(wildcard $f),,$(error Content file $f referenced from $(SOURCE_XML) does not exist)) $(TRUE);) \ fi # Remake each individual content file. @if $(TEST) ! -f content-checked; then \ $(foreach f,$(CONTENT_SRC),if $(MAKE) -C $(dir $f) $(notdir $f) BUILD_DIR=$(CURDIR); then $(TRUE); else exit 1; fi;) \ fi # Create the marker file so that this rule doesn't get executed again. @if $(TEST) ! -f content-checked; then \ $(TOUCH) content-checked; \ fi endif ################################################################################ # # Link the appropriate files to the deployment directory. This relies on the # environment variable HANDBOOK_INSTALL_DIRECTORY being defined, and # and that it points to a valid directory. # # This checks each file in the build directory against the corresponding # file in the install directory. The local file is only copied to the # install directory if it is newer, or the remote file doesn't exist. I # was going to do the "newer" testing using a target rule that dealt with # each file individually, but for some weird reason it would ignore any # additional files appended to the _INSTALL_FILES variables. So I've done # it with a foreach instead, which _does_ work. (Ick, although ironically # the code is shorter.) # # !!! How do we get it to also install any extra files that we require # for a particular content file (e.g., the SQL code for Tutorial 3)? !!! # install-questions: @$(TEST) -d $(HANDBOOK_INSTALL_ROOT) @$(MKDIR_P) $(INSTALL_DIRECTORY) @$(foreach f,$(QUESTION_INSTALL_FILES),if $(TEST) ! -f $(INSTALL_DIRECTORY)/$(f) -o $(CURDIR)/$(f) -nt $(INSTALL_DIRECTORY)/$(f); then $(ECHO) "Linking $(f)"; $(LN_S) $(CURDIR)/$(f) $(INSTALL_DIRECTORY); fi;) install-answers: @$(TEST) -d $(HANDBOOK_INSTALL_ROOT) @$(MKDIR_P) $(INSTALL_DIRECTORY) @$(foreach f,$(ANSWER_INSTALL_FILES),if $(TEST) ! -f $(INSTALL_DIRECTORY)/$(f) -o $(CURDIR)/$(f) -nt $(INSTALL_DIRECTORY)/$(f); then $(ECHO) "Linking $(f)"; $(LN_S) $(CURDIR)/$(f) $(INSTALL_DIRECTORY); fi;) ################################################################################ # # Clean up. # clean: web-clean print-clean ifneq ($(strip $(ALL_CLEAN_FILES)),) -$(RM) -f $(ALL_CLEAN_FILES) endif web-clean: ifneq ($(strip $(WEB_CLEAN_FILES)),) -$(RM) -f $(WEB_CLEAN_FILES) endif print-clean: ifneq ($(strip $(PRINT_CLEAN_FILES)),) -$(RM) -f $(PRINT_CLEAN_FILES) endif ################################################################################ # # Debugging information, mostly lists of the generated variables. # debug: @$(ANNOUNCE) Externally defined variables @$(ECHO) "TEACHING_SHARED = [$(TEACHING_SHARED)]" @$(ECHO) "ALL_PAPERS_ROOT = [$(ALL_PAPERS_ROOT)]" @$(ECHO) "HANDBOOK_INSTALL_ROOT = [$(HANDBOOK_INSTALL_ROOT)]" @$(ECHO) "NOINIT = [$(NOINIT)]" @$(ANNOUNCE) Internally defined variables @$(ECHO) "GLOBAL_HANDBOOK_INCLUDE = [$(GLOBAL_HANDBOOK_INCLUDE)]" @$(ECHO) "LOCAL_HANDBOOK_INCLUDE = [$(LOCAL_HANDBOOK_INCLUDE)]" @$(ECHO) "SUBJECT_CODE = [$(SUBJECT_CODE)]" @$(ECHO) "PAPER_NUMBER = [$(PAPER_NUMBER)]" @$(ECHO) "PAPER_YEAR = [$(PAPER_YEAR)]" @$(ECHO) "PAPER_PERIOD = [$(PAPER_PERIOD)]" @$(ECHO) "PAPER_ROOT = [$(PAPER_ROOT)]" @$(ECHO) "HANDBOOK_ROOT = [$(HANDBOOK_ROOT)]" @$(ECHO) "SECTION = [$(SECTION)]" @$(ECHO) "BASE_NAME = [$(BASE_NAME)]" @$(ECHO) "SOURCE_XML = [$(SOURCE_XML)]" @$(ECHO) "DERIVED_XML = [$(DERIVED_XML)]" @$(ECHO) "WEB_QUESTIONS_HTML = [$(WEB_QUESTIONS_HTML)]" @$(ECHO) "WEB_ANSWERS_HTML = [$(WEB_ANSWERS_HTML)]" @$(ECHO) "PRINT_QUESTIONS_TEX = [$(PRINT_QUESTIONS_TEX)]" @$(ECHO) "PRINT_ANSWERS_TEX = [$(PRINT_ANSWERS_TEX)]" @$(ECHO) "PRINT_QUESTIONS_PDF_1UP = [$(PRINT_QUESTIONS_PDF_1UP)]" @$(ECHO) "PRINT_ANSWERS_PDF_1UP = [$(PRINT_ANSWERS_PDF_1UP)]" @$(ECHO) "PRINT_QUESTIONS_PDF_2UP = [$(PRINT_QUESTIONS_PDF_2UP)]" @$(ECHO) "PRINT_ANSWERS_PDF_2UP = [$(PRINT_ANSWERS_PDF_2UP)]" @$(ECHO) "DERIVED_WEB_FILES = [$(DERIVED_WEB_FILES)]" @$(ECHO) "DERIVED_PRINT_FILES = [$(DERIVED_PRINT_FILES)]" @$(ECHO) "XSLT_STYLESHEETS = [$(XSLT_STYLESHEETS)]" @$(ECHO) "CONTENT_SRC = [$(CONTENT_SRC)]" @$(ECHO) "INSTALL_DIRECTORY = [$(INSTALL_DIRECTORY)]" @$(ECHO) "QUESTION_INSTALL_FILES = [$(QUESTION_INSTALL_FILES)]" @$(ECHO) "ANSWER_INSTALL_FILES = [$(ANSWER_INSTALL_FILES)]" @$(ECHO) "WEB_CLEAN_FILES = [$(WEB_CLEAN_FILES)]" @$(ECHO) "PRINT_CLEAN_FILES = [$(PRINT_CLEAN_FILES)]" @$(ECHO) "ALL_CLEAN_FILES = [$(ALL_CLEAN_FILES)]" ################################################################################ # # Print out the list of targets. Handy for when you forget! # targets: @$(ECHO) $(TARGETS) ################################################################################ # # File: $Id$ # # Standard variables and rules for building a particular document within a # section of the handbook (e.g., a single tutorial). Altering these # definitions will affect ALL DOCUMENT MAKEFILES FOR ALL PAPERS!! If you # need to do something specific for a particular paper, include a custom # rule in its makefile. DON'T add it here! # ################################################################################ ################################################################################ # # Run one-time initialisation stuff, _unless_ NOINIT is defined. Any # "parent" makefile that's already done the same one-time initialisation # and calls this one should define NOINIT (the value doesn't matter) to # switch off one-time initialisation in this makefile. Thus if the # "parent" makefile calls this makefile several times, things like the # content checking will only happen once for a single invocation of the # "parent" makefile. # # When running this makefile standalone, _don't_ define NOINIT, and # everything will still work as expected. # ifndef NOINIT include $(GLOBAL_HANDBOOK_INCLUDE)/remove_content_marker_files.make endif ################################################################################ # # Given that we print out our own messages, I see no point in splurging # "Entering...leaving directory" messages all over the screen. It's hard # enough to figure out what's going on already :) # MAKEFLAGS=--no-print-directory ################################################################################ # # Include variables defining the current paper. # include $(LOCAL_HANDBOOK_INCLUDE)/paper_variables.make ################################################################################ # # We make quite a lot of reference to files in the handbook directory, # so set a variable to point to it. PAPER_ROOT is defined in the include # file paper_variables.make. # HANDBOOK_ROOT:=$(PAPER_ROOT)/Handbook ################################################################################ # # Include XSLT functions. # include $(GLOBAL_HANDBOOK_INCLUDE)/xslt_functions.make ################################################################################ # # Defines which section we are currently building. This is actually the # path to the main folder for the section. Normally this is passed in as # an argument to make from a higher-level makefile (i.e., "make # SECTION=path/to/section"). # # Hmm, sh seems to convert uppercase letters in my paths to lowercase. # I'm not sure whether this will break anything or not... # # I _can_ confirm that having spaces anywhere in the parent path causes # serious breakage, because notdir returns bogus results in such cases. # All of the make functions assume whitespace delimitation, and there # doesn't seem to be any obvious way to work around this other than # eliminating spaces from the parent path (quoting the result of the # shell function below makes no difference). Fortunately, this is pretty # easy to do :) # # SECTION?=$(notdir $(shell cd ..; pwd)) ################################################################################ # # Set up the context for the current document. # # We use the same base name for both the directory and the document, which # makes life very easy :) # BASE_NAME:=$(notdir $(CURDIR)) # # SOURCE_XML is the original source XML, from which DERIVED_XML is # generated (the derived source has the includes for questions, etc., # inserted). # SOURCE_XML:=$(BASE_NAME).xml DERIVED_XML:=$(SOURCE_XML:.xml=-derived.xml) # # Define the names of the output files. # WEB_QUESTIONS_HTML:=$(BASE_NAME)-questions.html WEB_ANSWERS_HTML:=$(BASE_NAME)-answers.html PRINT_QUESTIONS_TEX:=$(WEB_QUESTIONS_HTML:.html=.tex) PRINT_ANSWERS_TEX:=$(WEB_ANSWERS_HTML:.html=.tex) PRINT_QUESTIONS_PDF_1UP:=$(PRINT_QUESTIONS_TEX:.tex=.pdf) PRINT_ANSWERS_PDF_1UP:=$(PRINT_ANSWERS_TEX:.tex=.pdf) PRINT_QUESTIONS_PDF_2UP:=$(PRINT_QUESTIONS_TEX:.tex=-2up.pdf) PRINT_ANSWERS_PDF_2UP:=$(PRINT_ANSWERS_TEX:.tex=-2up.pdf) # # Groupings of various web- and print-related files, for easy reference. # Feel free to add to these as necessary :) # DERIVED_WEB_FILES:=$(WEB_QUESTIONS_HTML) $(WEB_ANSWERS_HTML) DERIVED_PRINT_FILES:=$(PRINT_QUESTIONS_TEX) $(PRINT_ANSWERS_TEX) \ $(PRINT_QUESTIONS_PDF_1UP) $(PRINT_ANSWERS_PDF_1UP) \ $(PRINT_QUESTIONS_PDF_2UP) $(PRINT_ANSWERS_PDF_2UP) # # List of XSL stylesheets. If any of these change, we need to rebuild # everything. # # We can't use the resolver approach under Windows because of the DOS # pathnames. The style sheets come out of the resolver with paths like # C:\bar\foo\..., and make interprets the colon as an extra dependency # delimiter (tested and behaviour verified). Of course, this works fine on # any platform with sensible path standards. Quoting the value doesn't # help, unfortunately. Bugger :( # #XSLT_STYLESHEETS:=$(shell $(JAVA) org.apache.xml.resolver.apps.resolver -u file:///xml2html.xsl uri \| ( $(GREP) 'Result: file:' \|\| $(ECHO) '::xml2html.xsl' ) \| $(CUT) -d':' -f3-) $(shell $(JAVA) org.apache.xml.resolver.apps.resolver -u file:///xml2latex.xsl uri \| ( $(GREP) 'Result: file:' \|\| $(ECHO) '::xml2latex.xsl' ) \| $(CUT) -d':' -f3-) XSLT_STYLESHEETS:=$(TEACHING_SHARED)/Authoring/XML/xml2html.xsl $(TEACHING_SHARED)/Authoring/XML/xml2xhtml.xsl $(TEACHING_SHARED)/Authoring/XML/xml2latex.xsl $(TEACHING_SHARED)/Authoring/XML/xml2xelatex.xsl ################################################################################ # # Extract the list of included filenames from the source template. Hooray # for the shell function and Perl! Include file paths are found within the # href attributes of XML Include elements (<xi:include href="..." />). # All paths are relative to $(PAPER_ROOT). We don't use # $(PAPER_ROOT)/$(SECTION), because some of the include directories may be # in relatively arbitrary locations. # CONTENT_SRC:=$(shell $(PERL) -ne 'print "$(PAPER_ROOT)/$$2\n" if m{<xi:include .href="(\.\./)([^"]+)"};' $(SOURCE_XML)) ################################################################################ # # Directory to install files into on web server. # INSTALL_DIRECTORY:=$(HANDBOOK_INSTALL_ROOT)/$(SUBJECT_CODE)$(PAPER_NUMBER)/www/$(SECTION)/$(BASE_NAME) ################################################################################ # # Files to be installed on web server. # QUESTION_INSTALL_FILES:=$(WEB_QUESTIONS_HTML) $(PRINT_QUESTIONS_PDF_1UP) \ $(PRINT_QUESTIONS_PDF_2UP) $(wildcard .png) ANSWER_INSTALL_FILES:=$(WEB_ANSWERS_HTML) $(PRINT_ANSWERS_PDF_1UP) \ $(PRINT_ANSWERS_PDF_2UP) ################################################################################ # # Lists of files for cleaning up. Add to these (using +=) as necessary in # derived makefiles. Note that ALL_CLEAN_FILES comprises files that need # to be deleted _in addition_ to those listed in WEB_CLEAN_FILES and # PRINT_CLEAN_FILES (that is, it's the list of additional files for the # "clean" target, which depends on "web-clean" and "print-clean" anyway). # WEB_CLEAN_FILES:=$(DERIVED_WEB_FILES) -web.png PRINT_CLEAN_FILES:=$(DERIVED_PRINT_FILES) -print.png .pdf ALL_CLEAN_FILES:=$(DERIVED_XML) ################################################################################ # # List of possible targets. If you need to add to this for a specific # case, use TARGETS+=xxx in the actual makefile. # TARGETS:=all content targets debug install-questions install-answers \ web web-questions web-answers \ print print-questions print-answers \ questions answers \ clean web-clean print-clean .PHONY: $(TARGETS) ################################################################################ # # Build everything. # all: web print ################################################################################ # # Build questions or answers only. # questions: web-questions print-questions answers: web-answers print-answers ################################################################################ # # Build web version only. # web: web-questions web-answers web-questions: content $(WEB_QUESTIONS_HTML) $(WEB_QUESTIONS_HTML): $(DERIVED_XML) @$(ANNOUNCE) "Building $@ from $<" $(call xslt,$<,xml2html.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,paper-period,'$(PAPER_PERIOD)'),$(call xslt_parameter,standalone,'no'),$(call xslt_parameter,showanswers,'no'),$(call xslt_parameter,base-path,'.'),$(call xslt_parameter,image-format,'png')) > $@ web-answers: content $(WEB_ANSWERS_HTML) $(WEB_ANSWERS_HTML): $(DERIVED_XML) @$(ANNOUNCE) "Building $@ from $<" $(call xslt,$<,xml2html.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,paper-period,'$(PAPER_PERIOD)'),$(call xslt_parameter,standalone,'no'),$(call xslt_parameter,showanswers,'yes'),$(call xslt_parameter,base-path,'.'),$(call xslt_parameter,image-format,'png')) > $@ ################################################################################ # # Build print version only. We add code to the LaTeX source to mark the # first and last pages of the document, so that an individual PDF for this # document can be generated later. \markfirstpage and \marklastpage are # macros defined in handbook_template.tex that write the current physical # page number to the .aux file. # print: print-questions print-answers print-questions: content $(PRINT_QUESTIONS_TEX) $(PRINT_QUESTIONS_TEX): $(DERIVED_XML) @$(ANNOUNCE) "Building $@ from $<" @$(ECHO) "\\markfirstpage{$(SECTION)/$(BASE_NAME)/$(@:.tex=.pdf)}" > $@ $(call xslt,$<,xml2latex.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,paper-period,'$(PAPER_PERIOD)'),$(call xslt_parameter,standalone,'no'),$(call xslt_parameter,showanswers,'no'),$(call xslt_parameter,base-path,'sections/$(SECTION)/$(BASE_NAME)'),$(call xslt_parameter,image-format,'pdf')) >> $@ @$(ECHO) "\\marklastpage{$(SECTION)/$(BASE_NAME)/$(@:.tex=.pdf)}" >> $@ %-questions.pdf: %-questions.tex @$(ANNOUNCE) "Generating $@" @$(if $(wildcard $(HANDBOOK_ROOT)/handbook.pdf),,$(error $(HANDBOOK_ROOT)/handbook.pdf is missing)) @gs -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=$@ \ -dFirstPage=$(shell $(GREP) '$@.1up.first' $(HANDBOOK_ROOT)/handbook.aux \| $(CUT) -d= -f2) \ -dLastPage=$(shell $(GREP) '$@.1up.last' $(HANDBOOK_ROOT)/handbook.aux \| $(CUT) -d= -f2) $(HANDBOOK_ROOT)/handbook.pdf %-questions-2up.pdf: %-questions.tex @$(ANNOUNCE) "Generating $@" @$(if $(wildcard $(HANDBOOK_ROOT)/handbook-2up.pdf),,$(error $(HANDBOOK_ROOT)/handbook-2up.pdf is missing)) @gs -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=$@ \ -dFirstPage=$(shell $(GREP) '$(@:-2up.pdf=.pdf).2up.first' $(HANDBOOK_ROOT)/handbook.aux \| $(CUT) -d= -f2) \ -dLastPage=$(shell $(GREP) '$(@:-2up.pdf=.pdf).2up.last' $(HANDBOOK_ROOT)/handbook.aux \| $(CUT) -d= -f2) $(HANDBOOK_ROOT)/handbook-2up.pdf print-answers: content $(PRINT_ANSWERS_TEX) $(PRINT_ANSWERS_TEX): $(DERIVED_XML) @$(ANNOUNCE) "Building $@ from $<" @$(ECHO) "\\markfirstpage{$(SECTION)/$(BASE_NAME)/$(@:.tex=.pdf)}" > $@ $(call xslt,$<,xml2latex.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,paper-period,'$(PAPER_PERIOD)'),$(call xslt_parameter,standalone,'no'),$(call xslt_parameter,showanswers,'yes'),$(call xslt_parameter,base-path,'sections/$(SECTION)/$(BASE_NAME)'),$(call xslt_parameter,image-format,'pdf')) >> $@ @$(ECHO) "\\marklastpage{$(SECTION)/$(BASE_NAME)/$(@:.tex=.pdf)}" >> $@ %-answers.pdf: %-answers.tex @$(ANNOUNCE) "Generating $@" @$(if $(wildcard $(HANDBOOK_ROOT)/handbook-answers.pdf),,$(error $(HANDBOOK_ROOT)/handbook-answers.pdf is missing)) @gs -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=$@ \ -dFirstPage=$(shell $(GREP) '$@.1up.first' $(HANDBOOK_ROOT)/handbook-answers.aux \| $(CUT) -d= -f2) \ -dLastPage=$(shell $(GREP) '$@.1up.last' $(HANDBOOK_ROOT)/handbook-answers.aux \| $(CUT) -d= -f2) $(HANDBOOK_ROOT)/handbook-answers.pdf %-answers-2up.pdf: %-answers.tex @$(ANNOUNCE) "Generating $@" @$(if $(wildcard $(HANDBOOK_ROOT)/handbook-answers-2up.pdf),,$(error $(HANDBOOK_ROOT)/handbook-answers-2up.pdf is missing)) @gs -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=$@ \ -dFirstPage=$(shell $(GREP) '$(@:-2up.pdf=.pdf).2up.first' $(HANDBOOK_ROOT)/handbook-answers.aux \| $(CUT) -d= -f2) \ -dLastPage=$(shell $(GREP) '$(@:-2up.pdf=.pdf).2up.last' $(HANDBOOK_ROOT)/handbook-answers.aux \| $(CUT) -d= -f2) $(HANDBOOK_ROOT)/handbook-answers-2up.pdf ################################################################################ # # Generate the derived XML source from the original XML template. # This is done by simply running the original source through xmllint # with the --xinclude option to process all the xi:include elements. # The result of this could have just been piped into the XSLT processor, # except that (a) not all of the processors support input from stdin, # and (b) combining both xmllint and XSLT processing into one command # means that make won't stop if there's any errors from xmllint. # # Sed is used to add a comment to the derived XML file, warning that this # is generated and shouldn't be edited. Sed was used because the <?xml?> # processing instruction MUST be on the first line. The implication here # is that all input source files have an <?xml?> processing instruction # (which they should anyway). # $(DERIVED_XML): $(SOURCE_XML) $(XSLT_STYLESHEETS) @$(ANNOUNCE) "Generating $@" @$(XMLLINT) --xinclude $< >$@ @$(SED) -i -e '1a <!-- THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT! -->' $@ ################################################################################ # # If any of the content files change, touch the XML template to # ensure that the document gets fully rebuilt. # $(SOURCE_XML): $(CONTENT_SRC) @$(TOUCH) $@ ################################################################################ # # Build the individual content files, etc., as necessary. Note above that # all the primary targets depend on the "content" target, _before_ # anything else. This ensures that the content gets rebuilt (if necessary) # before anything else happens. # # This may seem redundant, given that SOURCE_XML depends on CONTENT_SRC in # the rule above. However, this rule only works if we change one of the # actual content files. What if instead, we change a graphic associated # with one of the content files, without changing the content file itself? # In this case, make assumes that nothing needs to be done, because the # content file is older than the target, and this makefile knows nothing # about any dependencies that the content file might have (that's dealt # with by the makefile in the appropriate content directory). This is the # main downside of having independent makefiles. # # So, the slightly convoluted workaround using the empty "content" target # ensures that the content files will always be checked, regardless of # whether they've changed. If any of their prerequisites for a particular # content file change, then the content file itself will be touched, thus # activating the SOURCE_XML rule above. This process is particularly # important to ensure that associated graphics get rebuilt when they # change. # # All that aside, however, the _real_ trick is to ensure that this rule is # only executed once. If we do a "make", this rule would nominally get # executed four times (once for each of the targets that depend on # "content"). The first time through the rule, therefore, we create a # marker file called "content-checked". If this file exists, the rule # isn't executed. These marker files are cleaned up by a one-off find # command when the makefile is first run (see the include file # one-time-init.make). # # Note: using the wildcard function to test for the existence of the # marker file doesn't work when the makefile is run standalone, because # the function result is expanded at the time the makefile is _loaded_, # _before_ the one-time initialisation has a change to kick in and delete # the file. This has the rather bizarre side-effect of the makefile only # re-checking the content on every second run, and means that we can't use # make conditionals to control rule execution. The solution is to prefix # every command in the rule with "test ! -f" to check whether the marker # file exists. # # Ack! The tribulations of not using a monolithic makefile... # content: # Of course, there's little point in doing anything if there's no content! ifneq ($(strip $(CONTENT_SRC)),) @if $(TEST) ! -f content-checked; then \ $(ANNOUNCE) "Checking content for $(BASE_NAME)"; \ fi # Sanity check: do the content files referenced from the original source # actually exist? The "$(TRUE)" is included because there needs to # be something in the body of the if --- you can't just leave it empty. We # can use the wildcard function here because these files should already # exist --- if they don't, then by definition the filename is wrong! @if $(TEST) ! -f content-checked; then \ $(foreach f,$(CONTENT_SRC),$(if $(wildcard $f),,$(error Content file $f referenced from $(SOURCE_XML) does not exist)) $(TRUE);) \ fi # Remake each individual content file. @if $(TEST) ! -f content-checked; then \ $(foreach f,$(CONTENT_SRC),if $(MAKE) -C $(dir $f) $(notdir $f) BUILD_DIR=$(CURDIR); then $(TRUE); else exit 1; fi;) \ fi # Create the marker file so that this rule doesn't get executed again. @if $(TEST) ! -f content-checked; then \ $(TOUCH) content-checked; \ fi endif ################################################################################ # # Install the appropriate files on the web server. This relies on the # environment variable HANDBOOK_INSTALL_ROOT being defined, and # (assuming that this variable points to a directory on the network) the # appropriate share has been mounted. # # This checks each file in the build directory against the corresponding # file in the install directory. The local file is only copied to the # install directory if it is newer, or the remote file doesn't exist. I # was going to do the "newer" testing using a target rule that dealt with # each file individually, but for some weird reason it would ignore any # additional files appended to the _INSTALL_FILES variables. So I've done # it with a foreach instead, which _does_ work. (Ick, although ironically # the code is shorter.) # # !!! How do we get it to also install any extra files that we require # for a particular content file (e.g., the SQL code for Tutorial 3)? !!! # install-questions: @$(TEST) -d $(HANDBOOK_INSTALL_ROOT) @$(MKDIR_P) $(INSTALL_DIRECTORY) @$(foreach f,$(QUESTION_INSTALL_FILES),if $(TEST) ! -f $(INSTALL_DIRECTORY)/$(f) -o $(f) -nt $(INSTALL_DIRECTORY)/$(f); then $(ECHO) "Installing $(f)"; $(CP) $(f) $(INSTALL_DIRECTORY); fi;) install-answers: @$(TEST) -d $(HANDBOOK_INSTALL_ROOT) @$(MKDIR_P) $(INSTALL_DIRECTORY) @$(foreach f,$(ANSWER_INSTALL_FILES),if $(TEST) ! -f $(INSTALL_DIRECTORY)/$(f) -o $(f) -nt $(INSTALL_DIRECTORY)/$(f); then $(ECHO) "Installing $(f)"; $(CP) $(f) $(INSTALL_DIRECTORY); fi;) ################################################################################ # # Clean up. # clean: web-clean print-clean ifneq ($(strip $(ALL_CLEAN_FILES)),) -$(RM) -f $(ALL_CLEAN_FILES) endif web-clean: ifneq ($(strip $(WEB_CLEAN_FILES)),) -$(RM) -f $(WEB_CLEAN_FILES) endif print-clean: ifneq ($(strip $(PRINT_CLEAN_FILES)),) -$(RM) -f $(PRINT_CLEAN_FILES) endif ################################################################################ # # Debugging information, mostly lists of the generated variables. # debug: @$(ANNOUNCE) Externally defined variables @$(ECHO) "TEACHING_SHARED = [$(TEACHING_SHARED)]" @$(ECHO) "ALL_PAPERS_ROOT = [$(ALL_PAPERS_ROOT)]" @$(ECHO) "HANDBOOK_INSTALL_ROOT = [$(HANDBOOK_INSTALL_ROOT)]" @$(ECHO) "NOINIT = [$(NOINIT)]" @$(ANNOUNCE) Internally defined variables @$(ECHO) "GLOBAL_HANDBOOK_INCLUDE = [$(GLOBAL_HANDBOOK_INCLUDE)]" @$(ECHO) "LOCAL_HANDBOOK_INCLUDE = [$(LOCAL_HANDBOOK_INCLUDE)]" @$(ECHO) "SUBJECT_CODE = [$(SUBJECT_CODE)]" @$(ECHO) "PAPER_NUMBER = [$(PAPER_NUMBER)]" @$(ECHO) "PAPER_YEAR = [$(PAPER_YEAR)]" @$(ECHO) "PAPER_PERIOD = [$(PAPER_PERIOD)]" @$(ECHO) "PAPER_ROOT = [$(PAPER_ROOT)]" @$(ECHO) "HANDBOOK_ROOT = [$(HANDBOOK_ROOT)]" @$(ECHO) "SECTION = [$(SECTION)]" @$(ECHO) "BASE_NAME = [$(BASE_NAME)]" @$(ECHO) "SOURCE_XML = [$(SOURCE_XML)]" @$(ECHO) "DERIVED_XML = [$(DERIVED_XML)]" @$(ECHO) "WEB_QUESTIONS_HTML = [$(WEB_QUESTIONS_HTML)]" @$(ECHO) "WEB_ANSWERS_HTML = [$(WEB_ANSWERS_HTML)]" @$(ECHO) "PRINT_QUESTIONS_TEX = [$(PRINT_QUESTIONS_TEX)]" @$(ECHO) "PRINT_ANSWERS_TEX = [$(PRINT_ANSWERS_TEX)]" @$(ECHO) "PRINT_QUESTIONS_PDF_1UP = [$(PRINT_QUESTIONS_PDF_1UP)]" @$(ECHO) "PRINT_ANSWERS_PDF_1UP = [$(PRINT_ANSWERS_PDF_1UP)]" @$(ECHO) "PRINT_QUESTIONS_PDF_2UP = [$(PRINT_QUESTIONS_PDF_2UP)]" @$(ECHO) "PRINT_ANSWERS_PDF_2UP = [$(PRINT_ANSWERS_PDF_2UP)]" @$(ECHO) "DERIVED_WEB_FILES = [$(DERIVED_WEB_FILES)]" @$(ECHO) "DERIVED_PRINT_FILES = [$(DERIVED_PRINT_FILES)]" @$(ECHO) "XSLT_STYLESHEETS = [$(XSLT_STYLESHEETS)]" @$(ECHO) "CONTENT_SRC = [$(CONTENT_SRC)]" @$(ECHO) "INSTALL_DIRECTORY = [$(INSTALL_DIRECTORY)]" @$(ECHO) "QUESTION_INSTALL_FILES = [$(QUESTION_INSTALL_FILES)]" @$(ECHO) "ANSWER_INSTALL_FILES = [$(ANSWER_INSTALL_FILES)]" @$(ECHO) "WEB_CLEAN_FILES = [$(WEB_CLEAN_FILES)]" @$(ECHO) "PRINT_CLEAN_FILES = [$(PRINT_CLEAN_FILES)]" @$(ECHO) "ALL_CLEAN_FILES = [$(ALL_CLEAN_FILES)]" ################################################################################ # # Print out the list of targets. Handy for when you forget! # targets: @$(ECHO) $(TARGETS)

Ignore Space Show notes View

make-includes/build_document_rules.make

################################################################################
#
# File: $Id$
#
# Standard variables and rules for building a particular document within a
# section of the handbook (e.g., a single tutorial). Altering these
# definitions will affect ALL DOCUMENT MAKEFILES FOR ALL PAPERS!! If you
# need to do something specific for a particular paper, include a custom
# rule in its makefile. DON'T add it here!
#
################################################################################

################################################################################
#
# Run one-time initialisation stuff, _unless_ NOINIT is defined. Any
# "parent" makefile that's already done the same one-time initialisation
# and calls this one should define NOINIT (the value doesn't matter) to
# switch off one-time initialisation in this makefile. Thus if the
# "parent" makefile calls this makefile several times, things like the
# content checking will only happen once for a single invocation of the
# "parent" makefile.
# 
# When running this makefile standalone, _don't_ define NOINIT, and
# everything will still work as expected.
#
ifndef NOINIT
include $(GLOBAL_HANDBOOK_INCLUDE)/remove_content_marker_files.make
endif

################################################################################
#
# Given that we print out our own messages, I see no point in splurging
# "Entering...leaving directory" messages all over the screen. It's hard
# enough to figure out what's going on already :)
#
MAKEFLAGS=--no-print-directory

################################################################################
#
# Include variables defining the current paper.
#
include $(LOCAL_HANDBOOK_INCLUDE)/paper_variables.make

################################################################################
#
# We make quite a lot of reference to files in the handbook directory,
# so set a variable to point to it. PAPER_ROOT is defined in the include
# file paper_variables.make.
#
HANDBOOK_ROOT:=$(PAPER_ROOT)/Handbook

################################################################################
#
# Include XSLT functions.
#
include $(GLOBAL_HANDBOOK_INCLUDE)/xslt_functions.make

################################################################################
#
# Defines which section we are currently building. This is actually the
# path to the main folder for the section. Normally this is passed in as
# an argument to make from a higher-level makefile (i.e., "make
# SECTION=path/to/section").
#
# Hmm, sh seems to convert uppercase letters in my paths to lowercase.
# I'm not sure whether this will break anything or not...
#
# I _can_ confirm that having spaces anywhere in the parent path causes
# serious breakage, because notdir returns bogus results in such cases.
# All of the make functions assume whitespace delimitation, and there
# doesn't seem to be any obvious way to work around this other than
# eliminating spaces from the parent path (quoting the result of the
# shell function below makes no difference). Fortunately, this is pretty
# easy to do :)
#
#
SECTION?=$(notdir $(shell cd ..; pwd))

################################################################################
#
# Set up the context for the current document.
#
# We use the same base name for both the directory and the document, which
# makes life very easy :)
#
BASE_NAME:=$(notdir $(CURDIR))

#
# SOURCE_XML is the original source XML, from which DERIVED_XML is
# generated (the derived source has the includes for questions, etc.,
# inserted).
#
SOURCE_XML:=$(BASE_NAME).xml
DERIVED_XML:=$(SOURCE_XML:.xml=-derived.xml)

#
# Define the names of the output files.
#
WEB_QUESTIONS_HTML:=$(BASE_NAME)-questions.html
WEB_ANSWERS_HTML:=$(BASE_NAME)-answers.html

PRINT_QUESTIONS_TEX:=$(WEB_QUESTIONS_HTML:.html=.tex)
PRINT_ANSWERS_TEX:=$(WEB_ANSWERS_HTML:.html=.tex)

PRINT_QUESTIONS_PDF_1UP:=$(PRINT_QUESTIONS_TEX:.tex=.pdf)
PRINT_ANSWERS_PDF_1UP:=$(PRINT_ANSWERS_TEX:.tex=.pdf)
PRINT_QUESTIONS_PDF_2UP:=$(PRINT_QUESTIONS_TEX:.tex=-2up.pdf)
PRINT_ANSWERS_PDF_2UP:=$(PRINT_ANSWERS_TEX:.tex=-2up.pdf)

#
# Groupings of various web- and print-related files, for easy reference.
# Feel free to add to these as necessary :)
#
DERIVED_WEB_FILES:=$(WEB_QUESTIONS_HTML) $(WEB_ANSWERS_HTML)
DERIVED_PRINT_FILES:=$(PRINT_QUESTIONS_TEX) $(PRINT_ANSWERS_TEX) \
	$(PRINT_QUESTIONS_PDF_1UP) $(PRINT_ANSWERS_PDF_1UP) \
	$(PRINT_QUESTIONS_PDF_2UP) $(PRINT_ANSWERS_PDF_2UP)

#
# List of XSL stylesheets. If any of these change, we need to rebuild
# everything. 
#
# We can't use the resolver approach under Windows because of the DOS
# pathnames. The style sheets come out of the resolver with paths like
# C:\bar\foo\..., and make interprets the colon as an extra dependency
# delimiter (tested and behaviour verified). Of course, this works fine on
# any platform with sensible path standards. Quoting the value doesn't
# help, unfortunately. Bugger :(
#
#XSLT_STYLESHEETS:=$(shell $(JAVA) org.apache.xml.resolver.apps.resolver -u file:///xml2html.xsl uri | ( $(GREP) 'Result: file:' || $(ECHO) '::xml2html.xsl' ) | $(CUT) -d':' -f3-) $(shell $(JAVA) org.apache.xml.resolver.apps.resolver -u file:///xml2latex.xsl uri | ( $(GREP) 'Result: file:' || $(ECHO) '::xml2latex.xsl' ) | $(CUT) -d':' -f3-)
XSLT_STYLESHEETS:=$(TEACHING_SHARED)/Authoring/XML/xml2html.xsl $(TEACHING_SHARED)/Authoring/XML/xml2xhtml.xsl $(TEACHING_SHARED)/Authoring/XML/xml2latex.xsl $(TEACHING_SHARED)/Authoring/XML/xml2xelatex.xsl

################################################################################
#
# Extract the list of included filenames from the source template. Hooray
# for the shell function and Perl! Include file paths are found within the
# href attributes of XML Include elements (<xi:include href="..." />).
# All paths are relative to $(PAPER_ROOT). We don't use
# $(PAPER_ROOT)/$(SECTION), because some of the include directories may be
# in relatively arbitrary locations.
#
CONTENT_SRC:=$(shell $(PERL) -ne 'print "$(PAPER_ROOT)/$$2\n" if m{<xi:include .*href="(\.\./)*([^"]+)"};' $(SOURCE_XML))

################################################################################
#
# Directory to install files into on web server.
#
INSTALL_DIRECTORY:=$(HANDBOOK_INSTALL_ROOT)/$(SUBJECT_CODE)$(PAPER_NUMBER)/Blackboard/$(SECTION)/$(BASE_NAME)

################################################################################
#
# Files to be installed on web server.
#
QUESTION_INSTALL_FILES:=$(WEB_QUESTIONS_HTML) $(PRINT_QUESTIONS_PDF_1UP) \
	$(PRINT_QUESTIONS_PDF_2UP) $(wildcard *.png)

ANSWER_INSTALL_FILES:=$(WEB_ANSWERS_HTML) $(PRINT_ANSWERS_PDF_1UP) \
	$(PRINT_ANSWERS_PDF_2UP)

################################################################################
#
# Lists of files for cleaning up. Add to these (using +=) as necessary in
# derived makefiles. Note that ALL_CLEAN_FILES comprises files that need
# to be deleted _in addition_ to those listed in WEB_CLEAN_FILES and
# PRINT_CLEAN_FILES (that is, it's the list of additional files for the
# "clean" target, which depends on "web-clean" and "print-clean" anyway).
#
WEB_CLEAN_FILES:=$(DERIVED_WEB_FILES) *-web*.png
PRINT_CLEAN_FILES:=$(DERIVED_PRINT_FILES) *-print*.png *.pdf
ALL_CLEAN_FILES:=$(DERIVED_XML)

################################################################################
#
# List of possible targets. If you need to add to this for a specific
# case, use TARGETS+=xxx in the actual makefile.
#
TARGETS:=all content targets debug install-questions install-answers \
	web web-questions web-answers \
	print print-questions print-answers \
	questions answers \
	clean web-clean print-clean

.PHONY: $(TARGETS)

################################################################################
#
# Build everything.
#
all: web print

################################################################################
#
# Build questions or answers only.
#
questions: web-questions print-questions

answers: web-answers print-answers

################################################################################
#
# Build web version only.
#
web: web-questions web-answers

web-questions: content $(WEB_QUESTIONS_HTML)

$(WEB_QUESTIONS_HTML): $(DERIVED_XML)
	@$(ANNOUNCE) "Building $@ from $<"
	$(call xslt,$<,xml2html.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,paper-period,'$(PAPER_PERIOD)'),$(call xslt_parameter,standalone,'no'),$(call xslt_parameter,showanswers,'no'),$(call xslt_parameter,base-path,'.'),$(call xslt_parameter,image-format,'png')) > $@

web-answers: content $(WEB_ANSWERS_HTML)

$(WEB_ANSWERS_HTML): $(DERIVED_XML)
	@$(ANNOUNCE) "Building $@ from $<"
	$(call xslt,$<,xml2html.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,paper-period,'$(PAPER_PERIOD)'),$(call xslt_parameter,standalone,'no'),$(call xslt_parameter,showanswers,'yes'),$(call xslt_parameter,base-path,'.'),$(call xslt_parameter,image-format,'png')) > $@

################################################################################
#
# Build print version only. We add code to the LaTeX source to mark the
# first and last pages of the document, so that an individual PDF for this
# document can be generated later. \markfirstpage and \marklastpage are
# macros defined in handbook_template.tex that write the current physical
# page number to the .aux file.
#
print: print-questions print-answers

print-questions: content $(PRINT_QUESTIONS_TEX)

$(PRINT_QUESTIONS_TEX): $(DERIVED_XML)
	@$(ANNOUNCE) "Building $@ from $<"
	@$(ECHO) "\\markfirstpage{$(SECTION)/$(BASE_NAME)/$(@:.tex=.pdf)}" > $@
	$(call xslt,$<,xml2latex.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,paper-period,'$(PAPER_PERIOD)'),$(call xslt_parameter,standalone,'no'),$(call xslt_parameter,showanswers,'no'),$(call xslt_parameter,base-path,'sections/$(SECTION)/$(BASE_NAME)'),$(call xslt_parameter,image-format,'pdf')) >> $@
	@$(ECHO) "\\marklastpage{$(SECTION)/$(BASE_NAME)/$(@:.tex=.pdf)}" >> $@

%-questions.pdf: %-questions.tex
	@$(ANNOUNCE) "Generating $@"
	@$(if $(wildcard $(HANDBOOK_ROOT)/handbook.pdf),,$(error $(HANDBOOK_ROOT)/handbook.pdf is missing))
	@gs -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=$@ \
		-dFirstPage=$(shell $(GREP) '$@.1up.first' $(HANDBOOK_ROOT)/handbook.aux | $(CUT) -d= -f2) \
		-dLastPage=$(shell $(GREP) '$@.1up.last' $(HANDBOOK_ROOT)/handbook.aux | $(CUT) -d= -f2) $(HANDBOOK_ROOT)/handbook.pdf

%-questions-2up.pdf: %-questions.tex
	@$(ANNOUNCE) "Generating $@"
	@$(if $(wildcard $(HANDBOOK_ROOT)/handbook-2up.pdf),,$(error $(HANDBOOK_ROOT)/handbook-2up.pdf is missing))
	@gs -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=$@ \
		-dFirstPage=$(shell $(GREP) '$(@:-2up.pdf=.pdf).2up.first' $(HANDBOOK_ROOT)/handbook.aux | $(CUT) -d= -f2) \
		-dLastPage=$(shell $(GREP) '$(@:-2up.pdf=.pdf).2up.last' $(HANDBOOK_ROOT)/handbook.aux | $(CUT) -d= -f2) $(HANDBOOK_ROOT)/handbook-2up.pdf

print-answers: content $(PRINT_ANSWERS_TEX)

$(PRINT_ANSWERS_TEX): $(DERIVED_XML)
	@$(ANNOUNCE) "Building $@ from $<"
	@$(ECHO) "\\markfirstpage{$(SECTION)/$(BASE_NAME)/$(@:.tex=.pdf)}" > $@
	$(call xslt,$<,xml2latex.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,paper-period,'$(PAPER_PERIOD)'),$(call xslt_parameter,standalone,'no'),$(call xslt_parameter,showanswers,'yes'),$(call xslt_parameter,base-path,'sections/$(SECTION)/$(BASE_NAME)'),$(call xslt_parameter,image-format,'pdf')) >> $@
	@$(ECHO) "\\marklastpage{$(SECTION)/$(BASE_NAME)/$(@:.tex=.pdf)}" >> $@

%-answers.pdf: %-answers.tex
	@$(ANNOUNCE) "Generating $@"
	@$(if $(wildcard $(HANDBOOK_ROOT)/handbook-answers.pdf),,$(error $(HANDBOOK_ROOT)/handbook-answers.pdf is missing))
	@gs -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=$@ \
		-dFirstPage=$(shell $(GREP) '$@.1up.first' $(HANDBOOK_ROOT)/handbook-answers.aux | $(CUT) -d= -f2) \
		-dLastPage=$(shell $(GREP) '$@.1up.last' $(HANDBOOK_ROOT)/handbook-answers.aux | $(CUT) -d= -f2) $(HANDBOOK_ROOT)/handbook-answers.pdf

%-answers-2up.pdf: %-answers.tex
	@$(ANNOUNCE) "Generating $@"
	@$(if $(wildcard $(HANDBOOK_ROOT)/handbook-answers-2up.pdf),,$(error $(HANDBOOK_ROOT)/handbook-answers-2up.pdf is missing))
	@gs -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=$@ \
		-dFirstPage=$(shell $(GREP) '$(@:-2up.pdf=.pdf).2up.first' $(HANDBOOK_ROOT)/handbook-answers.aux | $(CUT) -d= -f2) \
		-dLastPage=$(shell $(GREP) '$(@:-2up.pdf=.pdf).2up.last' $(HANDBOOK_ROOT)/handbook-answers.aux | $(CUT) -d= -f2) $(HANDBOOK_ROOT)/handbook-answers-2up.pdf

################################################################################
#
# Generate the derived XML source from the original XML template.
# This is done by simply running the original source through xmllint
# with the --xinclude option to process all the xi:include elements.
# The result of this could have just been piped into the XSLT processor,
# except that (a) not all of the processors support input from stdin,
# and (b) combining both xmllint and XSLT processing into one command
# means that make won't stop if there's any errors from xmllint.
#
# Sed is used to add a comment to the derived XML file, warning that this
# is generated and shouldn't be edited. Sed was used because the <?xml?>
# processing instruction MUST be on the first line. The implication here
# is that all input source files have an <?xml?> processing instruction
# (which they should anyway).
#
$(DERIVED_XML): $(SOURCE_XML) $(XSLT_STYLESHEETS)
	@$(ANNOUNCE) "Generating $@"
	@$(XMLLINT) --xinclude $< >$@
	@$(SED) -i -e '1a ' $@

################################################################################
#
# If any of the content files change, touch the XML template to
# ensure that the document gets fully rebuilt.
#
$(SOURCE_XML): $(CONTENT_SRC)
	@$(TOUCH) $@

################################################################################
#
# Build the individual content files, etc., as necessary. Note above that
# all the primary targets depend on the "content" target, _before_
# anything else. This ensures that the content gets rebuilt (if necessary)
# before anything else happens.
# 
# This may seem redundant, given that SOURCE_XML depends on CONTENT_SRC in
# the rule above. However, this rule only works if we change one of the
# actual content files. What if instead, we change a graphic associated
# with one of the content files, without changing the content file itself?
# In this case, make assumes that nothing needs to be done, because the
# content file is older than the target, and this makefile knows nothing
# about any dependencies that the content file might have (that's dealt
# with by the makefile in the appropriate content directory). This is the
# main downside of having independent makefiles.
# 
# So, the slightly convoluted workaround using the empty "content" target
# ensures that the content files will always be checked, regardless of
# whether they've changed. If any of their prerequisites for a particular
# content file change, then the content file itself will be touched, thus
# activating the SOURCE_XML rule above. This process is particularly
# important to ensure that associated graphics get rebuilt when they
# change.
#
# All that aside, however, the _real_ trick is to ensure that this rule is
# only executed once. If we do a "make", this rule would nominally get
# executed four times (once for each of the targets that depend on
# "content"). The first time through the rule, therefore, we create a
# marker file called "content-checked". If this file exists, the rule
# isn't executed. These marker files are cleaned up by a one-off find
# command when the makefile is first run (see the include file
# one-time-init.make).
#
# Note: using the wildcard function to test for the existence of the
# marker file doesn't work when the makefile is run standalone, because
# the function result is expanded at the time the makefile is _loaded_,
# _before_ the one-time initialisation has a change to kick in and delete
# the file. This has the rather bizarre side-effect of the makefile only
# re-checking the content on every second run, and means that we can't use
# make conditionals to control rule execution. The solution is to prefix
# every command in the rule with "test ! -f" to check whether the marker
# file exists.
#
# Ack! The tribulations of not using a monolithic makefile...
#
content:
# Of course, there's little point in doing anything if there's no content!
ifneq ($(strip $(CONTENT_SRC)),)
	@if $(TEST) ! -f content-checked; then \
		$(ANNOUNCE) "Checking content for $(BASE_NAME)"; \
	fi
# Sanity check: do the content files referenced from the original source
# actually exist? The "$(TRUE)" is included because there needs to
# be something in the body of the if --- you can't just leave it empty. We
# can use the wildcard function here because these files should already
# exist --- if they don't, then by definition the filename is wrong!
	@if $(TEST) ! -f content-checked; then \
		$(foreach f,$(CONTENT_SRC),$(if $(wildcard $f),,$(error Content file $f referenced from $(SOURCE_XML) does not exist)) $(TRUE);) \
	fi
# Remake each individual content file.
	@if $(TEST) ! -f content-checked; then \
		$(foreach f,$(CONTENT_SRC),if $(MAKE) -C $(dir $f) $(notdir $f) BUILD_DIR=$(CURDIR); then $(TRUE); else exit 1; fi;) \
	fi
# Create the marker file so that this rule doesn't get executed again.
	@if $(TEST) ! -f content-checked; then \
		$(TOUCH) content-checked; \
	fi
endif

################################################################################
#
# Link the appropriate files to the deployment directory. This relies on the
# environment variable HANDBOOK_INSTALL_DIRECTORY being defined, and
# and that it points to a valid directory.
#
# This checks each file in the build directory against the corresponding
# file in the install directory. The local file is only copied to the
# install directory if it is newer, or the remote file doesn't exist. I
# was going to do the "newer" testing using a target rule that dealt with
# each file individually, but for some weird reason it would ignore any
# additional files appended to the *_INSTALL_FILES variables. So I've done
# it with a foreach instead, which _does_ work. (Ick, although ironically
# the code is shorter.)
#
# !!! How do we get it to also install any extra files that we require
# for a particular content file (e.g., the SQL code for Tutorial 3)? !!!
#
install-questions:
	@$(TEST) -d $(HANDBOOK_INSTALL_ROOT)
	@$(MKDIR_P) $(INSTALL_DIRECTORY)
	@$(foreach f,$(QUESTION_INSTALL_FILES),if $(TEST) ! -f $(INSTALL_DIRECTORY)/$(f) -o $(CURDIR)/$(f) -nt $(INSTALL_DIRECTORY)/$(f); then $(ECHO) "Linking $(f)"; $(LN_S) $(CURDIR)/$(f) $(INSTALL_DIRECTORY); fi;)

install-answers:
	@$(TEST) -d $(HANDBOOK_INSTALL_ROOT)
	@$(MKDIR_P) $(INSTALL_DIRECTORY)
	@$(foreach f,$(ANSWER_INSTALL_FILES),if $(TEST) ! -f $(INSTALL_DIRECTORY)/$(f) -o $(CURDIR)/$(f) -nt $(INSTALL_DIRECTORY)/$(f); then $(ECHO) "Linking $(f)"; $(LN_S) $(CURDIR)/$(f) $(INSTALL_DIRECTORY); fi;)

################################################################################
#
# Clean up.
#
clean: web-clean print-clean
ifneq ($(strip $(ALL_CLEAN_FILES)),)
	-$(RM) -f $(ALL_CLEAN_FILES)
endif

web-clean:
ifneq ($(strip $(WEB_CLEAN_FILES)),)
	-$(RM) -f $(WEB_CLEAN_FILES)
endif

print-clean:
ifneq ($(strip $(PRINT_CLEAN_FILES)),)
	-$(RM) -f $(PRINT_CLEAN_FILES)
endif

################################################################################
#
# Debugging information, mostly lists of the generated variables.
#
debug:
	@$(ANNOUNCE) Externally defined variables
	@$(ECHO) "TEACHING_SHARED = [$(TEACHING_SHARED)]"
	@$(ECHO) "ALL_PAPERS_ROOT = [$(ALL_PAPERS_ROOT)]"
	@$(ECHO) "HANDBOOK_INSTALL_ROOT = [$(HANDBOOK_INSTALL_ROOT)]"
	@$(ECHO) "NOINIT = [$(NOINIT)]"
	@$(ANNOUNCE) Internally defined variables
	@$(ECHO) "GLOBAL_HANDBOOK_INCLUDE = [$(GLOBAL_HANDBOOK_INCLUDE)]"
	@$(ECHO) "LOCAL_HANDBOOK_INCLUDE = [$(LOCAL_HANDBOOK_INCLUDE)]"
	@$(ECHO) "SUBJECT_CODE = [$(SUBJECT_CODE)]"
	@$(ECHO) "PAPER_NUMBER = [$(PAPER_NUMBER)]"
	@$(ECHO) "PAPER_YEAR = [$(PAPER_YEAR)]"
	@$(ECHO) "PAPER_PERIOD = [$(PAPER_PERIOD)]"
	@$(ECHO) "PAPER_ROOT = [$(PAPER_ROOT)]"
	@$(ECHO) "HANDBOOK_ROOT = [$(HANDBOOK_ROOT)]"
	@$(ECHO) "SECTION = [$(SECTION)]"
	@$(ECHO) "BASE_NAME = [$(BASE_NAME)]"
	@$(ECHO) "SOURCE_XML = [$(SOURCE_XML)]"
	@$(ECHO) "DERIVED_XML = [$(DERIVED_XML)]"
	@$(ECHO) "WEB_QUESTIONS_HTML = [$(WEB_QUESTIONS_HTML)]"
	@$(ECHO) "WEB_ANSWERS_HTML = [$(WEB_ANSWERS_HTML)]"
	@$(ECHO) "PRINT_QUESTIONS_TEX = [$(PRINT_QUESTIONS_TEX)]"
	@$(ECHO) "PRINT_ANSWERS_TEX = [$(PRINT_ANSWERS_TEX)]"
	@$(ECHO) "PRINT_QUESTIONS_PDF_1UP = [$(PRINT_QUESTIONS_PDF_1UP)]"
	@$(ECHO) "PRINT_ANSWERS_PDF_1UP = [$(PRINT_ANSWERS_PDF_1UP)]"
	@$(ECHO) "PRINT_QUESTIONS_PDF_2UP = [$(PRINT_QUESTIONS_PDF_2UP)]"
	@$(ECHO) "PRINT_ANSWERS_PDF_2UP = [$(PRINT_ANSWERS_PDF_2UP)]"
	@$(ECHO) "DERIVED_WEB_FILES = [$(DERIVED_WEB_FILES)]"
	@$(ECHO) "DERIVED_PRINT_FILES = [$(DERIVED_PRINT_FILES)]"
	@$(ECHO) "XSLT_STYLESHEETS = [$(XSLT_STYLESHEETS)]"
	@$(ECHO) "CONTENT_SRC = [$(CONTENT_SRC)]"
	@$(ECHO) "INSTALL_DIRECTORY = [$(INSTALL_DIRECTORY)]"
	@$(ECHO) "QUESTION_INSTALL_FILES = [$(QUESTION_INSTALL_FILES)]"
	@$(ECHO) "ANSWER_INSTALL_FILES = [$(ANSWER_INSTALL_FILES)]"
	@$(ECHO) "WEB_CLEAN_FILES = [$(WEB_CLEAN_FILES)]"
	@$(ECHO) "PRINT_CLEAN_FILES = [$(PRINT_CLEAN_FILES)]"
	@$(ECHO) "ALL_CLEAN_FILES = [$(ALL_CLEAN_FILES)]"

################################################################################
#
# Print out the list of targets. Handy for when you forget!
#
targets:
	@$(ECHO) $(TARGETS)

################################################################################
#
# Include variables defining the current paper.
#
include $(LOCAL_HANDBOOK_INCLUDE)/paper_variables.make

################################################################################
#
# Include XSLT functions.
#
include $(GLOBAL_HANDBOOK_INCLUDE)/xslt_functions.make

#
# Define the names of the output files.
#
WEB_QUESTIONS_HTML:=$(BASE_NAME)-questions.html
WEB_ANSWERS_HTML:=$(BASE_NAME)-answers.html

PRINT_QUESTIONS_TEX:=$(WEB_QUESTIONS_HTML:.html=.tex)
PRINT_ANSWERS_TEX:=$(WEB_ANSWERS_HTML:.html=.tex)

ANSWER_INSTALL_FILES:=$(WEB_ANSWERS_HTML) $(PRINT_ANSWERS_PDF_1UP) \
	$(PRINT_ANSWERS_PDF_2UP)

.PHONY: $(TARGETS)

################################################################################
#
# Build everything.
#
all: web print

################################################################################
#
# Build questions or answers only.
#
questions: web-questions print-questions

answers: web-answers print-answers

################################################################################
#
# Build web version only.
#
web: web-questions web-answers

web-questions: content $(WEB_QUESTIONS_HTML)

web-answers: content $(WEB_ANSWERS_HTML)

print-questions: content $(PRINT_QUESTIONS_TEX)

print-answers: content $(PRINT_ANSWERS_TEX)

################################################################################
#
# Install the appropriate files on the web server. This relies on the
# environment variable HANDBOOK_INSTALL_ROOT being defined, and
# (assuming that this variable points to a directory on the network) the
# appropriate share has been mounted.
#
# This checks each file in the build directory against the corresponding
# file in the install directory. The local file is only copied to the
# install directory if it is newer, or the remote file doesn't exist. I
# was going to do the "newer" testing using a target rule that dealt with
# each file individually, but for some weird reason it would ignore any
# additional files appended to the *_INSTALL_FILES variables. So I've done
# it with a foreach instead, which _does_ work. (Ick, although ironically
# the code is shorter.)
#
# !!! How do we get it to also install any extra files that we require
# for a particular content file (e.g., the SQL code for Tutorial 3)? !!!
#
install-questions:
	@$(TEST) -d $(HANDBOOK_INSTALL_ROOT)
	@$(MKDIR_P) $(INSTALL_DIRECTORY)
	@$(foreach f,$(QUESTION_INSTALL_FILES),if $(TEST) ! -f $(INSTALL_DIRECTORY)/$(f) -o $(f) -nt $(INSTALL_DIRECTORY)/$(f); then $(ECHO) "Installing $(f)"; $(CP) $(f) $(INSTALL_DIRECTORY); fi;)

install-answers:
	@$(TEST) -d $(HANDBOOK_INSTALL_ROOT)
	@$(MKDIR_P) $(INSTALL_DIRECTORY)
	@$(foreach f,$(ANSWER_INSTALL_FILES),if $(TEST) ! -f $(INSTALL_DIRECTORY)/$(f) -o $(f) -nt $(INSTALL_DIRECTORY)/$(f); then $(ECHO) "Installing $(f)"; $(CP) $(f) $(INSTALL_DIRECTORY); fi;)

################################################################################
#
# Clean up.
#
clean: web-clean print-clean
ifneq ($(strip $(ALL_CLEAN_FILES)),)
	-$(RM) -f $(ALL_CLEAN_FILES)
endif

web-clean:
ifneq ($(strip $(WEB_CLEAN_FILES)),)
	-$(RM) -f $(WEB_CLEAN_FILES)
endif

print-clean:
ifneq ($(strip $(PRINT_CLEAN_FILES)),)
	-$(RM) -f $(PRINT_CLEAN_FILES)
endif

################################################################################
#
# Print out the list of targets. Handy for when you forget!
#
targets:
	@$(ECHO) $(TARGETS)

Ignore Space Show notes View make-includes/build_lecture_rules.make
################################################################################ # # File: $Id$ # # Standard variables and rules for building a set of lecture files. # Altering these definitions will affect ALL LECTURE MAKEFILES FOR ALL # PAPERS!! If you need to do something specific for a particular paper, # include a custom rule in its makefile. DON'T add it here! # ################################################################################ ################################################################################ # # Add standard file suffixes. # include $(GLOBAL_HANDBOOK_INCLUDE)/standard_suffixes.make ################################################################################ # # Standard directories. # IMGDIR=images ################################################################################ # # Standard paths. # include $(GLOBAL_HANDBOOK_INCLUDE)/standard_paths.make ################################################################################ # # Files to be cleaned by the various "clean" targets. Note that we don't # "tidy" .aux files because they may be needed by the xr package for inter- # document cross references, but won't get regenerated if the final target # PDF files exist. They will be caught by by the "clean" target though. # TIDY_FILES+=.tmp .out .log .nav .toc .snm .head .dvi \ slides-combined.pdf slides-notes.pdf CLEAN_FILES+=.aux .pdf ################################################################################ # # Various environment variables. # include $(GLOBAL_HANDBOOK_INCLUDE)/standard_environment.make # # Base file names for the various documents. # SLIDES?=Chapter$(CHAPTER)slides FIGURES?=Chapter$(CHAPTER)figures COMBINED?=Chapter$(CHAPTER)combined NOTES?=Chapter$(CHAPTER)notes # # Standard files to be installed on the web server. # ifneq ($(strip $(SLIDES)),) INSTALL_FILES+=$(SLIDES).pdf endif ifneq ($(strip $(FIGURES)),) INSTALL_FILES+=$(FIGURES).pdf $(FIGURES)-reduced.pdf endif ifneq ($(strip $(COMBINED)),) INSTALL_FILES+=$(COMBINED).pdf endif # # List of standard "phony" build targets. # TARGETS+=slides notes slides-combined slides-notes figures figures2up combined # .PHONY: $(TARGETS) ################################################################################ # # Display a message if someone tries to build a target that has been # disabled (by setting the appropriate variable to empty in the makefile). # disabled_message=@$(ECHO) The \"$(1)\" target has been disabled for this chapter. ################################################################################ # # Build everything. # all: slides notes figures figures2up combined ################################################################################ # # Build presentation slides. If $(SLIDES) is empty, these rules are ignored. # ifneq ($(strip $(SLIDES)),) # # Set the prerequisites for the "slides" build target, depending on # whether the figures document exists. If $(FIGURES) is non-empty, we need # to include the figures .aux file for inter-document cross-references. # ifeq ($(strip $(FIGURES)),) SLIDES_PREREQS:=$(SLIDES).pdf else SLIDES_PREREQS:=figures $(SLIDES).pdf endif # # Build the slides for the presentation. # slides: $(SLIDES_PREREQS) $(SLIDES).pdf: $(SLIDES).tex $(SLIDE_IMAGES) $(SLIDE_BACKGROUNDS) $(SLIDE_FILES) $(PDFLATEX) --jobname=$(SLIDES) '\documentclass[$(LATEX_OPTS)]{lectureslides}\input{$(SLIDES)}' $(PDFLATEX) --jobname=$(SLIDES) '\documentclass[$(LATEX_OPTS)]{lectureslides}\input{$(SLIDES)}' else slides: $(call disabled_message,$@) endif ################################################################################ # # Build the presentation notes. If $(NOTES) is empty, these rules are # ignored. # ifneq ($(strip $(NOTES)),) # # Build the slides with notes. # slides-notes: slides-notes.pdf slides-notes.pdf: $(SLIDES).tex $(SLIDE_IMAGES) $(SLIDE_BACKGROUNDS) $(SLIDE_FILES) $(PDFLATEX) --jobname=slides-notes '\documentclass[$(LATEX_OPTS),notes=onlyslideswithnotes]{lectureslides}\input{$(SLIDES)}' $(PDFLATEX) --jobname=slides-notes '\documentclass[$(LATEX_OPTS),notes=onlyslideswithnotes]{lectureslides}\input{$(SLIDES)}' # # Build the slides with notes, 6-up. # notes: $(NOTES).pdf $(NOTES).pdf: $(NOTES).tex slides-notes.pdf $(PDFLATEX) $< $(PDFLATEX) $< else notes slides-notes: $(call disabled_message,$@) endif ################################################################################ # # Build the complete combined lecture document. If $(COMBINED) is empty, # these rules are ignored. # ifneq ($(strip $(COMBINED)),) # # Set the prerequisites for the "combined" build target, depending on # whether the figures document exists. If $(FIGURES) is empty, they are # omitted from the combined document. # ifeq ($(strip $(FIGURES)),) COMBINED_PREREQS:=$(COMBINED).tex slides-combined.pdf else COMBINED_PREREQS:=$(COMBINED).tex slides-combined.pdf $(FIGURES).pdf endif # # Build the slides for the combined document. # slides-combined: slides-combined.pdf slides-combined.pdf: $(SLIDES).tex $(SLIDE_IMAGES) $(SLIDE_BACKGROUNDS) $(PDFLATEX) --jobname=slides-combined '\documentclass[$(LATEX_OPTS),handout]{lectureslides}\input{$(SLIDES)}' $(PDFLATEX) --jobname=slides-combined '\documentclass[$(LATEX_OPTS),handout]{lectureslides}\input{$(SLIDES)}' # # Build the complete combined document. # combined: $(COMBINED).pdf $(COMBINED).pdf: $(COMBINED_PREREQS) $(COMBI_IMAGES) $(COMBI_FILES) $(PDFLATEX) $< $(PDFLATEX) $< else combined slides-combined: $(call disabled_message,$@) endif ################################################################################ # # Build the figures and examples document. If $(FIGURES) is empty, these # rules are ignored. # ifneq ($(strip $(FIGURES)),) figures: $(FIGURES).pdf $(FIGURES).pdf: $(FIGURES).tex $(FIG_IMAGES) $(FIG_FILES) $(PDFLATEX) $< $(PDFLATEX) $< figures2up: $(FIGURES)-reduced.pdf $(FIGURES)-reduced.pdf: $(FIGURES).pdf $(PDFNUP) $< --nup 2x1 --outfile $@ else figures figures2up: $(call disabled_message,$@) endif ################################################################################ # # Build the test document. # test: test.pdf test.pdf: test.tex ################################################################################ # # Link the appropriate files to the deployment directory, then synchronise this # with Blackboard. This relies on the environment variable HANDBOOK_INSTALL_ROOT # being defined, and that it points to a valid directory. Note that all existing # symbolic links in the entire lectures deployment tree are deleted first. # # See build_document_rules.make for an explanation of why the install # uses a foreach. # # Note that this won't do anything clever if you give it files that are # in subdirectories of the current directory. Everything will be flattened # at the other end. That is, something like "images/foo.pdf" will go into # the installation directory as "foo.pdf", not "images/foo.pdf". # install: @$(ANNOUNCE) "Building deployment links" @$(TEST) -d $(HANDBOOK_INSTALL_ROOT) @$(MKDIR_P) $(INSTALL_DIRECTORY) @$(FIND) $(INSTALL_DIRECTORY) -type l -delete @$(foreach f,$(INSTALL_FILES),if $(TEST) ! -f $(INSTALL_DIRECTORY)/$(f) -o $(CURDIR)/$(f) -nt $(INSTALL_DIRECTORY)/$(f); then $(ECHO) "Linking $(f)"; $(LN_S) $(CURDIR)/$(f) $(INSTALL_DIRECTORY); fi;) @$(ANNOUNCE) "Synchronising with Blackboard" @$(SITECOPY) --update Blackboard$(PAPER_NUMBER) ################################################################################ # # Debugging: print the values of the standard variables. # debug: @$(ANNOUNCE) Externally defined variables @$(ECHO) "TEACHING_SHARED = [$(TEACHING_SHARED)]" @$(ECHO) "HANDBOOK_INSTALL_ROOT = [$(HANDBOOK_INSTALL_ROOT)]" @$(ECHO) "CHAPTER = [$(CHAPTER)]" @$(ANNOUNCE) Internally defined variables @$(ECHO) "SUBJECT_CODE = [$(SUBJECT_CODE)]" @$(ECHO) "PAPER_NUMBER = [$(PAPER_NUMBER)]" @$(ECHO) "GLOBAL_HANDBOOK_INCLUDE = [$(GLOBAL_HANDBOOK_INCLUDE)]" @$(ECHO) "INSTALL_DIRECTORY = [$(INSTALL_DIRECTORY)]" @$(ECHO) "INSTALL_FILES = [$(INSTALL_FILES)]" @$(ECHO) "SLIDE_IMAGES = [$(SLIDE_IMAGES)]" @$(ECHO) "SLIDE_BACKGROUNDS = [$(SLIDE_BACKGROUNDS)]" @$(ECHO) "SLIDE_FILES = [$(SLIDE_FILES)]" @$(ECHO) "FIG_IMAGES = [$(FIG_IMAGES)]" @$(ECHO) "FIG_FILES = [$(FIG_FILES)]" @$(ECHO) "TIDY_FILES = [$(TIDY_FILES)]" @$(ECHO) "CLEAN_FILES = [$(CLEAN_FILES)]" @$(ECHO) "DRAFT = [$(DRAFT)]" @$(ECHO) "LATEX_OPTS = [$(LATEX_OPTS)]" @$(ECHO) "SLIDES = [$(SLIDES)]" @$(ECHO) "FIGURES = [$(FIGURES)]" @$(ECHO) "COMBINED = [$(COMBINED)]" @$(ECHO) "NOTES = [$(NOTES)]" @$(ECHO) "SLIDES_PREREQS = [$(SLIDES_PREREQS)]" @$(ECHO) "COMBINED_PREREQS = [$(COMBINED_PREREQS)]" @$(ECHO) "TARGETS = [$(TARGETS)]" ################################################################################ # # Clean up: get rid of all the temporary files. # tidy: $(RM) -f $(TIDY_FILES) # # Clean up: get rid of everything except the original source. # clean: tidy $(RM) -f $(CLEAN_FILES) ################################################################################ # # List all "phony" build targets. # targets: @$(ECHO) "targets: $(TARGETS)" ################################################################################ # # Standard default rules. # include $(GLOBAL_HANDBOOK_INCLUDE)/standard_rules.make ################################################################################ # # File: $Id$ # # Standard variables and rules for building a set of lecture files. # Altering these definitions will affect ALL LECTURE MAKEFILES FOR ALL # PAPERS!! If you need to do something specific for a particular paper, # include a custom rule in its makefile. DON'T add it here! # ################################################################################ ################################################################################ # # Add standard file suffixes. # include $(GLOBAL_HANDBOOK_INCLUDE)/standard_suffixes.make ################################################################################ # # Standard directories. # IMGDIR=images ################################################################################ # # Standard paths. # include $(GLOBAL_HANDBOOK_INCLUDE)/standard_paths.make ################################################################################ # # Files to be cleaned by the various "clean" targets. Note that we don't # "tidy" .aux files because they may be needed by the xr package for inter- # document cross references, but won't get regenerated if the final target # PDF files exist. They will be caught by by the "clean" target though. # TIDY_FILES+=.tmp .out .log .nav .toc .snm .head .dvi \ slides-combined.pdf slides-notes.pdf CLEAN_FILES+=.aux .pdf ################################################################################ # # Various environment variables. # include $(GLOBAL_HANDBOOK_INCLUDE)/standard_environment.make # # Base file names for the various documents. # SLIDES?=Chapter$(CHAPTER)slides FIGURES?=Chapter$(CHAPTER)figures COMBINED?=Chapter$(CHAPTER)combined NOTES?=Chapter$(CHAPTER)notes # # Standard files to be installed on the web server. # ifneq ($(strip $(SLIDES)),) INSTALL_FILES+=$(SLIDES).pdf endif ifneq ($(strip $(FIGURES)),) INSTALL_FILES+=$(FIGURES).pdf $(FIGURES)-reduced.pdf endif ifneq ($(strip $(COMBINED)),) INSTALL_FILES+=$(COMBINED).pdf endif # # List of standard "phony" build targets. # TARGETS+=slides notes slides-combined slides-notes figures figures2up combined # .PHONY: $(TARGETS) ################################################################################ # # Display a message if someone tries to build a target that has been # disabled (by setting the appropriate variable to empty in the makefile). # disabled_message=@$(ECHO) The \"$(1)\" target has been disabled for this chapter. ################################################################################ # # Build everything. # all: slides notes figures figures2up combined ################################################################################ # # Build presentation slides. If $(SLIDES) is empty, these rules are ignored. # ifneq ($(strip $(SLIDES)),) # # Set the prerequisites for the "slides" build target, depending on # whether the figures document exists. If $(FIGURES) is non-empty, we need # to include the figures .aux file for inter-document cross-references. # ifeq ($(strip $(FIGURES)),) SLIDES_PREREQS:=$(SLIDES).pdf else SLIDES_PREREQS:=figures $(SLIDES).pdf endif # # Build the slides for the presentation. # slides: $(SLIDES_PREREQS) $(SLIDES).pdf: $(SLIDES).tex $(SLIDE_IMAGES) $(SLIDE_BACKGROUNDS) $(SLIDE_FILES) $(PDFLATEX) --jobname=$(SLIDES) '\documentclass[$(LATEX_OPTS)]{lectureslides}\input{$(SLIDES)}' $(PDFLATEX) --jobname=$(SLIDES) '\documentclass[$(LATEX_OPTS)]{lectureslides}\input{$(SLIDES)}' else slides: $(call disabled_message,$@) endif ################################################################################ # # Build the presentation notes. If $(NOTES) is empty, these rules are # ignored. # ifneq ($(strip $(NOTES)),) # # Build the slides with notes. # slides-notes: slides-notes.pdf slides-notes.pdf: $(SLIDES).tex $(SLIDE_IMAGES) $(SLIDE_BACKGROUNDS) $(SLIDE_FILES) $(PDFLATEX) --jobname=slides-notes '\documentclass[$(LATEX_OPTS),notes=onlyslideswithnotes]{lectureslides}\input{$(SLIDES)}' $(PDFLATEX) --jobname=slides-notes '\documentclass[$(LATEX_OPTS),notes=onlyslideswithnotes]{lectureslides}\input{$(SLIDES)}' # # Build the slides with notes, 6-up. # notes: $(NOTES).pdf $(NOTES).pdf: $(NOTES).tex slides-notes.pdf $(PDFLATEX) $< $(PDFLATEX) $< else notes slides-notes: $(call disabled_message,$@) endif ################################################################################ # # Build the complete combined lecture document. If $(COMBINED) is empty, # these rules are ignored. # ifneq ($(strip $(COMBINED)),) # # Set the prerequisites for the "combined" build target, depending on # whether the figures document exists. If $(FIGURES) is empty, they are # omitted from the combined document. # ifeq ($(strip $(FIGURES)),) COMBINED_PREREQS:=$(COMBINED).tex slides-combined.pdf else COMBINED_PREREQS:=$(COMBINED).tex slides-combined.pdf $(FIGURES).pdf endif # # Build the slides for the combined document. # slides-combined: slides-combined.pdf slides-combined.pdf: $(SLIDES).tex $(SLIDE_IMAGES) $(SLIDE_BACKGROUNDS) $(PDFLATEX) --jobname=slides-combined '\documentclass[$(LATEX_OPTS),handout]{lectureslides}\input{$(SLIDES)}' $(PDFLATEX) --jobname=slides-combined '\documentclass[$(LATEX_OPTS),handout]{lectureslides}\input{$(SLIDES)}' # # Build the complete combined document. # combined: $(COMBINED).pdf $(COMBINED).pdf: $(COMBINED_PREREQS) $(COMBI_IMAGES) $(COMBI_FILES) $(PDFLATEX) $< $(PDFLATEX) $< else combined slides-combined: $(call disabled_message,$@) endif ################################################################################ # # Build the figures and examples document. If $(FIGURES) is empty, these # rules are ignored. # ifneq ($(strip $(FIGURES)),) figures: $(FIGURES).pdf $(FIGURES).pdf: $(FIGURES).tex $(FIG_IMAGES) $(FIG_FILES) $(PDFLATEX) $< $(PDFLATEX) $< figures2up: $(FIGURES)-reduced.pdf $(FIGURES)-reduced.pdf: $(FIGURES).pdf $(PDFNUP) $< --nup 2x1 --outfile $@ else figures figures2up: $(call disabled_message,$@) endif ################################################################################ # # Build the test document. # test: test.pdf test.pdf: test.tex ################################################################################ # # Install the appropriate files on the web server. This relies on the # environment variable HANDBOOK_INSTALL_ROOT being defined, and # (assuming that this variable points to a directory on the network) the # appropriate share has been mounted. # # See build_document_rules.make for an explanation of why the install # uses a foreach. # # Note that this won't do anything clever if you give it files that are # in subdirectories of the current directory. Everything will be flattened # at the other end. That is, something like "images/foo.pdf" will go into # the installation directory as "foo.pdf", not "images/foo.pdf". # install: @$(ANNOUNCE) "Copying files to web server --- make sure that you have the share mounted!" @$(TEST) -d $(HANDBOOK_INSTALL_ROOT) @$(MKDIR_P) $(INSTALL_DIRECTORY) @$(foreach f,$(INSTALL_FILES),if $(TEST) ! -f $(INSTALL_DIRECTORY)/$(f) -o $(f) -nt $(INSTALL_DIRECTORY)/$(f); then $(ECHO) "Installing $(f)"; $(CP) $(f) $(INSTALL_DIRECTORY); fi;) ################################################################################ # # Debugging: print the values of the standard variables. # debug: @$(ANNOUNCE) Externally defined variables @$(ECHO) "TEACHING_SHARED = [$(TEACHING_SHARED)]" @$(ECHO) "HANDBOOK_INSTALL_ROOT = [$(HANDBOOK_INSTALL_ROOT)]" @$(ECHO) "CHAPTER = [$(CHAPTER)]" @$(ANNOUNCE) Internally defined variables @$(ECHO) "SUBJECT_CODE = [$(SUBJECT_CODE)]" @$(ECHO) "PAPER_NUMBER = [$(PAPER_NUMBER)]" @$(ECHO) "GLOBAL_HANDBOOK_INCLUDE = [$(GLOBAL_HANDBOOK_INCLUDE)]" @$(ECHO) "INSTALL_DIRECTORY = [$(INSTALL_DIRECTORY)]" @$(ECHO) "INSTALL_FILES = [$(INSTALL_FILES)]" @$(ECHO) "SLIDE_IMAGES = [$(SLIDE_IMAGES)]" @$(ECHO) "SLIDE_BACKGROUNDS = [$(SLIDE_BACKGROUNDS)]" @$(ECHO) "SLIDE_FILES = [$(SLIDE_FILES)]" @$(ECHO) "FIG_IMAGES = [$(FIG_IMAGES)]" @$(ECHO) "FIG_FILES = [$(FIG_FILES)]" @$(ECHO) "TIDY_FILES = [$(TIDY_FILES)]" @$(ECHO) "CLEAN_FILES = [$(CLEAN_FILES)]" @$(ECHO) "DRAFT = [$(DRAFT)]" @$(ECHO) "LATEX_OPTS = [$(LATEX_OPTS)]" @$(ECHO) "SLIDES = [$(SLIDES)]" @$(ECHO) "FIGURES = [$(FIGURES)]" @$(ECHO) "COMBINED = [$(COMBINED)]" @$(ECHO) "NOTES = [$(NOTES)]" @$(ECHO) "SLIDES_PREREQS = [$(SLIDES_PREREQS)]" @$(ECHO) "COMBINED_PREREQS = [$(COMBINED_PREREQS)]" @$(ECHO) "TARGETS = [$(TARGETS)]" ################################################################################ # # Clean up: get rid of all the temporary files. # tidy: $(RM) -f $(TIDY_FILES) # # Clean up: get rid of everything except the original source. # clean: tidy $(RM) -f $(CLEAN_FILES) ################################################################################ # # List all "phony" build targets. # targets: @$(ECHO) "targets: $(TARGETS)" ################################################################################ # # Standard default rules. # include $(GLOBAL_HANDBOOK_INCLUDE)/standard_rules.make

Ignore Space Show notes View

make-includes/build_lecture_rules.make

################################################################################
#
# File: $Id$
#
# Standard variables and rules for building a set of lecture files.
# Altering these definitions will affect ALL LECTURE MAKEFILES FOR ALL
# PAPERS!! If you need to do something specific for a particular paper,
# include a custom rule in its makefile. DON'T add it here!
#
################################################################################

################################################################################
#
# Add standard file suffixes.
#
include $(GLOBAL_HANDBOOK_INCLUDE)/standard_suffixes.make

################################################################################
#
# Standard directories.
#
IMGDIR=images

################################################################################
#
# Standard paths.
#
include $(GLOBAL_HANDBOOK_INCLUDE)/standard_paths.make

################################################################################
#
# Files to be cleaned by the various "clean" targets. Note that we don't
# "tidy" .aux files because they may be needed by the xr package for inter-
# document cross references, but won't get regenerated if the final target
# PDF files exist. They will be caught by by the "clean" target though.
#
TIDY_FILES+=*.tmp *.out *.log *.nav *.toc *.snm *.head *.dvi \
	slides-combined.pdf slides-notes.pdf
CLEAN_FILES+=*.aux *.pdf

################################################################################
#
# Various environment variables.
#
include $(GLOBAL_HANDBOOK_INCLUDE)/standard_environment.make
#
# Base file names for the various documents.
#
SLIDES?=Chapter$(CHAPTER)slides
FIGURES?=Chapter$(CHAPTER)figures
COMBINED?=Chapter$(CHAPTER)combined
NOTES?=Chapter$(CHAPTER)notes
#
# Standard files to be installed on the web server.
#
ifneq ($(strip $(SLIDES)),)
INSTALL_FILES+=$(SLIDES).pdf
endif
ifneq ($(strip $(FIGURES)),)
INSTALL_FILES+=$(FIGURES).pdf $(FIGURES)-reduced.pdf
endif
ifneq ($(strip $(COMBINED)),)
INSTALL_FILES+=$(COMBINED).pdf
endif
#
# List of standard "phony" build targets.
#
TARGETS+=slides notes slides-combined slides-notes figures figures2up combined
#
.PHONY: $(TARGETS)

################################################################################
#
# Display a message if someone tries to build a target that has been
# disabled (by setting the appropriate variable to empty in the makefile).
#
disabled_message=@$(ECHO) The \"$(1)\" target has been disabled for this chapter.

################################################################################
#
# Build everything.
#
all: slides notes figures figures2up combined

################################################################################
#
# Build presentation slides. If $(SLIDES) is empty, these rules are ignored.
#
ifneq ($(strip $(SLIDES)),)

#
# Set the prerequisites for the "slides" build target, depending on
# whether the figures document exists. If $(FIGURES) is non-empty, we need
# to include the figures .aux file for inter-document cross-references.
#
ifeq ($(strip $(FIGURES)),)
SLIDES_PREREQS:=$(SLIDES).pdf
else
SLIDES_PREREQS:=figures $(SLIDES).pdf
endif

#
# Build the slides for the presentation.
#
slides: $(SLIDES_PREREQS)

$(SLIDES).pdf: $(SLIDES).tex $(SLIDE_IMAGES) $(SLIDE_BACKGROUNDS) $(SLIDE_FILES)
	$(PDFLATEX) --jobname=$(SLIDES) '\documentclass[$(LATEX_OPTS)]{lectureslides}\input{$(SLIDES)}'
	$(PDFLATEX) --jobname=$(SLIDES) '\documentclass[$(LATEX_OPTS)]{lectureslides}\input{$(SLIDES)}'

else

slides:
	$(call disabled_message,$@)

endif

################################################################################
#
# Build the presentation notes. If $(NOTES) is empty, these rules are
# ignored.
#
ifneq ($(strip $(NOTES)),)

#
# Build the slides with notes.
#
slides-notes: slides-notes.pdf

slides-notes.pdf: $(SLIDES).tex $(SLIDE_IMAGES) $(SLIDE_BACKGROUNDS) $(SLIDE_FILES)
	$(PDFLATEX) --jobname=slides-notes '\documentclass[$(LATEX_OPTS),notes=onlyslideswithnotes]{lectureslides}\input{$(SLIDES)}'
	$(PDFLATEX) --jobname=slides-notes '\documentclass[$(LATEX_OPTS),notes=onlyslideswithnotes]{lectureslides}\input{$(SLIDES)}'

#
# Build the slides with notes, 6-up.
#
notes: $(NOTES).pdf

$(NOTES).pdf: $(NOTES).tex slides-notes.pdf
	$(PDFLATEX) $<
	$(PDFLATEX) $<

else

notes slides-notes:
	$(call disabled_message,$@)

endif

################################################################################
#
# Build the complete combined lecture document. If $(COMBINED) is empty,
# these rules are ignored.
#
ifneq ($(strip $(COMBINED)),)

#
# Set the prerequisites for the "combined" build target, depending on
# whether the figures document exists. If $(FIGURES) is empty, they are
# omitted from the combined document.
#
ifeq ($(strip $(FIGURES)),)
COMBINED_PREREQS:=$(COMBINED).tex slides-combined.pdf
else
COMBINED_PREREQS:=$(COMBINED).tex slides-combined.pdf $(FIGURES).pdf
endif

#
# Build the slides for the combined document.
#
slides-combined: slides-combined.pdf

slides-combined.pdf: $(SLIDES).tex $(SLIDE_IMAGES) $(SLIDE_BACKGROUNDS)
	$(PDFLATEX) --jobname=slides-combined '\documentclass[$(LATEX_OPTS),handout]{lectureslides}\input{$(SLIDES)}'
	$(PDFLATEX) --jobname=slides-combined '\documentclass[$(LATEX_OPTS),handout]{lectureslides}\input{$(SLIDES)}'

#
# Build the complete combined document.
#
combined: $(COMBINED).pdf

$(COMBINED).pdf: $(COMBINED_PREREQS) $(COMBI_IMAGES) $(COMBI_FILES)
	$(PDFLATEX) $<
	$(PDFLATEX) $<

else

combined slides-combined:
	$(call disabled_message,$@)

endif

################################################################################
#
# Build the figures and examples document. If $(FIGURES) is empty, these
# rules are ignored.
#
ifneq ($(strip $(FIGURES)),)

figures: $(FIGURES).pdf

$(FIGURES).pdf: $(FIGURES).tex $(FIG_IMAGES) $(FIG_FILES)
	$(PDFLATEX) $<
	$(PDFLATEX) $<

figures2up: $(FIGURES)-reduced.pdf

$(FIGURES)-reduced.pdf: $(FIGURES).pdf
	$(PDFNUP) $< --nup 2x1 --outfile $@

else

figures figures2up:
	$(call disabled_message,$@)

endif

################################################################################
#
# Build the test document.
#
test: test.pdf

test.pdf: test.tex

################################################################################
#
# Link the appropriate files to the deployment directory, then synchronise this
# with Blackboard. This relies on the environment variable HANDBOOK_INSTALL_ROOT
# being defined, and that it points to a valid directory. Note that all existing
# symbolic links in the entire lectures deployment tree are deleted first.
#
# See build_document_rules.make for an explanation of why the install
# uses a foreach.
#
# Note that this won't do anything clever if you give it files that are
# in subdirectories of the current directory. Everything will be flattened
# at the other end. That is, something like "images/foo.pdf" will go into
# the installation directory as "foo.pdf", not "images/foo.pdf".
#
install:
	@$(ANNOUNCE) "Building deployment links"
	@$(TEST) -d $(HANDBOOK_INSTALL_ROOT)
	@$(MKDIR_P) $(INSTALL_DIRECTORY)
	@$(FIND) $(INSTALL_DIRECTORY) -type l -delete
	@$(foreach f,$(INSTALL_FILES),if $(TEST) ! -f $(INSTALL_DIRECTORY)/$(f) -o $(CURDIR)/$(f) -nt $(INSTALL_DIRECTORY)/$(f); then $(ECHO) "Linking $(f)"; $(LN_S) $(CURDIR)/$(f) $(INSTALL_DIRECTORY); fi;)
	@$(ANNOUNCE) "Synchronising with Blackboard"
	@$(SITECOPY) --update Blackboard$(PAPER_NUMBER)

################################################################################
#
# Debugging: print the values of the standard variables.
#
debug:
	@$(ANNOUNCE) Externally defined variables
	@$(ECHO) "TEACHING_SHARED = [$(TEACHING_SHARED)]"
	@$(ECHO) "HANDBOOK_INSTALL_ROOT = [$(HANDBOOK_INSTALL_ROOT)]"
	@$(ECHO) "CHAPTER = [$(CHAPTER)]"
	@$(ANNOUNCE) Internally defined variables
	@$(ECHO) "SUBJECT_CODE = [$(SUBJECT_CODE)]"
	@$(ECHO) "PAPER_NUMBER = [$(PAPER_NUMBER)]"
	@$(ECHO) "GLOBAL_HANDBOOK_INCLUDE = [$(GLOBAL_HANDBOOK_INCLUDE)]"
	@$(ECHO) "INSTALL_DIRECTORY = [$(INSTALL_DIRECTORY)]"
	@$(ECHO) "INSTALL_FILES = [$(INSTALL_FILES)]"
	@$(ECHO) "SLIDE_IMAGES = [$(SLIDE_IMAGES)]"
	@$(ECHO) "SLIDE_BACKGROUNDS = [$(SLIDE_BACKGROUNDS)]"
	@$(ECHO) "SLIDE_FILES = [$(SLIDE_FILES)]"
	@$(ECHO) "FIG_IMAGES = [$(FIG_IMAGES)]"
	@$(ECHO) "FIG_FILES = [$(FIG_FILES)]"
	@$(ECHO) "TIDY_FILES = [$(TIDY_FILES)]"
	@$(ECHO) "CLEAN_FILES = [$(CLEAN_FILES)]"
	@$(ECHO) "DRAFT = [$(DRAFT)]"
	@$(ECHO) "LATEX_OPTS = [$(LATEX_OPTS)]"
	@$(ECHO) "SLIDES = [$(SLIDES)]"
	@$(ECHO) "FIGURES = [$(FIGURES)]"
	@$(ECHO) "COMBINED = [$(COMBINED)]"
	@$(ECHO) "NOTES = [$(NOTES)]"
	@$(ECHO) "SLIDES_PREREQS = [$(SLIDES_PREREQS)]"
	@$(ECHO) "COMBINED_PREREQS = [$(COMBINED_PREREQS)]"
	@$(ECHO) "TARGETS = [$(TARGETS)]"

################################################################################
#
# Clean up: get rid of all the temporary files.
#
tidy:
	$(RM) -f $(TIDY_FILES)
#
# Clean up: get rid of everything except the original source.
#
clean: tidy
	$(RM) -f $(CLEAN_FILES)

################################################################################
#
# List all "phony" build targets.
#
targets:
	@$(ECHO) "targets: $(TARGETS)"

################################################################################
#
# Standard default rules.
#
include $(GLOBAL_HANDBOOK_INCLUDE)/standard_rules.make

################################################################################
#
# Add standard file suffixes.
#
include $(GLOBAL_HANDBOOK_INCLUDE)/standard_suffixes.make

################################################################################
#
# Standard directories.
#
IMGDIR=images

################################################################################
#
# Standard paths.
#
include $(GLOBAL_HANDBOOK_INCLUDE)/standard_paths.make

################################################################################
#
# Build everything.
#
all: slides notes figures figures2up combined

################################################################################
#
# Build presentation slides. If $(SLIDES) is empty, these rules are ignored.
#
ifneq ($(strip $(SLIDES)),)

#
# Build the slides for the presentation.
#
slides: $(SLIDES_PREREQS)

else

slides:
	$(call disabled_message,$@)

endif

################################################################################
#
# Build the presentation notes. If $(NOTES) is empty, these rules are
# ignored.
#
ifneq ($(strip $(NOTES)),)

#
# Build the slides with notes.
#
slides-notes: slides-notes.pdf

#
# Build the slides with notes, 6-up.
#
notes: $(NOTES).pdf

$(NOTES).pdf: $(NOTES).tex slides-notes.pdf
	$(PDFLATEX) $<
	$(PDFLATEX) $<

else

notes slides-notes:
	$(call disabled_message,$@)

endif

#
# Build the slides for the combined document.
#
slides-combined: slides-combined.pdf

#
# Build the complete combined document.
#
combined: $(COMBINED).pdf

$(COMBINED).pdf: $(COMBINED_PREREQS) $(COMBI_IMAGES) $(COMBI_FILES)
	$(PDFLATEX) $<
	$(PDFLATEX) $<

else

combined slides-combined:
	$(call disabled_message,$@)

endif

figures: $(FIGURES).pdf

$(FIGURES).pdf: $(FIGURES).tex $(FIG_IMAGES) $(FIG_FILES)
	$(PDFLATEX) $<
	$(PDFLATEX) $<

figures2up: $(FIGURES)-reduced.pdf

$(FIGURES)-reduced.pdf: $(FIGURES).pdf
	$(PDFNUP) $< --nup 2x1 --outfile $@

else

figures figures2up:
	$(call disabled_message,$@)

endif

################################################################################
#
# Build the test document.
#
test: test.pdf

test.pdf: test.tex

################################################################################
#
# Install the appropriate files on the web server. This relies on the
# environment variable HANDBOOK_INSTALL_ROOT being defined, and
# (assuming that this variable points to a directory on the network) the
# appropriate share has been mounted.
#
# See build_document_rules.make for an explanation of why the install
# uses a foreach.
#
# Note that this won't do anything clever if you give it files that are
# in subdirectories of the current directory. Everything will be flattened
# at the other end. That is, something like "images/foo.pdf" will go into
# the installation directory as "foo.pdf", not "images/foo.pdf".
#
install:
	@$(ANNOUNCE) "Copying files to web server --- make sure that you have the share mounted!"
	@$(TEST) -d $(HANDBOOK_INSTALL_ROOT)
	@$(MKDIR_P) $(INSTALL_DIRECTORY)
	@$(foreach f,$(INSTALL_FILES),if $(TEST) ! -f $(INSTALL_DIRECTORY)/$(f) -o $(f) -nt $(INSTALL_DIRECTORY)/$(f); then $(ECHO) "Installing $(f)"; $(CP) $(f) $(INSTALL_DIRECTORY); fi;)

################################################################################
#
# List all "phony" build targets.
#
targets:
	@$(ECHO) "targets: $(TARGETS)"

################################################################################
#
# Standard default rules.
#
include $(GLOBAL_HANDBOOK_INCLUDE)/standard_rules.make

Ignore Space Show notes View make-includes/build_section_rules.make
################################################################################ # # File: $Id$ # # Standard variables and rules for building a particular section of the # handbook. Altering these definitions will affect ALL SECTION MAKEFILES # FOR ALL PAPERS!! If you need to do something specific for a particular # paper, include a custom rule in its makefile. DON'T add it here! # ################################################################################ ################################################################################ # # Run one-time initialisation stuff, _unless_ NOINIT is defined. Any # "parent" makefile that's already done the same one-time initialisation # and calls this one should define NOINIT (the value doesn't matter) to # switch off one-time initialisation in this makefile. Thus if the # "parent" makefile calls this makefile several times, things like the # content checking will only happen once for a single invocation of the # "parent" makefile. # # When running this makefile standalone, _don't_ define NOINIT, and # everything will still work as expected. # ifndef NOINIT include $(GLOBAL_HANDBOOK_INCLUDE)/remove_content_marker_files.make # # Ensure that the patterns files exist. If they don't, copy the originals # across from the shared directory and abort the run so that the user can # edit them appropriately. # CHECK_ANSWERS_PATTERNS:=$(shell ($(TEST) -f $(LOCAL_HANDBOOK_INCLUDE)/answers.patterns) \|\| ($(CP) $(TEACHING_SHARED)/Authoring/Handbook/makefile-templates/answers.patterns $(LOCAL_HANDBOOK_INCLUDE); $(ECHO) "answers")) CHECK_QUESTIONS_PATTERNS:=$(shell ($(TEST) -f $(LOCAL_HANDBOOK_INCLUDE)/questions.patterns) \|\| ($(CP) $(TEACHING_SHARED)/Authoring/Handbook/makefile-templates/questions.patterns $(LOCAL_HANDBOOK_INCLUDE); $(ECHO) "questions")) CHECK_INSTALL_PATTERNS:=$(shell ($(TEST) -f $(LOCAL_HANDBOOK_INCLUDE)/install.patterns) \|\| ($(CP) $(TEACHING_SHARED)/Authoring/Handbook/makefile-templates/install.patterns $(LOCAL_HANDBOOK_INCLUDE); $(ECHO) "install")) CHECK_ALL_PATTERNS:=$(CHECK_ANSWERS_PATTERNS) $(CHECK_QUESTIONS_PATTERNS) $(CHECK_INSTALL_PATTERNS) ifneq "$(strip $(CHECK_ALL_PATTERNS))" "" $(error Patterns files have been restored from defaults ($(CHECK_ALL_PATTERNS)), please check them before continuing) endif endif # Now that the one-time initialsation is out of the way, ensure that # NOINIT (the value doesn't matter) is exported to all sub-makefiles to # prevent them from repeating the one-time initialisation. This prevents # the situation where we go "make" and content checking happens twice, # once for the web version and once for the print version. (Although I'm # not sure why it only happens twice --- I would have expected four times. # Go figure.) # export NOINIT?=x ################################################################################ # # Given that we print out our own messages, I see no point in splurging # "Entering...leaving directory" messages all over the screen. It's hard # enough to figure out what's going on already :) # MAKEFLAGS=--no-print-directory ################################################################################ # # Include variables defining the current paper. # include $(LOCAL_HANDBOOK_INCLUDE)/paper_variables.make ################################################################################ # # Defines which section we are currently building. This is actually the # path to the main folder for the section. Normally this is exported from # a higher-level makefile (i.e., "export SECTION=path/to/section"). # export SECTION?=$(notdir $(CURDIR)) ################################################################################ # # Define patterns for required source files. We define the basic variables # first (empty), then scan the make-includes directory for patterns files. # Each patterns file should add its patterns (using +=) to the appropriate # pattern variable from the following. # # QUESTIONS_PATTERNS defines the patterns for the "questions" version of # the handbook (both web and print). # QUESTIONS_PATTERNS:= # # ANSWERS_PATTERNS defines the patterns for the "answers" version of # the handbook (both web and print). # ANSWERS_PATTERNS:= # # _INSTALL_PATTERNS defines the patterns for installing on the web server. # QUESTION_INSTALL_PATTERNS:= ANSWER_INSTALL_PATTERNS:= # # Now go looking for patterns files in the local make-includes directory. # files should be named ".patterns" # include $(LOCAL_HANDBOOK_INCLUDE)/.patterns ################################################################################ # # Define lists of source directories that contain documents to be included # in the handbook. These are generated according to the values of the # patterns defined in the various pattern include files. # # Note that all the find commands are relative to the working directory of # the makefile that includes this file. Thus, if we are in the Tutorials # directory, all finds will be relative to this (and thus the lab patterns # won't find anything). The main consequence of this is that the # CLEAN_DIRS find will only generate a list of the directories that can be # cleaned _for the current section_. In practice, however, this will still # work as expected; if we're cleaning just that section, this is what we # want anyway, and if we're cleaning the entire handbook, the master # handbook makefile will call the makefile for each section separately. # ################################################################################ # # Directories for the complete collection of documents to be built for the # "questions" and "answers" versions of the handbook, respectively. Since # the tutorials variables will be empty when we're in the labs directory, # and vice versa, everything just works! # QUESTION_SRC_DIRS:=$(foreach p,$(QUESTIONS_PATTERNS),$(notdir $(shell $(FIND) . -regex './'$(p) \| sort))) ANSWER_SRC_DIRS:=$(foreach p,$(ANSWERS_PATTERNS),$(notdir $(shell $(FIND) . -regex './'$(p) \| sort))) QUESTION_INSTALL_DIRS:=$(foreach p,$(QUESTION_INSTALL_PATTERNS),$(notdir $(shell $(FIND) . -regex './'$(p) \| sort))) ANSWER_INSTALL_DIRS:=$(foreach p,$(ANSWER_INSTALL_PATTERNS),$(notdir $(shell $(FIND) . -regex './'$(p) \| sort))) # # List of directories that can be cleaned. "-mindepth 2" ensures # that we only include sub-directories of the current directory. # CLEAN_DIRS:=$(dir $(shell $(FIND) . -mindepth 2 -name Makefile)) ################################################################################ # # Define lists of LaTeX source files. These will be written out to the # appropriate manifest file, so that the master handbook makefile can # import them into the handbook LaTeX build. Only the files specified by # the file patterns are included. The manifest file is also only updated # when necessary, i.e., when the list of files changes. # QUESTION_TEX_SOURCE:=$(foreach d,$(QUESTION_SRC_DIRS),$d/$d-questions.tex) ANSWER_TEX_SOURCE:=$(foreach d,$(ANSWER_SRC_DIRS),$d/$d-answers.tex) QUESTION_TEX_INPUTS:=$(foreach f,$(QUESTION_TEX_SOURCE),\\input{sections/$(SECTION)/$(basename $f)}) ANSWER_TEX_INPUTS:=$(foreach f,$(ANSWER_TEX_SOURCE),\\input{sections/$(SECTION)/$(basename $f)}) ################################################################################ # # Directory to install files into on web server. # INSTALL_DIRECTORY:=$(HANDBOOK_INSTALL_ROOT)/$(SUBJECT_CODE)$(PAPER_NUMBER)/Blackboard/$(SECTION) ################################################################################ # # Files to be installed on web server. # INSTALL_FILES:= ################################################################################ # # Lists of files for cleaning up. Add to these (using +=) as necessary in # derived makefiles. # WEB_CLEAN_FILES:= PRINT_CLEAN_FILES:=-manifest.tex ALL_CLEAN_FILES:=$(WEB_CLEAN_FILES) $(PRINT_CLEAN_FILES) ################################################################################ # # List of possible targets. If you need to add to this for a specific # case, use TARGETS+=xxx in the actual makefile. # TARGETS:=all targets debug install \ web web-questions web-answers \ print print-questions print-answers \ questions answers \ print-question-docs print-answer-docs \ clean web-clean print-clean .PHONY: $(TARGETS) ################################################################################ # # Build everything. # all: web print ################################################################################ # # Build questions or answers only. # questions: web-questions print-questions answers: web-answers print-answers ################################################################################ # # Build web version only. # # Note the weird dance with the ifs in the recursive make calls. If we # don't do this, the foreach just keeps going even if one of the sub-makes # dies. We therefore have to do our own error detection and dying. Bummer. # web: web-questions web-answers web-questions: @$(foreach d,$(QUESTION_SRC_DIRS),if $(MAKE) -C $d web-questions; then $(TRUE); else exit 1; fi;) web-answers: @$(foreach d,$(ANSWER_SRC_DIRS),if $(MAKE) -C $d web-answers; then $(TRUE); else exit 1; fi;) ################################################################################ # # Build print version only. We also need to build the manifest files that # will be \input into the master handbook.tex document. # print: print-questions print-answers print-questions: print-question-docs question-manifest.tex print-question-docs: @$(foreach d,$(QUESTION_SRC_DIRS),if $(MAKE) -C $d print-questions; then $(TRUE); else exit 1; fi;) question-manifest.tex: $(QUESTION_TEX_SOURCE) $(LOCAL_HANDBOOK_INCLUDE)/questions.patterns @$(ANNOUNCE) "Generating questions version manifest file in $(SECTION)" @$(ECHO) $(QUESTION_TEX_INPUTS) > $@ question-pdfs: @$(foreach d,$(QUESTION_SRC_DIRS),if $(MAKE) -C $d $d-questions.pdf $d-questions-2up.pdf; then $(TRUE); else exit 1; fi;) print-answers: print-answer-docs answer-manifest.tex print-answer-docs: @$(foreach d,$(ANSWER_SRC_DIRS),if $(MAKE) -C $d print-answers; then $(TRUE); else exit 1; fi;) answer-manifest.tex: $(ANSWER_TEX_SOURCE) $(LOCAL_HANDBOOK_INCLUDE)/answers.patterns @$(ANNOUNCE) "Generating answers version manifest file in $(SECTION)" @$(ECHO) $(ANSWER_TEX_INPUTS) > $@ answer-pdfs: @$(foreach d,$(ANSWER_SRC_DIRS),if $(MAKE) -C $d $d-answers.pdf $d-answers-2up.pdf; then $(TRUE); else exit 1; fi;) ################################################################################ # # Link the appropriate files to the deployment directory. This relies on the # environment variable HANDBOOK_INSTALL_DIRECTORY being defined, and # and that it points to a valid directory. Note that all existing symbolic links # in the entire section are deleted first. We do this at the section level # rather than the handbook level because there are other things (like lectures) # linked into the deployment directory that aren't managed by the handbook # framework. # # Most of the work is carried out by recursive make calls to the # subordinate document makefiles. Files that are generic to the entire # section are dealt with here, though. Each file in the build directory is # checked against the corresponding file in the install directory. The # local file is only copied to the install directory if it is newer, or # the remote file doesn't exist. See build_document_rules.make for an # explanation of why it's implemented using a foreach. # install: @$(ANNOUNCE) "Creating links in $(SECTION)" @$(TEST) -d $(HANDBOOK_INSTALL_ROOT) @$(MKDIR_P) $(INSTALL_DIRECTORY) @$(FIND) $(INSTALL_DIRECTORY) -type l -delete @$(foreach d,$(QUESTION_INSTALL_DIRS),if $(MAKE) -C $d install-questions; then $(TRUE); else exit 1; fi;) @$(foreach d,$(ANSWER_INSTALL_DIRS),if $(MAKE) -C $d install-answers; then $(TRUE); else exit 1; fi;) @$(foreach f,$(INSTALL_FILES),if $(TEST) ! -f $(INSTALL_DIRECTORY)/$(f) -o $(CURDIR)/$(f) -nt $(INSTALL_DIRECTORY)/$(f); then $(ECHO) "Linking $(f)"; $(LN_S) $(CURDIR)/$(f) $(INSTALL_DIRECTORY); fi;) ################################################################################ # # Clean up all generated files. # "web-clean" and "print-clean" only clean up files for the web and print # versions, respectively. Note that "clean" isn't dependent on either # "web-clean" or "print-clean", to ensure that the correct target is # used when calling the sub-makefile. # clean: @$(foreach d,$(CLEAN_DIRS),$(MAKE) -C $d $@;) ifneq ($(strip $(ALL_CLEAN_FILES)),) -$(RM) -f $(ALL_CLEAN_FILES) endif web-clean: @$(foreach d,$(CLEAN_DIRS),$(MAKE) -C $d $@;) ifneq ($(strip $(WEB_CLEAN_FILES)),) -$(RM) -f $(WEB_CLEAN_FILES) endif print-clean: @$(foreach d,$(CLEAN_DIRS),$(MAKE) -C $d $@;) ifneq ($(strip $(PRINT_CLEAN_FILES)),) -$(RM) -f $(PRINT_CLEAN_FILES) endif # # "init-clean" is a dummy target that can be used to ensure that the # content-checked marker files get deleted. Do a "make -C xxx" (i.e., # don't define NOINIT). The actual deletion is done by the one-time # initialisation in remove_content_marker_files.make. Note that there's no # point in this rule printing anything, because the output will probably # end up buried in a one-time initialisation "variable". # init-clean: ################################################################################ # # Debugging information, mostly lists of the generated variables. # debug: @$(ANNOUNCE) Externally defined variables @$(ECHO) "TEACHING_SHARED = [$(TEACHING_SHARED)]" @$(ECHO) "HANDBOOK_INSTALL_ROOT = [$(HANDBOOK_INSTALL_ROOT)]" @$(ECHO) "NOINIT = [$(NOINIT)]" @$(ANNOUNCE) Internally defined variables @$(ECHO) "GLOBAL_HANDBOOK_INCLUDE = [$(GLOBAL_HANDBOOK_INCLUDE)]" @$(ECHO) "LOCAL_HANDBOOK_INCLUDE = [$(LOCAL_HANDBOOK_INCLUDE)]" @$(ECHO) "QUESTIONS_PATTERNS = [$(QUESTIONS_PATTERNS)]" @$(ECHO) "ANSWERS_PATTERNS = [$(ANSWERS_PATTERNS)]" @$(ECHO) "QUESTION_INSTALL_PATTERNS = [$(QUESTION_INSTALL_PATTERNS)]" @$(ECHO) "ANSWER_INSTALL_PATTERNS = [$(ANSWER_INSTALL_PATTERNS)]" @$(ECHO) "SECTION = [$(SECTION)]" @$(ECHO) "QUESTION_SRC_DIRS = [$(QUESTION_SRC_DIRS)]" @$(ECHO) "ANSWER_SRC_DIRS = [$(ANSWER_SRC_DIRS)]" @$(ECHO) "QUESTION_INSTALL_DIRS = [$(QUESTION_INSTALL_DIRS)]" @$(ECHO) "ANSWER_INSTALL_DIRS = [$(ANSWER_INSTALL_DIRS)]" @$(ECHO) "CLEAN_DIRS = [$(CLEAN_DIRS)]" @$(ECHO) "QUESTION_TEX_SOURCE = [$(QUESTION_TEX_SOURCE)]" @$(ECHO) "ANSWER_TEX_SOURCE = [$(ANSWER_TEX_SOURCE)]" @$(ECHO) "QUESTION_TEX_INPUTS = [$(QUESTION_TEX_INPUTS)]" @$(ECHO) "ANSWER_TEX_INPUTS = [$(ANSWER_TEX_INPUTS)]" @$(ECHO) "INSTALL_DIRECTORY = [$(INSTALL_DIRECTORY)]" @$(ECHO) "INSTALL_FILES = [$(INSTALL_FILES)]" @$(ECHO) "WEB_CLEAN_FILES = [$(WEB_CLEAN_FILES)]" @$(ECHO) "PRINT_CLEAN_FILES = [$(PRINT_CLEAN_FILES)]" @$(ECHO) "ALL_CLEAN_FILES = [$(ALL_CLEAN_FILES)]" ################################################################################ # # Print out the list of targets. Handy for when you forget! # targets: @$(ECHO) $(TARGETS) ################################################################################ # # File: $Id$ # # Standard variables and rules for building a particular section of the # handbook. Altering these definitions will affect ALL SECTION MAKEFILES # FOR ALL PAPERS!! If you need to do something specific for a particular # paper, include a custom rule in its makefile. DON'T add it here! # ################################################################################ ################################################################################ # # Run one-time initialisation stuff, _unless_ NOINIT is defined. Any # "parent" makefile that's already done the same one-time initialisation # and calls this one should define NOINIT (the value doesn't matter) to # switch off one-time initialisation in this makefile. Thus if the # "parent" makefile calls this makefile several times, things like the # content checking will only happen once for a single invocation of the # "parent" makefile. # # When running this makefile standalone, _don't_ define NOINIT, and # everything will still work as expected. # ifndef NOINIT include $(GLOBAL_HANDBOOK_INCLUDE)/remove_content_marker_files.make # # Ensure that the patterns files exist. If they don't, copy the originals # across from the shared directory and abort the run so that the user can # edit them appropriately. # CHECK_ANSWERS_PATTERNS:=$(shell ($(TEST) -f $(LOCAL_HANDBOOK_INCLUDE)/answers.patterns) \|\| ($(CP) $(TEACHING_SHARED)/Authoring/Handbook/makefile-templates/answers.patterns $(LOCAL_HANDBOOK_INCLUDE); $(ECHO) "answers")) CHECK_QUESTIONS_PATTERNS:=$(shell ($(TEST) -f $(LOCAL_HANDBOOK_INCLUDE)/questions.patterns) \|\| ($(CP) $(TEACHING_SHARED)/Authoring/Handbook/makefile-templates/questions.patterns $(LOCAL_HANDBOOK_INCLUDE); $(ECHO) "questions")) CHECK_INSTALL_PATTERNS:=$(shell ($(TEST) -f $(LOCAL_HANDBOOK_INCLUDE)/install.patterns) \|\| ($(CP) $(TEACHING_SHARED)/Authoring/Handbook/makefile-templates/install.patterns $(LOCAL_HANDBOOK_INCLUDE); $(ECHO) "install")) CHECK_ALL_PATTERNS:=$(CHECK_ANSWERS_PATTERNS) $(CHECK_QUESTIONS_PATTERNS) $(CHECK_INSTALL_PATTERNS) ifneq "$(strip $(CHECK_ALL_PATTERNS))" "" $(error Patterns files have been restored from defaults ($(CHECK_ALL_PATTERNS)), please check them before continuing) endif endif # Now that the one-time initialsation is out of the way, ensure that # NOINIT (the value doesn't matter) is exported to all sub-makefiles to # prevent them from repeating the one-time initialisation. This prevents # the situation where we go "make" and content checking happens twice, # once for the web version and once for the print version. (Although I'm # not sure why it only happens twice --- I would have expected four times. # Go figure.) # export NOINIT?=x ################################################################################ # # Given that we print out our own messages, I see no point in splurging # "Entering...leaving directory" messages all over the screen. It's hard # enough to figure out what's going on already :) # MAKEFLAGS=--no-print-directory ################################################################################ # # Include variables defining the current paper. # include $(LOCAL_HANDBOOK_INCLUDE)/paper_variables.make ################################################################################ # # Defines which section we are currently building. This is actually the # path to the main folder for the section. Normally this is exported from # a higher-level makefile (i.e., "export SECTION=path/to/section"). # export SECTION?=$(notdir $(CURDIR)) ################################################################################ # # Define patterns for required source files. We define the basic variables # first (empty), then scan the make-includes directory for patterns files. # Each patterns file should add its patterns (using +=) to the appropriate # pattern variable from the following. # # QUESTIONS_PATTERNS defines the patterns for the "questions" version of # the handbook (both web and print). # QUESTIONS_PATTERNS:= # # ANSWERS_PATTERNS defines the patterns for the "answers" version of # the handbook (both web and print). # ANSWERS_PATTERNS:= # # _INSTALL_PATTERNS defines the patterns for installing on the web server. # QUESTION_INSTALL_PATTERNS:= ANSWER_INSTALL_PATTERNS:= # # Now go looking for patterns files in the local make-includes directory. # files should be named ".patterns" # include $(LOCAL_HANDBOOK_INCLUDE)/.patterns ################################################################################ # # Define lists of source directories that contain documents to be included # in the handbook. These are generated according to the values of the # patterns defined in the various pattern include files. # # Note that all the find commands are relative to the working directory of # the makefile that includes this file. Thus, if we are in the Tutorials # directory, all finds will be relative to this (and thus the lab patterns # won't find anything). The main consequence of this is that the # CLEAN_DIRS find will only generate a list of the directories that can be # cleaned _for the current section_. In practice, however, this will still # work as expected; if we're cleaning just that section, this is what we # want anyway, and if we're cleaning the entire handbook, the master # handbook makefile will call the makefile for each section separately. # ################################################################################ # # Directories for the complete collection of documents to be built for the # "questions" and "answers" versions of the handbook, respectively. Since # the tutorials variables will be empty when we're in the labs directory, # and vice versa, everything just works! # QUESTION_SRC_DIRS:=$(foreach p,$(QUESTIONS_PATTERNS),$(notdir $(shell $(FIND) . -regex './'$(p) \| sort))) ANSWER_SRC_DIRS:=$(foreach p,$(ANSWERS_PATTERNS),$(notdir $(shell $(FIND) . -regex './'$(p) \| sort))) QUESTION_INSTALL_DIRS:=$(foreach p,$(QUESTION_INSTALL_PATTERNS),$(notdir $(shell $(FIND) . -regex './'$(p) \| sort))) ANSWER_INSTALL_DIRS:=$(foreach p,$(ANSWER_INSTALL_PATTERNS),$(notdir $(shell $(FIND) . -regex './'$(p) \| sort))) # # List of directories that can be cleaned. "-mindepth 2" ensures # that we only include sub-directories of the current directory. # CLEAN_DIRS:=$(dir $(shell $(FIND) . -mindepth 2 -name Makefile)) ################################################################################ # # Define lists of LaTeX source files. These will be written out to the # appropriate manifest file, so that the master handbook makefile can # import them into the handbook LaTeX build. Only the files specified by # the file patterns are included. The manifest file is also only updated # when necessary, i.e., when the list of files changes. # QUESTION_TEX_SOURCE:=$(foreach d,$(QUESTION_SRC_DIRS),$d/$d-questions.tex) ANSWER_TEX_SOURCE:=$(foreach d,$(ANSWER_SRC_DIRS),$d/$d-answers.tex) QUESTION_TEX_INPUTS:=$(foreach f,$(QUESTION_TEX_SOURCE),\\input{sections/$(SECTION)/$(basename $f)}) ANSWER_TEX_INPUTS:=$(foreach f,$(ANSWER_TEX_SOURCE),\\input{sections/$(SECTION)/$(basename $f)}) ################################################################################ # # Directory to install files into on web server. # INSTALL_DIRECTORY:=$(HANDBOOK_INSTALL_ROOT)/$(SUBJECT_CODE)$(PAPER_NUMBER)/www/$(SECTION) ################################################################################ # # Files to be installed on web server. # INSTALL_FILES:= ################################################################################ # # Lists of files for cleaning up. Add to these (using +=) as necessary in # derived makefiles. # WEB_CLEAN_FILES:= PRINT_CLEAN_FILES:=-manifest.tex ALL_CLEAN_FILES:=$(WEB_CLEAN_FILES) $(PRINT_CLEAN_FILES) ################################################################################ # # List of possible targets. If you need to add to this for a specific # case, use TARGETS+=xxx in the actual makefile. # TARGETS:=all targets debug install \ web web-questions web-answers \ print print-questions print-answers \ questions answers \ print-question-docs print-answer-docs \ clean web-clean print-clean .PHONY: $(TARGETS) ################################################################################ # # Build everything. # all: web print ################################################################################ # # Build questions or answers only. # questions: web-questions print-questions answers: web-answers print-answers ################################################################################ # # Build web version only. # # Note the weird dance with the ifs in the recursive make calls. If we # don't do this, the foreach just keeps going even if one of the sub-makes # dies. We therefore have to do our own error detection and dying. Bummer. # web: web-questions web-answers web-questions: @$(foreach d,$(QUESTION_SRC_DIRS),if $(MAKE) -C $d web-questions; then $(TRUE); else exit 1; fi;) web-answers: @$(foreach d,$(ANSWER_SRC_DIRS),if $(MAKE) -C $d web-answers; then $(TRUE); else exit 1; fi;) ################################################################################ # # Build print version only. We also need to build the manifest files that # will be \input into the master handbook.tex document. # print: print-questions print-answers print-questions: print-question-docs question-manifest.tex print-question-docs: @$(foreach d,$(QUESTION_SRC_DIRS),if $(MAKE) -C $d print-questions; then $(TRUE); else exit 1; fi;) question-manifest.tex: $(QUESTION_TEX_SOURCE) $(LOCAL_HANDBOOK_INCLUDE)/questions.patterns @$(ANNOUNCE) "Generating questions version manifest file in $(SECTION)" @$(ECHO) $(QUESTION_TEX_INPUTS) > $@ question-pdfs: @$(foreach d,$(QUESTION_SRC_DIRS),if $(MAKE) -C $d $d-questions.pdf $d-questions-2up.pdf; then $(TRUE); else exit 1; fi;) print-answers: print-answer-docs answer-manifest.tex print-answer-docs: @$(foreach d,$(ANSWER_SRC_DIRS),if $(MAKE) -C $d print-answers; then $(TRUE); else exit 1; fi;) answer-manifest.tex: $(ANSWER_TEX_SOURCE) $(LOCAL_HANDBOOK_INCLUDE)/answers.patterns @$(ANNOUNCE) "Generating answers version manifest file in $(SECTION)" @$(ECHO) $(ANSWER_TEX_INPUTS) > $@ answer-pdfs: @$(foreach d,$(ANSWER_SRC_DIRS),if $(MAKE) -C $d $d-answers.pdf $d-answers-2up.pdf; then $(TRUE); else exit 1; fi;) ################################################################################ # # Install the appropriate files on the web server. This relies on the # environment variable HANDBOOK_INSTALL_DIRECTORY being defined, and # (assuming that this variable points to a directory on the network) the # appropriate share has been mounted. # # Most of the work is carried out by recursive make calls to the # subordinate document makefiles. Files that are generic to the entire # section are dealt with here, though. Each file in the build directory is # checked against the corresponding file in the install directory. The # local file is only copied to the install directory if it is newer, or # the remote file doesn't exist. See build_document_rules.make for an # explanation of why it's implemented using a foreach. # install: @$(ANNOUNCE) "Installing files in $(SECTION)" @$(TEST) -d $(HANDBOOK_INSTALL_ROOT) @$(MKDIR_P) $(INSTALL_DIRECTORY) @$(foreach d,$(QUESTION_INSTALL_DIRS),if $(MAKE) -C $d install-questions; then $(TRUE); else exit 1; fi;) @$(foreach d,$(ANSWER_INSTALL_DIRS),if $(MAKE) -C $d install-answers; then $(TRUE); else exit 1; fi;) @$(foreach f,$(INSTALL_FILES),if $(TEST) ! -f $(INSTALL_DIRECTORY)/$(f) -o $(f) -nt $(INSTALL_DIRECTORY)/$(f); then $(ECHO) "Installing $(f)"; $(CP) $(f) $(INSTALL_DIRECTORY); fi;) ################################################################################ # # Clean up all generated files. # "web-clean" and "print-clean" only clean up files for the web and print # versions, respectively. Note that "clean" isn't dependent on either # "web-clean" or "print-clean", to ensure that the correct target is # used when calling the sub-makefile. # clean: @$(foreach d,$(CLEAN_DIRS),$(MAKE) -C $d $@;) ifneq ($(strip $(ALL_CLEAN_FILES)),) -$(RM) -f $(ALL_CLEAN_FILES) endif web-clean: @$(foreach d,$(CLEAN_DIRS),$(MAKE) -C $d $@;) ifneq ($(strip $(WEB_CLEAN_FILES)),) -$(RM) -f $(WEB_CLEAN_FILES) endif print-clean: @$(foreach d,$(CLEAN_DIRS),$(MAKE) -C $d $@;) ifneq ($(strip $(PRINT_CLEAN_FILES)),) -$(RM) -f $(PRINT_CLEAN_FILES) endif # # "init-clean" is a dummy target that can be used to ensure that the # content-checked marker files get deleted. Do a "make -C xxx" (i.e., # don't define NOINIT). The actual deletion is done by the one-time # initialisation in remove_content_marker_files.make. Note that there's no # point in this rule printing anything, because the output will probably # end up buried in a one-time initialisation "variable". # init-clean: ################################################################################ # # Debugging information, mostly lists of the generated variables. # debug: @$(ANNOUNCE) Externally defined variables @$(ECHO) "TEACHING_SHARED = [$(TEACHING_SHARED)]" @$(ECHO) "HANDBOOK_INSTALL_ROOT = [$(HANDBOOK_INSTALL_ROOT)]" @$(ECHO) "NOINIT = [$(NOINIT)]" @$(ANNOUNCE) Internally defined variables @$(ECHO) "GLOBAL_HANDBOOK_INCLUDE = [$(GLOBAL_HANDBOOK_INCLUDE)]" @$(ECHO) "LOCAL_HANDBOOK_INCLUDE = [$(LOCAL_HANDBOOK_INCLUDE)]" @$(ECHO) "QUESTIONS_PATTERNS = [$(QUESTIONS_PATTERNS)]" @$(ECHO) "ANSWERS_PATTERNS = [$(ANSWERS_PATTERNS)]" @$(ECHO) "QUESTION_INSTALL_PATTERNS = [$(QUESTION_INSTALL_PATTERNS)]" @$(ECHO) "ANSWER_INSTALL_PATTERNS = [$(ANSWER_INSTALL_PATTERNS)]" @$(ECHO) "SECTION = [$(SECTION)]" @$(ECHO) "QUESTION_SRC_DIRS = [$(QUESTION_SRC_DIRS)]" @$(ECHO) "ANSWER_SRC_DIRS = [$(ANSWER_SRC_DIRS)]" @$(ECHO) "QUESTION_INSTALL_DIRS = [$(QUESTION_INSTALL_DIRS)]" @$(ECHO) "ANSWER_INSTALL_DIRS = [$(ANSWER_INSTALL_DIRS)]" @$(ECHO) "CLEAN_DIRS = [$(CLEAN_DIRS)]" @$(ECHO) "QUESTION_TEX_SOURCE = [$(QUESTION_TEX_SOURCE)]" @$(ECHO) "ANSWER_TEX_SOURCE = [$(ANSWER_TEX_SOURCE)]" @$(ECHO) "QUESTION_TEX_INPUTS = [$(QUESTION_TEX_INPUTS)]" @$(ECHO) "ANSWER_TEX_INPUTS = [$(ANSWER_TEX_INPUTS)]" @$(ECHO) "INSTALL_DIRECTORY = [$(INSTALL_DIRECTORY)]" @$(ECHO) "INSTALL_FILES = [$(INSTALL_FILES)]" @$(ECHO) "WEB_CLEAN_FILES = [$(WEB_CLEAN_FILES)]" @$(ECHO) "PRINT_CLEAN_FILES = [$(PRINT_CLEAN_FILES)]" @$(ECHO) "ALL_CLEAN_FILES = [$(ALL_CLEAN_FILES)]" ################################################################################ # # Print out the list of targets. Handy for when you forget! # targets: @$(ECHO) $(TARGETS)

Ignore Space Show notes View

make-includes/build_section_rules.make

################################################################################
#
# File: $Id$
#
# Standard variables and rules for building a particular section of the
# handbook. Altering these definitions will affect ALL SECTION MAKEFILES
# FOR ALL PAPERS!! If you need to do something specific for a particular
# paper, include a custom rule in its makefile. DON'T add it here!
#
################################################################################

include $(GLOBAL_HANDBOOK_INCLUDE)/remove_content_marker_files.make

#
# Ensure that the patterns files exist. If they don't, copy the originals
# across from the shared directory and abort the run so that the user can
# edit them appropriately.
#
CHECK_ANSWERS_PATTERNS:=$(shell ($(TEST) -f $(LOCAL_HANDBOOK_INCLUDE)/answers.patterns) || ($(CP) $(TEACHING_SHARED)/Authoring/Handbook/makefile-templates/answers.patterns $(LOCAL_HANDBOOK_INCLUDE); $(ECHO) "answers"))
CHECK_QUESTIONS_PATTERNS:=$(shell ($(TEST) -f $(LOCAL_HANDBOOK_INCLUDE)/questions.patterns) || ($(CP) $(TEACHING_SHARED)/Authoring/Handbook/makefile-templates/questions.patterns $(LOCAL_HANDBOOK_INCLUDE); $(ECHO) "questions"))
CHECK_INSTALL_PATTERNS:=$(shell ($(TEST) -f $(LOCAL_HANDBOOK_INCLUDE)/install.patterns) || ($(CP) $(TEACHING_SHARED)/Authoring/Handbook/makefile-templates/install.patterns $(LOCAL_HANDBOOK_INCLUDE); $(ECHO) "install"))
CHECK_ALL_PATTERNS:=$(CHECK_ANSWERS_PATTERNS) $(CHECK_QUESTIONS_PATTERNS) $(CHECK_INSTALL_PATTERNS)

ifneq "$(strip $(CHECK_ALL_PATTERNS))" ""
$(error Patterns files have been restored from defaults ($(CHECK_ALL_PATTERNS)), please check them before continuing)
endif

endif

# Now that the one-time initialsation is out of the way, ensure that
# NOINIT (the value doesn't matter) is exported to all sub-makefiles to
# prevent them from repeating the one-time initialisation. This prevents
# the situation where we go "make" and content checking happens twice,
# once for the web version and once for the print version. (Although I'm
# not sure why it only happens twice --- I would have expected four times.
# Go figure.)
#
export NOINIT?=x

################################################################################
#
# Include variables defining the current paper.
#
include $(LOCAL_HANDBOOK_INCLUDE)/paper_variables.make

################################################################################
#
# Define patterns for required source files. We define the basic variables
# first (empty), then scan the make-includes directory for patterns files.
# Each patterns file should add its patterns (using +=) to the appropriate
# pattern variable from the following.
#
# QUESTIONS_PATTERNS defines the patterns for the "questions" version of
# the handbook (both web and print).
#
QUESTIONS_PATTERNS:=

#
# ANSWERS_PATTERNS defines the patterns for the "answers" version of
# the handbook (both web and print).
#
ANSWERS_PATTERNS:=

#
# *_INSTALL_PATTERNS defines the patterns for installing on the web server.
#
QUESTION_INSTALL_PATTERNS:=
ANSWER_INSTALL_PATTERNS:=

#
# Now go looking for patterns files in the local make-includes directory.
# files should be named "*.patterns"
#
include $(LOCAL_HANDBOOK_INCLUDE)/*.patterns

################################################################################
#
# Define lists of source directories that contain documents to be included
# in the handbook. These are generated according to the values of the
# patterns defined in the various pattern include files.
#
# Note that all the find commands are relative to the working directory of
# the makefile that includes this file. Thus, if we are in the Tutorials
# directory, all finds will be relative to this (and thus the lab patterns
# won't find anything). The main consequence of this is that the
# CLEAN_DIRS find will only generate a list of the directories that can be
# cleaned _for the current section_. In practice, however, this will still
# work as expected; if we're cleaning just that section, this is what we
# want anyway, and if we're cleaning the entire handbook, the master
# handbook makefile will call the makefile for each section separately.
#
################################################################################
#
# Directories for the complete collection of documents to be built for the
# "questions" and "answers" versions of the handbook, respectively. Since
# the tutorials variables will be empty when we're in the labs directory,
# and vice versa, everything just works!
#
QUESTION_SRC_DIRS:=$(foreach p,$(QUESTIONS_PATTERNS),$(notdir $(shell $(FIND) . -regex '.*/'$(p) | sort)))

ANSWER_SRC_DIRS:=$(foreach p,$(ANSWERS_PATTERNS),$(notdir $(shell $(FIND) . -regex '.*/'$(p) | sort)))

QUESTION_INSTALL_DIRS:=$(foreach p,$(QUESTION_INSTALL_PATTERNS),$(notdir $(shell $(FIND) . -regex '.*/'$(p) | sort)))

ANSWER_INSTALL_DIRS:=$(foreach p,$(ANSWER_INSTALL_PATTERNS),$(notdir $(shell $(FIND) . -regex '.*/'$(p) | sort)))

#
# List of directories that can be cleaned. "-mindepth 2" ensures
# that we only include sub-directories of the current directory.
#
CLEAN_DIRS:=$(dir $(shell $(FIND) . -mindepth 2 -name Makefile))

################################################################################
#
# Define lists of LaTeX source files. These will be written out to the
# appropriate manifest file, so that the master handbook makefile can
# import them into the handbook LaTeX build. Only the files specified by
# the file patterns are included. The manifest file is also only updated
# when necessary, i.e., when the list of files changes.
#
QUESTION_TEX_SOURCE:=$(foreach d,$(QUESTION_SRC_DIRS),$d/$d-questions.tex)
ANSWER_TEX_SOURCE:=$(foreach d,$(ANSWER_SRC_DIRS),$d/$d-answers.tex)

QUESTION_TEX_INPUTS:=$(foreach f,$(QUESTION_TEX_SOURCE),\\input{sections/$(SECTION)/$(basename $f)})
ANSWER_TEX_INPUTS:=$(foreach f,$(ANSWER_TEX_SOURCE),\\input{sections/$(SECTION)/$(basename $f)})

################################################################################
#
# Files to be installed on web server.
#
INSTALL_FILES:=

################################################################################
#
# List of possible targets. If you need to add to this for a specific
# case, use TARGETS+=xxx in the actual makefile.
#
TARGETS:=all targets debug install \
	web web-questions web-answers \
	print print-questions print-answers \
	questions answers \
	print-question-docs print-answer-docs \
	clean web-clean print-clean

.PHONY: $(TARGETS)

################################################################################
#
# Build everything.
#
all: web print

################################################################################
#
# Build questions or answers only.
#
questions: web-questions print-questions

answers: web-answers print-answers

################################################################################
#
# Build web version only.
#
# Note the weird dance with the ifs in the recursive make calls. If we
# don't do this, the foreach just keeps going even if one of the sub-makes
# dies. We therefore have to do our own error detection and dying. Bummer.
#
web: web-questions web-answers

web-questions:
	@$(foreach d,$(QUESTION_SRC_DIRS),if $(MAKE) -C $d web-questions; then $(TRUE); else exit 1; fi;)

web-answers:
	@$(foreach d,$(ANSWER_SRC_DIRS),if $(MAKE) -C $d web-answers; then $(TRUE); else exit 1; fi;)

################################################################################
#
# Build print version only. We also need to build the manifest files that
# will be \input into the master handbook.tex document.
#
print: print-questions print-answers

print-questions: print-question-docs question-manifest.tex

print-question-docs:
	@$(foreach d,$(QUESTION_SRC_DIRS),if $(MAKE) -C $d print-questions; then $(TRUE); else exit 1; fi;)

question-manifest.tex: $(QUESTION_TEX_SOURCE) $(LOCAL_HANDBOOK_INCLUDE)/questions.patterns
	@$(ANNOUNCE) "Generating questions version manifest file in $(SECTION)"
	@$(ECHO) $(QUESTION_TEX_INPUTS) > $@

question-pdfs:
	@$(foreach d,$(QUESTION_SRC_DIRS),if $(MAKE) -C $d $d-questions.pdf $d-questions-2up.pdf; then $(TRUE); else exit 1; fi;)

print-answers: print-answer-docs answer-manifest.tex

print-answer-docs:
	@$(foreach d,$(ANSWER_SRC_DIRS),if $(MAKE) -C $d print-answers; then $(TRUE); else exit 1; fi;)

answer-manifest.tex: $(ANSWER_TEX_SOURCE) $(LOCAL_HANDBOOK_INCLUDE)/answers.patterns
	@$(ANNOUNCE) "Generating answers version manifest file in $(SECTION)"
	@$(ECHO) $(ANSWER_TEX_INPUTS) > $@

answer-pdfs:
	@$(foreach d,$(ANSWER_SRC_DIRS),if $(MAKE) -C $d $d-answers.pdf $d-answers-2up.pdf; then $(TRUE); else exit 1; fi;)

################################################################################
#
# Link the appropriate files to the deployment directory. This relies on the
# environment variable HANDBOOK_INSTALL_DIRECTORY being defined, and
# and that it points to a valid directory. Note that all existing symbolic links
# in the entire section are deleted first. We do this at the section level
# rather than the handbook level because there are other things (like lectures)
# linked into the deployment directory that aren't managed by the handbook
# framework.
#
# Most of the work is carried out by recursive make calls to the
# subordinate document makefiles. Files that are generic to the entire
# section are dealt with here, though. Each file in the build directory is
# checked against the corresponding file in the install directory. The
# local file is only copied to the install directory if it is newer, or
# the remote file doesn't exist. See build_document_rules.make for an
# explanation of why it's implemented using a foreach.
#
install:
	@$(ANNOUNCE) "Creating links in $(SECTION)"
	@$(TEST) -d $(HANDBOOK_INSTALL_ROOT)
	@$(MKDIR_P) $(INSTALL_DIRECTORY)
	@$(FIND) $(INSTALL_DIRECTORY) -type l -delete
	@$(foreach d,$(QUESTION_INSTALL_DIRS),if $(MAKE) -C $d install-questions; then $(TRUE); else exit 1; fi;)
	@$(foreach d,$(ANSWER_INSTALL_DIRS),if $(MAKE) -C $d install-answers; then $(TRUE); else exit 1; fi;)
	@$(foreach f,$(INSTALL_FILES),if $(TEST) ! -f $(INSTALL_DIRECTORY)/$(f) -o $(CURDIR)/$(f) -nt $(INSTALL_DIRECTORY)/$(f); then $(ECHO) "Linking $(f)"; $(LN_S) $(CURDIR)/$(f) $(INSTALL_DIRECTORY); fi;)

################################################################################
#
# Clean up all generated files.
# "web-clean" and "print-clean" only clean up files for the web and print
# versions, respectively. Note that "clean" isn't dependent on either
# "web-clean" or "print-clean", to ensure that the correct target is
# used when calling the sub-makefile.
#
clean:
	@$(foreach d,$(CLEAN_DIRS),$(MAKE) -C $d $@;)
ifneq ($(strip $(ALL_CLEAN_FILES)),)
	-$(RM) -f $(ALL_CLEAN_FILES)
endif

web-clean:
	@$(foreach d,$(CLEAN_DIRS),$(MAKE) -C $d $@;)
ifneq ($(strip $(WEB_CLEAN_FILES)),)
	-$(RM) -f $(WEB_CLEAN_FILES)
endif

print-clean:
	@$(foreach d,$(CLEAN_DIRS),$(MAKE) -C $d $@;)
ifneq ($(strip $(PRINT_CLEAN_FILES)),)
	-$(RM) -f $(PRINT_CLEAN_FILES)
endif

#
# "init-clean" is a dummy target that can be used to ensure that the
# content-checked marker files get deleted. Do a "make -C xxx" (i.e.,
# don't define NOINIT). The actual deletion is done by the one-time
# initialisation in remove_content_marker_files.make. Note that there's no
# point in this rule printing anything, because the output will probably
# end up buried in a one-time initialisation "variable".
#
init-clean:

################################################################################
#
# Debugging information, mostly lists of the generated variables.
#
debug:
	@$(ANNOUNCE) Externally defined variables
	@$(ECHO) "TEACHING_SHARED = [$(TEACHING_SHARED)]"
	@$(ECHO) "HANDBOOK_INSTALL_ROOT = [$(HANDBOOK_INSTALL_ROOT)]"
	@$(ECHO) "NOINIT = [$(NOINIT)]"
	@$(ANNOUNCE) Internally defined variables
	@$(ECHO) "GLOBAL_HANDBOOK_INCLUDE = [$(GLOBAL_HANDBOOK_INCLUDE)]"
	@$(ECHO) "LOCAL_HANDBOOK_INCLUDE = [$(LOCAL_HANDBOOK_INCLUDE)]"
	@$(ECHO) "QUESTIONS_PATTERNS = [$(QUESTIONS_PATTERNS)]"
	@$(ECHO) "ANSWERS_PATTERNS = [$(ANSWERS_PATTERNS)]"
	@$(ECHO) "QUESTION_INSTALL_PATTERNS = [$(QUESTION_INSTALL_PATTERNS)]"
	@$(ECHO) "ANSWER_INSTALL_PATTERNS = [$(ANSWER_INSTALL_PATTERNS)]"
	@$(ECHO) "SECTION = [$(SECTION)]"
	@$(ECHO) "QUESTION_SRC_DIRS = [$(QUESTION_SRC_DIRS)]"
	@$(ECHO) "ANSWER_SRC_DIRS = [$(ANSWER_SRC_DIRS)]"
	@$(ECHO) "QUESTION_INSTALL_DIRS = [$(QUESTION_INSTALL_DIRS)]"
	@$(ECHO) "ANSWER_INSTALL_DIRS = [$(ANSWER_INSTALL_DIRS)]"
	@$(ECHO) "CLEAN_DIRS = [$(CLEAN_DIRS)]"
	@$(ECHO) "QUESTION_TEX_SOURCE = [$(QUESTION_TEX_SOURCE)]"
	@$(ECHO) "ANSWER_TEX_SOURCE = [$(ANSWER_TEX_SOURCE)]"
	@$(ECHO) "QUESTION_TEX_INPUTS = [$(QUESTION_TEX_INPUTS)]"
	@$(ECHO) "ANSWER_TEX_INPUTS = [$(ANSWER_TEX_INPUTS)]"
	@$(ECHO) "INSTALL_DIRECTORY = [$(INSTALL_DIRECTORY)]"
	@$(ECHO) "INSTALL_FILES = [$(INSTALL_FILES)]"
	@$(ECHO) "WEB_CLEAN_FILES = [$(WEB_CLEAN_FILES)]"
	@$(ECHO) "PRINT_CLEAN_FILES = [$(PRINT_CLEAN_FILES)]"
	@$(ECHO) "ALL_CLEAN_FILES = [$(ALL_CLEAN_FILES)]"