• Switched to using \def instead of \newcommand for pre-\begin{document} definitions, as it seems safer.

nigel.stanger / Handbook

Browse code • Switched to using \def instead of \newcommand for pre-\begin{document} definitions, as it seems safer. master
1 parent 1e06121 commit 0f39cd632f70f83e94d240a90213dee4e7bd8a56 Nigel Stanger authored on 25 Feb 2014

Patch

Showing 2 changed files

Ignore Space Show notes View make-includes/standard_rules.make
################################################################################ # # Standard rules for a variety of situations. Includes standard suffixes and # paths. # # ################################################################################ ################################################################################ # # Required make variables. These should be defined by the calling makefile. # # PAPER_NUMBER # The paper number for the current paper, e.g., 212. # PAPER_NUMBER?=$(error The required make variable PAPER_NUMBER has not been defined. Please set it to the correct value) # # IMGDIR # The path to the directory that contains images, e.g., images. # IMGDIR?=$(error The required make variable IMGDIR has not been defined. Please set it to the directory in which images are located) ################################################################################ # # Default rules. # # # PDF from LaTeX via DVI, typically for images drawn using PSTricks). # %.pdf %-print.pdf: $(IMGDIR)/%.tex $(LATEX) --jobname=$(IMGDIR)/$* $< $(DVIPS) -q -f $(IMGDIR)/$* \| $(PS2EPS) --quiet --loose \| $(EPSTOPDF) --filter --outfile=$(IMGDIR)/$@ # # PDF from LaTeX. # %.pdf: %.tex ifdef UNICODE $(XELATEX) --jobname=$(basename $<) '\def\LaTeXOptions{$(LATEX_OPTS)}\input{$<}' $(XELATEX) --jobname=$(basename $<) '\def\LaTeXOptions{$(LATEX_OPTS)}\input{$<}' else $(PDFLATEX) --jobname=$(basename $<) '\def\LaTeXOptions{$(LATEX_OPTS)}\input{$<}' $(PDFLATEX) --jobname=$(basename $<) '\def\LaTeXOptions{$(LATEX_OPTS)}\input{$<}' endif # # 2-up PDF from 1-up PDF. # %-2up.pdf: %.pdf $(PDFNUP) $< --nup 2x1 --outfile $@ # # Derived XML with inclusions from source XML without inclusions. # # This is done by simply running the original source through xmllint # with the --xinclude option to process any xi:include elements. # The result of this could just be piped into the XSLT processor, # except that (a) not all of the processors support input from stdin, # and (b) combining both xmllint and XSLT processing into one command # means that make won't stop if there's any errors from xmllint. # # Sed is used to add a comment to the derived XML file, warning that this # is generated and shouldn't be edited. Sed was used because the <?xml?> # processing instruction MUST be on the first line. The implication here # is that all input source files have an <?xml?> processing instruction # (which they should anyway). # %-derived.xml: %.xml $(XMLLINT) --xinclude $< > $@ @$(SED) --in-place --expression='1a <!-- THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT! -->' $@ # # LaTeX from derived XML. # %.tex: %-derived.xml ifdef UNICODE $(call xslt,$<,xml2xelatex.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,period-code,'$(PAPER_PERIOD)')) > $@ else $(call xslt,$<,xml2latex.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,period-code,'$(PAPER_PERIOD)')) > $@ endif # # HTML from derived XML. # %.html: %-derived.xml ifdef UNICODE $(call xslt,$<,xml2xhtml.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,period-code,'$(PAPER_PERIOD)')) > $@ else $(call xslt,$<,xml2html.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,period-code,'$(PAPER_PERIOD)')) > $@ endif # # Image rules can be a bit messy, because the prerequisite might be in any one # of several different formats, but we want to apply the same commands anyway # (e.g., ImageMagick convert) to generate the target. It would be nice if we # could specify variable file types in a prerequisite of a pattern rule (e.g., # %-foo.png: %.png %.jpg %.tif), but unfortunately we can't :(. The solution is # to create a make function to refactor the commands, and then specify as many # rules as required depending on the number of file formats. We still end up # repeating the rule actions, but at least the guts of the action is coded only # once in the function. # # PNG from TIFF, JPEG, PICT (normal image) # Note: PNG prerequisites are dealt with further down. # convert_normal = $(CONVERT) "$(1)" "$(2)" %.png %-print.png %-web.png: %.tif $(call convert_normal,$<,$(IMGDIR)/$@) %.png %-print.png %-web.png: %.jpg $(call convert_normal,$<,$(IMGDIR)/$@) %.png %-print.png %-web.png: %.pict $(call convert_normal,$<,$(IMGDIR)/$@) # # PNG from PNG, TIFF, JPEG, PICT (slide background) # # We lighten these so that they don't overwhelm the text. Note that 15% is # too light for most data projectors, so let's try 33% and see what # happens... (this looks far too much on screen, but data projectors tend # to wash things out much, much more). # # Includes both blurred and unblurred versions, use as required. # # Unblurred: convert_bg = $(CONVERT) "$(1)" -threshold "-1" -depth 16 - \| $(COMPOSITE) -dissolve 33% "$(1)" - "$(2)" %-BG.png: %.tif $(call convert_bg,$<,$(IMGDIR)/$@) %-BG.png: %.png $(call convert_bg,$<,$(IMGDIR)/$@) %-BG.png: %.jpg $(call convert_bg,$<,$(IMGDIR)/$@) %-BG.png: %.pict $(call convert_bg,$<,$(IMGDIR)/$@) # # Blurred: convert_bg_blur = $(CONVERT) -blur 0.5 "$(1)" "$(2)"; $(CONVERT) "$(2)" -threshold "-1" -depth 16 - \| $(COMPOSITE) -dissolve 33% "$(2)" - "$(3)"; rm -f "$(2)" %-BG-blur.png: %.tif $(call convert_bg_blur,$<,$(IMGDIR)/$-tmp.png,$(IMGDIR)/$@) %-BG-blur.png: %.png $(call convert_bg_blur,$<,$(IMGDIR)/$-tmp.png,$(IMGDIR)/$@) %-BG-blur.png: %.jpg $(call convert_bg_blur,$<,$(IMGDIR)/$-tmp.png,$(IMGDIR)/$@) %-BG-blur.png: %.pict $(call convert_bg_blur,$<,$(IMGDIR)/$-tmp.png,$(IMGDIR)/$@) # # PNG from XCF. # %.png: %.xcf $(XCF2PNG) -o $(IMGDIR)/$@ $< # # PNG from EPS. # %.png %-print.png %-web.png: %.eps $(PS2EPS) --ignoreBB --nohires --loose --gsbbox < $< \| \ $(GS) -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=png16m -dEPSCrop -r96 \ -dTextAlphaBits=4 -dGraphicsAlphaBits=4 -sOutputFile=$(IMGDIR)/$@ - %-web-zoom.png: %.eps $(PS2EPS) --ignoreBB --nohires --loose --gsbbox < $< \| \ $(GS) -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=png16m -dEPSCrop -r144 \ -dTextAlphaBits=4 -dGraphicsAlphaBits=4 -sOutputFile=$(IMGDIR)/$@ - # # PNG from PS. # %-web.png: %.ps @$(PS2EPS) --ignoreBB --nohires --loose --gsbbox < $< \| \ $(GS) -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=png16m -dEPSCrop -r96 \ -dTextAlphaBits=4 -dGraphicsAlphaBits=4 -sOutputFile=$(IMGDIR)/$@ - %-web-zoom.png: %.ps @$(PS2EPS) --ignoreBB --nohires --loose --gsbbox < $< \| \ $(GS) -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=png16m -dEPSCrop -r144 \ -dTextAlphaBits=4 -dGraphicsAlphaBits=4 -sOutputFile=$(IMGDIR)/$@ - # # PNG from PDF. # %-web.png: %.pdf $(GS) -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=png16m -r96 \ -dTextAlphaBits=4 -dGraphicsAlphaBits=4 -sOutputFile=$(IMGDIR)/$@ $< %-web-zoom.png: %.pdf $(GS) -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=png16m -r144 \ -dTextAlphaBits=4 -dGraphicsAlphaBits=4 -sOutputFile=$(IMGDIR)/$@ $< # # PDF from Ploticus. # %.pdf %-print.pdf: %.plo $(PLOTICUS) -eps -tightcrop -o stdout $< \| $(SHIFTBBOX) \| $(EPSTOPDF) --filter --outfile=$(IMGDIR)/$@ # # PDF from R. # This assumes that the first argument to the R script is the output filename # for the resultant PDF. # %.pdf %-print.pdf: %.R $(R) --slave --file=$< --args "$(IMGDIR)/$@" $(PDFCROP) $(IMGDIR)/$@ $(IMGDIR)/$-crop.pdf -$(MV) $(IMGDIR)/$-crop.pdf $(IMGDIR)/$@ # # PDF from PS # %.pdf %-print.pdf: %.ps $(PS2EPS) --quiet --ignoreBB --nohires --loose < $< \| $(EPSTOPDF) --filter --outfile=$(IMGDIR)/$@ # # PDF from EPS # %.pdf %-print.pdf: %.eps $(EPSTOPDF) --outfile=$(IMGDIR)/$@ $< # $(PS2EPS) --ignoreBB --nohires --loose < $< \| $(PS2PDF) -dEPSCrop - $(IMGDIR)/$@ # # PDF from SVG (via Inkscape) # The --export-area-drawing option now appears to behave correctly with # PDFs (previously it over-cropped slightly). # %.pdf %-print.pdf: %.svg $(INKSCAPE) --file=$< --without-gui --export-area-drawing --export-text-to-path --export-pdf=$(IMGDIR)/$@ # # PNG from SVG (via Inkscape) # %.png %-print.png %-web.png: %.svg $(INKSCAPE) --file=$< --without-gui --export-area-drawing --export-background-opacity=1.0 --export-dpi=96 --export-png=$(IMGDIR)/$@ %-web-zoom.png: %.svg $(INKSCAPE) --file=$< --without-gui --export-area-drawing --export-background-opacity=1.0 --export-dpi=144 --export-png=$(IMGDIR)/$@ %-print-zoom.png: %.svg $(INKSCAPE) --file=$< --without-gui --export-area-drawing --export-background-opacity=1.0 --export-dpi=300 --export-png=$(IMGDIR)/$@ %-print-zoom-transparent.png: %.svg $(INKSCAPE) --file=$< --without-gui --export-area-drawing --export-background-opacity=0 --export-dpi=300 --export-png=$(IMGDIR)/$@ %-transparent.png: %.svg $(INKSCAPE) --file=$< --without-gui --export-area-drawing --export-background-opacity=0 --export-dpi=96 --export-png=$(IMGDIR)/$@ # # PNG from PNG (change the name). # These appear to need to be separate rules. If both variants need to be # created (i.e., both %-web.png and %-print.png), it only generates one of # them (most likely %-web.png as it's first in the rule) if the rules are # combined into one. This is Kind of Weird. # %-print.png: %.png $(CP) $< $(IMGDIR)/$@ %-web.png: %.png $(CP) $< $(IMGDIR)/$@ # # CSS from Sass (both syntaxes). # %.css: %.sass $(SASS) $< $@ %.css: %.scss $(SASS) $< $@ ################################################################################ # # Standard rules for a variety of situations. Includes standard suffixes and # paths. # # ################################################################################ ################################################################################ # # Required make variables. These should be defined by the calling makefile. # # PAPER_NUMBER # The paper number for the current paper, e.g., 212. # PAPER_NUMBER?=$(error The required make variable PAPER_NUMBER has not been defined. Please set it to the correct value) # # IMGDIR # The path to the directory that contains images, e.g., images. # IMGDIR?=$(error The required make variable IMGDIR has not been defined. Please set it to the directory in which images are located) ################################################################################ # # Default rules. # # # PDF from LaTeX via DVI, typically for images drawn using PSTricks). # %.pdf %-print.pdf: $(IMGDIR)/%.tex $(LATEX) --jobname=$(IMGDIR)/$* $< $(DVIPS) -q -f $(IMGDIR)/$* \| $(PS2EPS) --quiet --loose \| $(EPSTOPDF) --filter --outfile=$(IMGDIR)/$@ # # PDF from LaTeX. # %.pdf: %.tex ifdef UNICODE $(XELATEX) --jobname=$(basename $<) '\newcommand{\LaTeXOptions}{$(LATEX_OPTS)}\input{$<}' $(XELATEX) --jobname=$(basename $<) '\newcommand{\LaTeXOptions}{$(LATEX_OPTS)}\input{$<}' else $(PDFLATEX) --jobname=$(basename $<) '\newcommand{\LaTeXOptions}{$(LATEX_OPTS)}\input{$<}' $(PDFLATEX) --jobname=$(basename $<) '\newcommand{\LaTeXOptions}{$(LATEX_OPTS)}\input{$<}' endif # # 2-up PDF from 1-up PDF. # %-2up.pdf: %.pdf $(PDFNUP) $< --nup 2x1 --outfile $@ # # Derived XML with inclusions from source XML without inclusions. # # This is done by simply running the original source through xmllint # with the --xinclude option to process any xi:include elements. # The result of this could just be piped into the XSLT processor, # except that (a) not all of the processors support input from stdin, # and (b) combining both xmllint and XSLT processing into one command # means that make won't stop if there's any errors from xmllint. # # Sed is used to add a comment to the derived XML file, warning that this # is generated and shouldn't be edited. Sed was used because the <?xml?> # processing instruction MUST be on the first line. The implication here # is that all input source files have an <?xml?> processing instruction # (which they should anyway). # %-derived.xml: %.xml $(XMLLINT) --xinclude $< > $@ @$(SED) --in-place --expression='1a <!-- THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT! -->' $@ # # LaTeX from derived XML. # %.tex: %-derived.xml ifdef UNICODE $(call xslt,$<,xml2xelatex.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,period-code,'$(PAPER_PERIOD)')) > $@ else $(call xslt,$<,xml2latex.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,period-code,'$(PAPER_PERIOD)')) > $@ endif # # HTML from derived XML. # %.html: %-derived.xml ifdef UNICODE $(call xslt,$<,xml2xhtml.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,period-code,'$(PAPER_PERIOD)')) > $@ else $(call xslt,$<,xml2html.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,period-code,'$(PAPER_PERIOD)')) > $@ endif # # Image rules can be a bit messy, because the prerequisite might be in any one # of several different formats, but we want to apply the same commands anyway # (e.g., ImageMagick convert) to generate the target. It would be nice if we # could specify variable file types in a prerequisite of a pattern rule (e.g., # %-foo.png: %.png %.jpg %.tif), but unfortunately we can't :(. The solution is # to create a make function to refactor the commands, and then specify as many # rules as required depending on the number of file formats. We still end up # repeating the rule actions, but at least the guts of the action is coded only # once in the function. # # PNG from TIFF, JPEG, PICT (normal image) # Note: PNG prerequisites are dealt with further down. # convert_normal = $(CONVERT) "$(1)" "$(2)" %.png %-print.png %-web.png: %.tif $(call convert_normal,$<,$(IMGDIR)/$@) %.png %-print.png %-web.png: %.jpg $(call convert_normal,$<,$(IMGDIR)/$@) %.png %-print.png %-web.png: %.pict $(call convert_normal,$<,$(IMGDIR)/$@) # # PNG from PNG, TIFF, JPEG, PICT (slide background) # # We lighten these so that they don't overwhelm the text. Note that 15% is # too light for most data projectors, so let's try 33% and see what # happens... (this looks far too much on screen, but data projectors tend # to wash things out much, much more). # # Includes both blurred and unblurred versions, use as required. # # Unblurred: convert_bg = $(CONVERT) "$(1)" -threshold "-1" -depth 16 - \| $(COMPOSITE) -dissolve 33% "$(1)" - "$(2)" %-BG.png: %.tif $(call convert_bg,$<,$(IMGDIR)/$@) %-BG.png: %.png $(call convert_bg,$<,$(IMGDIR)/$@) %-BG.png: %.jpg $(call convert_bg,$<,$(IMGDIR)/$@) %-BG.png: %.pict $(call convert_bg,$<,$(IMGDIR)/$@) # # Blurred: convert_bg_blur = $(CONVERT) -blur 0.5 "$(1)" "$(2)"; $(CONVERT) "$(2)" -threshold "-1" -depth 16 - \| $(COMPOSITE) -dissolve 33% "$(2)" - "$(3)"; rm -f "$(2)" %-BG-blur.png: %.tif $(call convert_bg_blur,$<,$(IMGDIR)/$-tmp.png,$(IMGDIR)/$@) %-BG-blur.png: %.png $(call convert_bg_blur,$<,$(IMGDIR)/$-tmp.png,$(IMGDIR)/$@) %-BG-blur.png: %.jpg $(call convert_bg_blur,$<,$(IMGDIR)/$-tmp.png,$(IMGDIR)/$@) %-BG-blur.png: %.pict $(call convert_bg_blur,$<,$(IMGDIR)/$-tmp.png,$(IMGDIR)/$@) # # PNG from XCF. # %.png: %.xcf $(XCF2PNG) -o $(IMGDIR)/$@ $< # # PNG from EPS. # %.png %-print.png %-web.png: %.eps $(PS2EPS) --ignoreBB --nohires --loose --gsbbox < $< \| \ $(GS) -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=png16m -dEPSCrop -r96 \ -dTextAlphaBits=4 -dGraphicsAlphaBits=4 -sOutputFile=$(IMGDIR)/$@ - %-web-zoom.png: %.eps $(PS2EPS) --ignoreBB --nohires --loose --gsbbox < $< \| \ $(GS) -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=png16m -dEPSCrop -r144 \ -dTextAlphaBits=4 -dGraphicsAlphaBits=4 -sOutputFile=$(IMGDIR)/$@ - # # PNG from PS. # %-web.png: %.ps @$(PS2EPS) --ignoreBB --nohires --loose --gsbbox < $< \| \ $(GS) -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=png16m -dEPSCrop -r96 \ -dTextAlphaBits=4 -dGraphicsAlphaBits=4 -sOutputFile=$(IMGDIR)/$@ - %-web-zoom.png: %.ps @$(PS2EPS) --ignoreBB --nohires --loose --gsbbox < $< \| \ $(GS) -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=png16m -dEPSCrop -r144 \ -dTextAlphaBits=4 -dGraphicsAlphaBits=4 -sOutputFile=$(IMGDIR)/$@ - # # PNG from PDF. # %-web.png: %.pdf $(GS) -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=png16m -r96 \ -dTextAlphaBits=4 -dGraphicsAlphaBits=4 -sOutputFile=$(IMGDIR)/$@ $< %-web-zoom.png: %.pdf $(GS) -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=png16m -r144 \ -dTextAlphaBits=4 -dGraphicsAlphaBits=4 -sOutputFile=$(IMGDIR)/$@ $< # # PDF from Ploticus. # %.pdf %-print.pdf: %.plo $(PLOTICUS) -eps -tightcrop -o stdout $< \| $(SHIFTBBOX) \| $(EPSTOPDF) --filter --outfile=$(IMGDIR)/$@ # # PDF from R. # This assumes that the first argument to the R script is the output filename # for the resultant PDF. # %.pdf %-print.pdf: %.R $(R) --slave --file=$< --args "$(IMGDIR)/$@" $(PDFCROP) $(IMGDIR)/$@ $(IMGDIR)/$-crop.pdf -$(MV) $(IMGDIR)/$-crop.pdf $(IMGDIR)/$@ # # PDF from PS # %.pdf %-print.pdf: %.ps $(PS2EPS) --quiet --ignoreBB --nohires --loose < $< \| $(EPSTOPDF) --filter --outfile=$(IMGDIR)/$@ # # PDF from EPS # %.pdf %-print.pdf: %.eps $(EPSTOPDF) --outfile=$(IMGDIR)/$@ $< # $(PS2EPS) --ignoreBB --nohires --loose < $< \| $(PS2PDF) -dEPSCrop - $(IMGDIR)/$@ # # PDF from SVG (via Inkscape) # The --export-area-drawing option now appears to behave correctly with # PDFs (previously it over-cropped slightly). # %.pdf %-print.pdf: %.svg $(INKSCAPE) --file=$< --without-gui --export-area-drawing --export-text-to-path --export-pdf=$(IMGDIR)/$@ # # PNG from SVG (via Inkscape) # %.png %-print.png %-web.png: %.svg $(INKSCAPE) --file=$< --without-gui --export-area-drawing --export-background-opacity=1.0 --export-dpi=96 --export-png=$(IMGDIR)/$@ %-web-zoom.png: %.svg $(INKSCAPE) --file=$< --without-gui --export-area-drawing --export-background-opacity=1.0 --export-dpi=144 --export-png=$(IMGDIR)/$@ %-print-zoom.png: %.svg $(INKSCAPE) --file=$< --without-gui --export-area-drawing --export-background-opacity=1.0 --export-dpi=300 --export-png=$(IMGDIR)/$@ %-print-zoom-transparent.png: %.svg $(INKSCAPE) --file=$< --without-gui --export-area-drawing --export-background-opacity=0 --export-dpi=300 --export-png=$(IMGDIR)/$@ %-transparent.png: %.svg $(INKSCAPE) --file=$< --without-gui --export-area-drawing --export-background-opacity=0 --export-dpi=96 --export-png=$(IMGDIR)/$@ # # PNG from PNG (change the name). # These appear to need to be separate rules. If both variants need to be # created (i.e., both %-web.png and %-print.png), it only generates one of # them (most likely %-web.png as it's first in the rule) if the rules are # combined into one. This is Kind of Weird. # %-print.png: %.png $(CP) $< $(IMGDIR)/$@ %-web.png: %.png $(CP) $< $(IMGDIR)/$@ # # CSS from Sass (both syntaxes). # %.css: %.sass $(SASS) $< $@ %.css: %.scss $(SASS) $< $@

Ignore Space Show notes View

make-includes/standard_rules.make

################################################################################
#
# Standard rules for a variety of situations. Includes standard suffixes and
# paths.
# 
#
################################################################################

################################################################################
#
# Required make variables. These should be defined by the calling makefile.
#
# PAPER_NUMBER
#	The paper number for the current paper, e.g., 212.
#
PAPER_NUMBER?=$(error The required make variable PAPER_NUMBER has not been defined. Please set it to the correct value)
#
# IMGDIR
#	The path to the directory that contains images, e.g., images.
#
IMGDIR?=$(error The required make variable IMGDIR has not been defined. Please set it to the directory in which images are located)

################################################################################
#
# Default rules.
#
#
# PDF from LaTeX via DVI, typically for images drawn using PSTricks).
# 
%.pdf %-print.pdf: $(IMGDIR)/%.tex
	$(LATEX) --jobname=$(IMGDIR)/$* $<
	$(DVIPS) -q -f $(IMGDIR)/$* | $(PS2EPS) --quiet --loose | $(EPSTOPDF) --filter --outfile=$(IMGDIR)/$@
#
# PDF from LaTeX.
#
%.pdf: %.tex
ifdef UNICODE
	$(XELATEX) --jobname=$(basename $<) '\def\LaTeXOptions{$(LATEX_OPTS)}\input{$<}'
	$(XELATEX) --jobname=$(basename $<) '\def\LaTeXOptions{$(LATEX_OPTS)}\input{$<}'
else
	$(PDFLATEX) --jobname=$(basename $<) '\def\LaTeXOptions{$(LATEX_OPTS)}\input{$<}'
	$(PDFLATEX) --jobname=$(basename $<) '\def\LaTeXOptions{$(LATEX_OPTS)}\input{$<}'
endif
#
# 2-up PDF from 1-up PDF.
#
%-2up.pdf: %.pdf
	$(PDFNUP) $< --nup 2x1 --outfile $@
#
# Derived XML with inclusions from source XML without inclusions.
#
# This is done by simply running the original source through xmllint
# with the --xinclude option to process any xi:include elements.
# The result of this could just be piped into the XSLT processor,
# except that (a) not all of the processors support input from stdin,
# and (b) combining both xmllint and XSLT processing into one command
# means that make won't stop if there's any errors from xmllint.
#
# Sed is used to add a comment to the derived XML file, warning that this
# is generated and shouldn't be edited. Sed was used because the <?xml?>
# processing instruction MUST be on the first line. The implication here
# is that all input source files have an <?xml?> processing instruction
# (which they should anyway).
#
%-derived.xml: %.xml
	$(XMLLINT) --xinclude $< > $@
	@$(SED) --in-place --expression='1a ' $@
#
# LaTeX from derived XML.
#
%.tex: %-derived.xml
ifdef UNICODE
	$(call xslt,$<,xml2xelatex.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,period-code,'$(PAPER_PERIOD)')) > $@
else
	$(call xslt,$<,xml2latex.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,period-code,'$(PAPER_PERIOD)')) > $@
endif
#
# HTML from derived XML.
#
%.html: %-derived.xml
ifdef UNICODE
	$(call xslt,$<,xml2xhtml.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,period-code,'$(PAPER_PERIOD)')) > $@
else
	$(call xslt,$<,xml2html.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,period-code,'$(PAPER_PERIOD)')) > $@
endif
#
# Image rules can be a bit messy, because the prerequisite might be in any one
# of several different formats, but we want to apply the same commands anyway
# (e.g., ImageMagick convert) to generate the target. It would be nice if we
# could specify variable file types in a prerequisite of a pattern rule (e.g.,
# %-foo.png: %.png %.jpg %.tif), but unfortunately we can't :(. The solution is
# to create a make function to refactor the commands, and then specify as many
# rules as required depending on the number of file formats. We still end up
# repeating the rule actions, but at least the guts of the action is coded only
# once in the function.
#
# PNG from TIFF, JPEG, PICT (normal image)
# Note: PNG prerequisites are dealt with further down.
#
convert_normal = $(CONVERT) "$(1)" "$(2)"

%.png %-print.png %-web.png: %.tif
	$(call convert_normal,$<,$(IMGDIR)/$@)

%.png %-print.png %-web.png: %.jpg
	$(call convert_normal,$<,$(IMGDIR)/$@)

%.png %-print.png %-web.png: %.pict
	$(call convert_normal,$<,$(IMGDIR)/$@)
#
# PNG from PNG, TIFF, JPEG, PICT (slide background)
#
# We lighten these so that they don't overwhelm the text. Note that 15% is
# too light for most data projectors, so let's try 33% and see what
# happens... (this looks far too much on screen, but data projectors tend
# to wash things out much, much more).
#
# Includes both blurred and unblurred versions, use as required.
#
# Unblurred:
convert_bg = $(CONVERT) "$(1)" -threshold "-1" -depth 16 - | $(COMPOSITE) -dissolve 33% "$(1)" - "$(2)"

%-BG.png: %.tif
	$(call convert_bg,$<,$(IMGDIR)/$@)

%-BG.png: %.png
	$(call convert_bg,$<,$(IMGDIR)/$@)

%-BG.png: %.jpg
	$(call convert_bg,$<,$(IMGDIR)/$@)

%-BG.png: %.pict
	$(call convert_bg,$<,$(IMGDIR)/$@)
#
# Blurred:
convert_bg_blur = $(CONVERT) -blur 0.5 "$(1)" "$(2)"; $(CONVERT) "$(2)" -threshold "-1" -depth 16 - | $(COMPOSITE) -dissolve 33% "$(2)" - "$(3)"; rm -f "$(2)"

%-BG-blur.png: %.tif
	$(call convert_bg_blur,$<,$(IMGDIR)/$*-tmp.png,$(IMGDIR)/$@)

%-BG-blur.png: %.png
	$(call convert_bg_blur,$<,$(IMGDIR)/$*-tmp.png,$(IMGDIR)/$@)

%-BG-blur.png: %.jpg
	$(call convert_bg_blur,$<,$(IMGDIR)/$*-tmp.png,$(IMGDIR)/$@)

%-BG-blur.png: %.pict
	$(call convert_bg_blur,$<,$(IMGDIR)/$*-tmp.png,$(IMGDIR)/$@)
#
# PNG from XCF.
#
%.png: %.xcf
	$(XCF2PNG) -o $(IMGDIR)/$@ $<
#
# PNG from EPS.
#
%.png %-print.png %-web.png: %.eps
	$(PS2EPS) --ignoreBB --nohires --loose --gsbbox < $< | \
		$(GS) -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=png16m -dEPSCrop -r96 \
		-dTextAlphaBits=4 -dGraphicsAlphaBits=4 -sOutputFile=$(IMGDIR)/$@ -

%-web-zoom.png: %.eps
	$(PS2EPS) --ignoreBB --nohires --loose --gsbbox < $< | \
		$(GS) -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=png16m -dEPSCrop -r144 \
		-dTextAlphaBits=4 -dGraphicsAlphaBits=4 -sOutputFile=$(IMGDIR)/$@ -
#
# PNG from PS.
#
%-web.png: %.ps
	@$(PS2EPS) --ignoreBB --nohires --loose --gsbbox < $< | \
		$(GS) -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=png16m -dEPSCrop -r96 \
		-dTextAlphaBits=4 -dGraphicsAlphaBits=4 -sOutputFile=$(IMGDIR)/$@ -

%-web-zoom.png: %.ps
	@$(PS2EPS) --ignoreBB --nohires --loose --gsbbox < $< | \
		$(GS) -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=png16m -dEPSCrop -r144 \
		-dTextAlphaBits=4 -dGraphicsAlphaBits=4 -sOutputFile=$(IMGDIR)/$@ -
#
# PNG from PDF.
#
%-web.png: %.pdf
	$(GS) -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=png16m -r96 \
		-dTextAlphaBits=4 -dGraphicsAlphaBits=4 -sOutputFile=$(IMGDIR)/$@ $<

%-web-zoom.png: %.pdf
	$(GS) -q -dNOPAUSE -dBATCH -dSAFER -sDEVICE=png16m -r144 \
		-dTextAlphaBits=4 -dGraphicsAlphaBits=4 -sOutputFile=$(IMGDIR)/$@ $<
#
# PDF from Ploticus.
#
%.pdf %-print.pdf: %.plo
	$(PLOTICUS) -eps -tightcrop -o stdout $< | $(SHIFTBBOX) | $(EPSTOPDF) --filter --outfile=$(IMGDIR)/$@
#
# PDF from R.
# This assumes that the first argument to the R script is the output filename
# for the resultant PDF.
#
%.pdf %-print.pdf: %.R
	$(R) --slave --file=$< --args "$(IMGDIR)/$@"
	$(PDFCROP) $(IMGDIR)/$@ $(IMGDIR)/$*-crop.pdf
	-$(MV) $(IMGDIR)/$*-crop.pdf $(IMGDIR)/$@
#
# PDF from PS
#
%.pdf %-print.pdf: %.ps
	$(PS2EPS) --quiet --ignoreBB --nohires --loose < $< | $(EPSTOPDF) --filter --outfile=$(IMGDIR)/$@
#
# PDF from EPS
#
%.pdf %-print.pdf: %.eps
	$(EPSTOPDF) --outfile=$(IMGDIR)/$@ $<
# 	$(PS2EPS) --ignoreBB --nohires --loose < $< | $(PS2PDF) -dEPSCrop - $(IMGDIR)/$@
#
# PDF from SVG (via Inkscape)
# The --export-area-drawing option now appears to behave correctly with
# PDFs (previously it over-cropped slightly).
#
%.pdf %-print.pdf: %.svg
	$(INKSCAPE) --file=$< --without-gui --export-area-drawing --export-text-to-path --export-pdf=$(IMGDIR)/$@
#
# PNG from SVG (via Inkscape)
#
%.png %-print.png %-web.png: %.svg
	$(INKSCAPE) --file=$< --without-gui --export-area-drawing --export-background-opacity=1.0 --export-dpi=96 --export-png=$(IMGDIR)/$@

%-web-zoom.png: %.svg
	$(INKSCAPE) --file=$< --without-gui --export-area-drawing --export-background-opacity=1.0 --export-dpi=144 --export-png=$(IMGDIR)/$@

%-print-zoom.png: %.svg
	$(INKSCAPE) --file=$< --without-gui --export-area-drawing --export-background-opacity=1.0 --export-dpi=300 --export-png=$(IMGDIR)/$@

%-print-zoom-transparent.png: %.svg
	$(INKSCAPE) --file=$< --without-gui --export-area-drawing --export-background-opacity=0 --export-dpi=300 --export-png=$(IMGDIR)/$@

%-transparent.png: %.svg
	$(INKSCAPE) --file=$< --without-gui --export-area-drawing --export-background-opacity=0 --export-dpi=96 --export-png=$(IMGDIR)/$@
#
# PNG from PNG (change the name).
# These appear to need to be separate rules. If both variants need to be
# created (i.e., both %-web.png and %-print.png), it only generates one of
# them (most likely %-web.png as it's first in the rule) if the rules are
# combined into one. This is Kind of Weird.
#
%-print.png: %.png
	$(CP) $< $(IMGDIR)/$@

%-web.png: %.png
	$(CP) $< $(IMGDIR)/$@
#
# CSS from Sass (both syntaxes).
#
%.css: %.sass
	$(SASS) $< $@

%.css: %.scss
	$(SASS) $< $@

################################################################################
#
# Default rules.
#
#
# PDF from LaTeX via DVI, typically for images drawn using PSTricks).
# 
%.pdf %-print.pdf: $(IMGDIR)/%.tex
	$(LATEX) --jobname=$(IMGDIR)/$* $<
	$(DVIPS) -q -f $(IMGDIR)/$* | $(PS2EPS) --quiet --loose | $(EPSTOPDF) --filter --outfile=$(IMGDIR)/$@
#
# PDF from LaTeX.
#
%.pdf: %.tex
ifdef UNICODE
	$(XELATEX) --jobname=$(basename $<) '\newcommand{\LaTeXOptions}{$(LATEX_OPTS)}\input{$<}'
	$(XELATEX) --jobname=$(basename $<) '\newcommand{\LaTeXOptions}{$(LATEX_OPTS)}\input{$<}'
else
	$(PDFLATEX) --jobname=$(basename $<) '\newcommand{\LaTeXOptions}{$(LATEX_OPTS)}\input{$<}'
	$(PDFLATEX) --jobname=$(basename $<) '\newcommand{\LaTeXOptions}{$(LATEX_OPTS)}\input{$<}'
endif
#
# 2-up PDF from 1-up PDF.
#
%-2up.pdf: %.pdf
	$(PDFNUP) $< --nup 2x1 --outfile $@
#
# Derived XML with inclusions from source XML without inclusions.
#
# This is done by simply running the original source through xmllint
# with the --xinclude option to process any xi:include elements.
# The result of this could just be piped into the XSLT processor,
# except that (a) not all of the processors support input from stdin,
# and (b) combining both xmllint and XSLT processing into one command
# means that make won't stop if there's any errors from xmllint.
#
# Sed is used to add a comment to the derived XML file, warning that this
# is generated and shouldn't be edited. Sed was used because the <?xml?>
# processing instruction MUST be on the first line. The implication here
# is that all input source files have an <?xml?> processing instruction
# (which they should anyway).
#
%-derived.xml: %.xml
	$(XMLLINT) --xinclude $< > $@
	@$(SED) --in-place --expression='1a ' $@
#
# LaTeX from derived XML.
#
%.tex: %-derived.xml
ifdef UNICODE
	$(call xslt,$<,xml2xelatex.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,period-code,'$(PAPER_PERIOD)')) > $@
else
	$(call xslt,$<,xml2latex.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,period-code,'$(PAPER_PERIOD)')) > $@
endif
#
# HTML from derived XML.
#
%.html: %-derived.xml
ifdef UNICODE
	$(call xslt,$<,xml2xhtml.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,period-code,'$(PAPER_PERIOD)')) > $@
else
	$(call xslt,$<,xml2html.xsl,$(call xslt_parameter,subject-code,'$(SUBJECT_CODE)'),$(call xslt_parameter,paper-number,'$(PAPER_NUMBER)'),$(call xslt_parameter,paper-year,'$(PAPER_YEAR)'),$(call xslt_parameter,period-code,'$(PAPER_PERIOD)')) > $@
endif
#
# Image rules can be a bit messy, because the prerequisite might be in any one
# of several different formats, but we want to apply the same commands anyway
# (e.g., ImageMagick convert) to generate the target. It would be nice if we
# could specify variable file types in a prerequisite of a pattern rule (e.g.,
# %-foo.png: %.png %.jpg %.tif), but unfortunately we can't :(. The solution is
# to create a make function to refactor the commands, and then specify as many
# rules as required depending on the number of file formats. We still end up
# repeating the rule actions, but at least the guts of the action is coded only
# once in the function.
#
# PNG from TIFF, JPEG, PICT (normal image)
# Note: PNG prerequisites are dealt with further down.
#
convert_normal = $(CONVERT) "$(1)" "$(2)"

%.png %-print.png %-web.png: %.tif
	$(call convert_normal,$<,$(IMGDIR)/$@)

%.png %-print.png %-web.png: %.jpg
	$(call convert_normal,$<,$(IMGDIR)/$@)

%-BG.png: %.tif
	$(call convert_bg,$<,$(IMGDIR)/$@)

%-BG.png: %.png
	$(call convert_bg,$<,$(IMGDIR)/$@)

%-BG.png: %.jpg
	$(call convert_bg,$<,$(IMGDIR)/$@)

%-BG-blur.png: %.tif
	$(call convert_bg_blur,$<,$(IMGDIR)/$*-tmp.png,$(IMGDIR)/$@)

%-BG-blur.png: %.png
	$(call convert_bg_blur,$<,$(IMGDIR)/$*-tmp.png,$(IMGDIR)/$@)

%-BG-blur.png: %.jpg
	$(call convert_bg_blur,$<,$(IMGDIR)/$*-tmp.png,$(IMGDIR)/$@)

%-web-zoom.png: %.svg
	$(INKSCAPE) --file=$< --without-gui --export-area-drawing --export-background-opacity=1.0 --export-dpi=144 --export-png=$(IMGDIR)/$@

%-print-zoom.png: %.svg
	$(INKSCAPE) --file=$< --without-gui --export-area-drawing --export-background-opacity=1.0 --export-dpi=300 --export-png=$(IMGDIR)/$@

%-print-zoom-transparent.png: %.svg
	$(INKSCAPE) --file=$< --without-gui --export-area-drawing --export-background-opacity=0 --export-dpi=300 --export-png=$(IMGDIR)/$@

%-web.png: %.png
	$(CP) $< $(IMGDIR)/$@
#
# CSS from Sass (both syntaxes).
#
%.css: %.sass
	$(SASS) $< $@

%.css: %.scss
	$(SASS) $< $@

Ignore Space Show notes View makefile-templates/Makefile.handbook
################################################################################ # # Makefile for DBCOURSES handbooks. Revamped completely from old # monolithic version to a "many-makefiles" model. Each major sub-unit of # the handbook has its own makefile, and is called recursively from here. # This makes management of the whole process a bit more complex, but a lot # more flexible. It's now possible, for example, to build many of the # files for a single tutorial by going into that tutorial's directory and # running a make there. The old scheme was also wont to rebuild lots of # extraneous stuff when only one file changed (especially with graphics). # This does not appear to be (and should not) be a problem with the new # scheme. # ################################################################################ SHELL=/bin/sh ################################################################################ # # Given that we print out our own messages, I see no point in splurging # "Entering...leaving directory" messages all over the screen. It's hard # enough to figure out what's going on already :) # MAKEFLAGS=--no-print-directory ################################################################################ # # Required Environment Variables # # TEACHING_SHARED # This variable specifies the path to the top level of the teaching # shared directory hierarchy (e.g., /path/to/Teaching/Shared). # TEACHING_SHARED?=$(error The required environment variable TEACHING_SHARED has not been defined. It should point to the root level of the shared teaching directory (e.g., /path/to/Teaching/Shared)) # # ALL_PAPERS_ROOT # This variable specifies the path to the top level directory for all # papers taught, i.e., the directory that contains the individual paper # directory hierarchies. For example, /path/to/Teaching/2005. # ALL_PAPERS_ROOT?=$(error The required environment variable ALL_PAPERS_ROOT has not been defined. It should point to the root level of the current teaching directory hierarchy (e.g., /path/to/Teaching/2005)) # # HANDBOOK_INSTALL_ROOT # This variable specifies the path to the top level directory on the web # server, under which the files for this paper will be installed (that is, # the directory that contains the individual paper directory hierarchies). # For example, \\INFO-NTS-12\DBCourses$ (this may require munging). # HANDBOOK_INSTALL_ROOT?=$(error The required environment variable HANDBOOK_INSTALL_ROOT has not been defined. It should point to the root level of the directory hierarchy on the web server (e.g., \\INFO-NTS-12\DBCourses$)) ################################################################################ # # Set up paths to makefile include directories. # # GLOBAL_HANDBOOK_INCLUDE is the global include directory in the "Shared" # hierarchy, and is defined relative to the root of that hierarchy. # # LOCAL_HANDBOOK_INCLUDE is the local include directory for this # particular paper, and is defined relative to the current execution # directory. We are assuming a fixed directory structure here! We can't # really do this as an environment variable because the full path will be # different for each paper, and we can't use the variables from # paper_variables.make to set the path, because that file is in the # include directory! <head spins> We will, however, allow for the # possibility of someone wanting to define this as an environment variable # by making it a conditional assignment. # GLOBAL_HANDBOOK_INCLUDE?=$(TEACHING_SHARED)/Authoring/Handbook/make-includes export LOCAL_HANDBOOK_INCLUDE?=$(shell pwd)/make-includes ################################################################################ # # Include local system-specific configuration. # include $(GLOBAL_HANDBOOK_INCLUDE)/local_configuration.make ################################################################################ # # Include standard make environment variables. # include $(GLOBAL_HANDBOOK_INCLUDE)/standard_environment.make ################################################################################ # # Include variables defining the current paper. # include $(LOCAL_HANDBOOK_INCLUDE)/paper_variables.make ################################################################################ # # Directories for the major sections. Add to as necessary. Sections should # be listed in the order that they will appear in the handbook. Remember to # exclude CVS directories (doh!). # SECTION_DIRS:=$(shell $(FIND) sections -mindepth 1 -maxdepth 1 -type d -not -name CVS) ################################################################################ # # Run one-time initialisation stuff. # # Ensure that the patterns files exist. If they don't, copy the originals # across from the shared directory and abort the run so that the user can # edit them appropriately. # CHECK_ANSWERS_PATTERNS:=$(shell ($(TEST) -f $(LOCAL_HANDBOOK_INCLUDE)/answers.patterns) \|\| ($(CP) $(TEACHING_SHARED)/Authoring/Handbook/makefile-templates/answers.patterns $(LOCAL_HANDBOOK_INCLUDE); $(ECHO) "answers")) CHECK_QUESTIONS_PATTERNS:=$(shell ($(TEST) -f $(LOCAL_HANDBOOK_INCLUDE)/questions.patterns) \|\| ($(CP) $(TEACHING_SHARED)/Authoring/Handbook/makefile-templates/questions.patterns $(LOCAL_HANDBOOK_INCLUDE); $(ECHO) "questions")) CHECK_INSTALL_PATTERNS:=$(shell ($(TEST) -f $(LOCAL_HANDBOOK_INCLUDE)/install.patterns) \|\| ($(CP) $(TEACHING_SHARED)/Authoring/Handbook/makefile-templates/install.patterns $(LOCAL_HANDBOOK_INCLUDE); $(ECHO) "install")) CHECK_ALL_PATTERNS:=$(CHECK_ANSWERS_PATTERNS) $(CHECK_QUESTIONS_PATTERNS) $(CHECK_INSTALL_PATTERNS) ifneq "$(strip $(CHECK_ALL_PATTERNS))" "" $(error Patterns files have been restored from defaults ($(CHECK_ALL_PATTERNS)), please check them before continuing) endif # # Delete the marker file that indicates that we've already initialised the # sub-sections by removing their "content checked" marker files. There's # only one of these, so it's much easier to deal with :) # # Note: NOINIT should _not_ be exported to this sub-make, to ensure that # the sub-makefile's one-time initialisation is executed. # CLEANUP_MARKER_FILES:=$(foreach d,$(SECTION_DIRS),$(shell $(MAKE) -C $d init-clean)) ################################################################################ # # Load in patterns for which items to install. In particular, we are looking # for the value "handbook_root" to appear in either QUESTION_INSTALL_PATTERNS # or ANSWER_INSTALL_PATTERNS. This tells us whether to install links for the # questions and answers versions of the handbook, respectively. Yes, this is # a hack! # # _INSTALL_PATTERNS defines the patterns for installing on the web server. # QUESTION_INSTALL_PATTERNS:= ANSWER_INSTALL_PATTERNS:= # # Load in the install patterns from the local make-includes directory. # include $(LOCAL_HANDBOOK_INCLUDE)/install.patterns ################################################################################ # # Lists of LaTeX files to be \input into the master LaTeX document. Just # build a single list for everything; we can extract the sections we want # at the time using make's filter function, as the sections have distinct # names. These are statically defined rather than using a find command, # because the files may not exist at the time the find command is # executed. This Would Be Non-Useful. # QUESTION_TEX_INPUTS:=$(foreach d,$(SECTION_DIRS),$d/question-manifest.tex) ANSWER_TEX_INPUTS:=$(foreach d,$(SECTION_DIRS),$d/answer-manifest.tex) LATEX_INCLUDES:=$(shell $(FIND) latex-includes -name ".tex") ################################################################################ # # Additional options for the coursehandbook document class to set up # the details of the paper. These get included in a call to the # \papersetup macro in the template file (including the options # directly into the \documentclass is problematic --- see # coursehandbook.cls for details). The values are set in # latex-includes/paper_variables.make. # PAPER_OPTIONS:=subjectcode=$(SUBJECT_CODE),papernumber=$(PAPER_NUMBER),papertitle=$(PAPER_TITLE),paperyear=$(PAPER_YEAR),paperperiod=$(PAPER_PERIOD),authors=$(HANDBOOK_AUTHORS) ################################################################################ # # Directory to install files into on web server. # INSTALL_DIRECTORY:=$(HANDBOOK_INSTALL_ROOT)/$(SUBJECT_CODE)$(PAPER_NUMBER)/Handbook ################################################################################ # # Files to be installed on web server. # QUESTION_INSTALL_FILES:=handbook.pdf handbook-2up.pdf $(wildcard .png) ANSWER_INSTALL_FILES:= handbook-answers.pdf handbook-answers-2up.pdf \ $(wildcard .png) # Sorting gets rid of any duplicates (e.g., the PNG files). INSTALL_FILES:=$(sort $(QUESTION_INSTALL_FILES) $(ANSWER_INSTALL_FILES)) ################################################################################ # # Lists of files for cleaning up. # WEB_CLEAN_FILES:=.png PRINT_CLEAN_FILES:=handbook.tex handbook-answers.tex \ .pdf .ps .dvi .aux .log .toc .idx .ind .tex~ .out ALL_CLEAN_FILES:=$(WEB_CLEAN_FILES) $(PRINT_CLEAN_FILES) ################################################################################ # # List of possible targets. # TARGETS:=all targets debug install \ web web-questions web-answers \ print print-questions print-answers \ questions answers \ section-questions section-answers \ question-pdfs answer-pdfs \ clean web-clean print-clean .PHONY: $(TARGETS) ################################################################################ # # Build everything. # all: web print ################################################################################ # # Build questions/answers only. # questions: web-questions print-questions answers: web-answers print-answers ################################################################################ # # Build web version only. NOINIT and SECTION should be exported to all # these sub-makes. # web: general-graphics web-questions web-answers web-questions: @$(foreach d,$(SECTION_DIRS),if $(MAKE) -C $d web-questions NOINIT=x SECTION=$(notdir $(d)); then $(TRUE); else exit 1; fi;) web-answers: @$(foreach d,$(SECTION_DIRS),if $(MAKE) -C $d web-answers NOINIT=x SECTION=$(notdir $(d)); then $(TRUE); else exit 1; fi;) ################################################################################ # # Build print version only. NOINIT and SECTION should be exported to all # these sub-makes. # print: general-graphics print-questions print-answers print-questions: section-questions handbook.pdf handbook-2up.pdf question-pdfs section-questions: @$(foreach d,$(SECTION_DIRS),if $(MAKE) -C $d print-questions NOINIT=x SECTION=$(notdir $(d)); then $(TRUE); else exit 1; fi;) handbook.tex: handbook_template.tex $(QUESTION_TEX_INPUTS) $(LOCAL_HANDBOOK_INCLUDE)/questions.patterns $(LATEX_INCLUDES) @$(ANNOUNCE) "Generating $@" @$(ECHO) "% THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT!" > $@ @$(ECHO) >> $@ @$(PERL) -p -e "s\|\<\@SHOWANSWERS\@\>\|hideanswers\|;" \ -e "s\|\<\@PAPEROPTIONS\@\>\|$(PAPER_OPTIONS)\|;" \ $(foreach sect,$(SECTION_DIRS),-e "s\|\<\@SECTION\[$(notdir $(sect))\]\@\>\|\\\\input{$(basename $(filter $(sect)/%,$(QUESTION_TEX_INPUTS)))}\|;") $< >> $@ question-pdfs: @$(foreach d,$(SECTION_DIRS),if $(MAKE) -C $d question-pdfs NOINIT=x SECTION=$(notdir $(d)); then $(TRUE); else exit 1; fi;) # # Answers # print-answers: section-answers handbook-answers.pdf handbook-answers-2up.pdf answer-pdfs section-answers: @$(foreach d,$(SECTION_DIRS),if $(MAKE) -C $d print-answers NOINIT=x SECTION=$(notdir $(d)); then $(TRUE); else exit 1; fi;) handbook-answers.tex: handbook_template.tex $(ANSWER_TEX_INPUTS) $(LOCAL_HANDBOOK_INCLUDE)/answers.patterns $(LATEX_INCLUDES) @$(ANNOUNCE) "Generating $@" @$(ECHO) "% THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT!" > $@ @$(ECHO) >> $@ @$(PERL) -p -e "s\|\<\@SHOWANSWERS\@\>\|showanswers\|;" \ -e "s\|\<\@PAPEROPTIONS\@\>\|$(PAPER_OPTIONS)\|;" \ $(foreach sect,$(SECTION_DIRS),-e "s\|\<\@SECTION\[$(notdir $(sect))\]\@\>\|\\\\input{$(basename $(filter $(sect)/%,$(ANSWER_TEX_INPUTS)))}\|;") $< >> $@ answer-pdfs: @$(foreach d,$(SECTION_DIRS),if $(MAKE) -C $d answer-pdfs NOINIT=x SECTION=$(notdir $(d)); then $(TRUE); else exit 1; fi;) # # Generic rules for print version. # %.pdf: %.tex @$(ANNOUNCE) "pdflatex $< (pass 1)" $(PDFLATEX) --jobname=$(basename $<) '\def\LaTeXOptions{$(LATEX_OPTS)}\input{$<}' @$(ANNOUNCE) "pdflatex $< (pass 2)" $(PDFLATEX) --jobname=$(basename $<) '\def\LaTeXOptions{$(LATEX_OPTS)}\input{$<}' %-2up.pdf: %.pdf @$(ANNOUNCE) "Generating $@" $(PDFNUP) --nup 2x1 --outfile $@ $< ################################################################################ # # Build any general graphics that are used throughout the handbook. This uses # the standard makefile for a content directory, but the only files in this # directory are graphics files. # general-graphics: @if $(MAKE) -C graphics general-graphics BUILD_DIR=$(CURDIR); then $(TRUE); else exit 1; fi ################################################################################ # # Deploy the appropriate files into a shared folder, which is then synchronised # with Blackboard. This relies on the environment variable HANDBOOK_INSTALL_ROOT # being defined, and (assuming that this variable points to a directory on the # network) the appropriate share has been mounted. # # See build_document_rules.make for an explanation of why the install # uses a foreach. # install: questions answers @$(SITECOPY) --catchup Blackboard$(PAPER_NUMBER) @$(ANNOUNCE) "Deploying handbook files to Blackboard --- make sure that you have the share mounted!" @$(TEST) -d $(HANDBOOK_INSTALL_ROOT) @$(MKDIR_P) $(INSTALL_DIRECTORY) @$(foreach d,$(SECTION_DIRS),if $(MAKE) -C $d $@ NOINIT=x SECTION=$(notdir $(d)); then $(TRUE); else exit 1; fi;) @$(ANNOUNCE) "Deploying files into $(INSTALL_DIRECTORY)" @$(foreach f,$(QUESTION_INSTALL_FILES),if $(TEST) ! -f $(INSTALL_DIRECTORY)/$(f) -o $(f) -nt $(INSTALL_DIRECTORY)/$(f); then $(ECHO) "Deploying $(f)"; $(CP) $(f) $(INSTALL_DIRECTORY); fi;) @$(foreach f,$(ANSWER_INSTALL_FILES),if $(TEST) ! -f $(INSTALL_DIRECTORY)/$(f) -o $(f) -nt $(INSTALL_DIRECTORY)/$(f); then $(ECHO) "Deploying $(f)"; $(CP) $(f) $(INSTALL_DIRECTORY); fi;) @$(ANNOUNCE) "Synchronising with Blackboard" @$(SITECOPY) --update Blackboard$(PAPER_NUMBER) ################################################################################ # # Clean up all generated files. # "web-clean" and "print-clean" only clean up files for the web and print # versions, respectively. Note that "clean" isn't dependent on either # "web-clean" or "print-clean", to ensure that the correct target is # used when calling the sub-makefile. # clean: @$(foreach d,$(SECTION_DIRS),$(MAKE) -C $d $@;) ifneq ($(strip $(ALL_CLEAN_FILES)),) -$(RM) -f $(ALL_CLEAN_FILES) @$(MAKE) -C graphics clean BUILD_DIR=$(CURDIR) endif web-clean: @$(foreach d,$(SECTION_DIRS),$(MAKE) -C $d $@;) ifneq ($(strip $(WEB_CLEAN_FILES)),) -$(RM) -f $(WEB_CLEAN_FILES) endif print-clean: @$(foreach d,$(SECTION_DIRS),$(MAKE) -C $d $@;) ifneq ($(strip $(PRINT_CLEAN_FILES)),) -$(RM) -f $(PRINT_CLEAN_FILES) endif ################################################################################ # # Debugging information, mostly lists of the generated variables. # debug: @$(ANNOUNCE) Externally defined variables @$(ECHO) "TEACHING_SHARED = [$(TEACHING_SHARED)]" @$(ECHO) "HANDBOOK_INSTALL_ROOT = [$(HANDBOOK_INSTALL_ROOT)]" @$(ANNOUNCE) Internally defined variables @$(ECHO) "GLOBAL_HANDBOOK_INCLUDE = [$(GLOBAL_HANDBOOK_INCLUDE)]" @$(ECHO) "LOCAL_HANDBOOK_INCLUDE = [$(LOCAL_HANDBOOK_INCLUDE)]" @$(ECHO) "SECTION_DIRS = [$(SECTION_DIRS)]" @$(ECHO) "QUESTION_TEX_INPUTS = [$(QUESTION_TEX_INPUTS)]" @$(ECHO) "ANSWER_TEX_INPUTS = [$(ANSWER_TEX_INPUTS)]" @$(ECHO) "LATEX_INCLUDES = [$(LATEX_INCLUDES)]" @$(ECHO) "LATEX_OPTS = [$(LATEX_OPTS)]" @$(ECHO) "INSTALL_DIRECTORY = [$(INSTALL_DIRECTORY)]" @$(ECHO) "INSTALL_FILES = [$(INSTALL_FILES)]" @$(ECHO) "QUESTION_INSTALL_FILES = [$(QUESTION_INSTALL_FILES)]" @$(ECHO) "ANSWER_INSTALL_FILES = [$(ANSWER_INSTALL_FILES)]" @$(ECHO) "QUESTION_INSTALL_PATTERNS = [$(QUESTION_INSTALL_PATTERNS)]" @$(ECHO) "ANSWER_INSTALL_PATTERNS = [$(ANSWER_INSTALL_PATTERNS)]" @$(ECHO) "WEB_CLEAN_FILES = [$(WEB_CLEAN_FILES)]" @$(ECHO) "PRINT_CLEAN_FILES = [$(PRINT_CLEAN_FILES)]" @$(ECHO) "ALL_CLEAN_FILES = [$(ALL_CLEAN_FILES)]" @$(ECHO) "SUBJECT_CODE = [$(SUBJECT_CODE)]" @$(ECHO) "PAPER_NUMBER = [$(PAPER_NUMBER)]" @$(ECHO) "PAPER_TITLE = [$(PAPER_TITLE)]" @$(ECHO) "PAPER_YEAR = [$(PAPER_YEAR)]" @$(ECHO) "PAPER_PERIOD = [$(PAPER_PERIOD)]" @$(ECHO) "HANDBOOK_AUTHORS = [$(HANDBOOK_AUTHORS)]" @$(ECHO) "PAPER_OPTIONS = [$(PAPER_OPTIONS)]" ################################################################################ # # Print out the list of targets. Handy for when you forget! # targets: @$(ECHO) $(TARGETS) ################################################################################ # # Makefile for DBCOURSES handbooks. Revamped completely from old # monolithic version to a "many-makefiles" model. Each major sub-unit of # the handbook has its own makefile, and is called recursively from here. # This makes management of the whole process a bit more complex, but a lot # more flexible. It's now possible, for example, to build many of the # files for a single tutorial by going into that tutorial's directory and # running a make there. The old scheme was also wont to rebuild lots of # extraneous stuff when only one file changed (especially with graphics). # This does not appear to be (and should not) be a problem with the new # scheme. # ################################################################################ SHELL=/bin/sh ################################################################################ # # Given that we print out our own messages, I see no point in splurging # "Entering...leaving directory" messages all over the screen. It's hard # enough to figure out what's going on already :) # MAKEFLAGS=--no-print-directory ################################################################################ # # Required Environment Variables # # TEACHING_SHARED # This variable specifies the path to the top level of the teaching # shared directory hierarchy (e.g., /path/to/Teaching/Shared). # TEACHING_SHARED?=$(error The required environment variable TEACHING_SHARED has not been defined. It should point to the root level of the shared teaching directory (e.g., /path/to/Teaching/Shared)) # # ALL_PAPERS_ROOT # This variable specifies the path to the top level directory for all # papers taught, i.e., the directory that contains the individual paper # directory hierarchies. For example, /path/to/Teaching/2005. # ALL_PAPERS_ROOT?=$(error The required environment variable ALL_PAPERS_ROOT has not been defined. It should point to the root level of the current teaching directory hierarchy (e.g., /path/to/Teaching/2005)) # # HANDBOOK_INSTALL_ROOT # This variable specifies the path to the top level directory on the web # server, under which the files for this paper will be installed (that is, # the directory that contains the individual paper directory hierarchies). # For example, \\INFO-NTS-12\DBCourses$ (this may require munging). # HANDBOOK_INSTALL_ROOT?=$(error The required environment variable HANDBOOK_INSTALL_ROOT has not been defined. It should point to the root level of the directory hierarchy on the web server (e.g., \\INFO-NTS-12\DBCourses$)) ################################################################################ # # Set up paths to makefile include directories. # # GLOBAL_HANDBOOK_INCLUDE is the global include directory in the "Shared" # hierarchy, and is defined relative to the root of that hierarchy. # # LOCAL_HANDBOOK_INCLUDE is the local include directory for this # particular paper, and is defined relative to the current execution # directory. We are assuming a fixed directory structure here! We can't # really do this as an environment variable because the full path will be # different for each paper, and we can't use the variables from # paper_variables.make to set the path, because that file is in the # include directory! <head spins> We will, however, allow for the # possibility of someone wanting to define this as an environment variable # by making it a conditional assignment. # GLOBAL_HANDBOOK_INCLUDE?=$(TEACHING_SHARED)/Authoring/Handbook/make-includes export LOCAL_HANDBOOK_INCLUDE?=$(shell pwd)/make-includes ################################################################################ # # Include local system-specific configuration. # include $(GLOBAL_HANDBOOK_INCLUDE)/local_configuration.make ################################################################################ # # Include standard make environment variables. # include $(GLOBAL_HANDBOOK_INCLUDE)/standard_environment.make ################################################################################ # # Include variables defining the current paper. # include $(LOCAL_HANDBOOK_INCLUDE)/paper_variables.make ################################################################################ # # Directories for the major sections. Add to as necessary. Sections should # be listed in the order that they will appear in the handbook. Remember to # exclude CVS directories (doh!). # SECTION_DIRS:=$(shell $(FIND) sections -mindepth 1 -maxdepth 1 -type d -not -name CVS) ################################################################################ # # Run one-time initialisation stuff. # # Ensure that the patterns files exist. If they don't, copy the originals # across from the shared directory and abort the run so that the user can # edit them appropriately. # CHECK_ANSWERS_PATTERNS:=$(shell ($(TEST) -f $(LOCAL_HANDBOOK_INCLUDE)/answers.patterns) \|\| ($(CP) $(TEACHING_SHARED)/Authoring/Handbook/makefile-templates/answers.patterns $(LOCAL_HANDBOOK_INCLUDE); $(ECHO) "answers")) CHECK_QUESTIONS_PATTERNS:=$(shell ($(TEST) -f $(LOCAL_HANDBOOK_INCLUDE)/questions.patterns) \|\| ($(CP) $(TEACHING_SHARED)/Authoring/Handbook/makefile-templates/questions.patterns $(LOCAL_HANDBOOK_INCLUDE); $(ECHO) "questions")) CHECK_INSTALL_PATTERNS:=$(shell ($(TEST) -f $(LOCAL_HANDBOOK_INCLUDE)/install.patterns) \|\| ($(CP) $(TEACHING_SHARED)/Authoring/Handbook/makefile-templates/install.patterns $(LOCAL_HANDBOOK_INCLUDE); $(ECHO) "install")) CHECK_ALL_PATTERNS:=$(CHECK_ANSWERS_PATTERNS) $(CHECK_QUESTIONS_PATTERNS) $(CHECK_INSTALL_PATTERNS) ifneq "$(strip $(CHECK_ALL_PATTERNS))" "" $(error Patterns files have been restored from defaults ($(CHECK_ALL_PATTERNS)), please check them before continuing) endif # # Delete the marker file that indicates that we've already initialised the # sub-sections by removing their "content checked" marker files. There's # only one of these, so it's much easier to deal with :) # # Note: NOINIT should _not_ be exported to this sub-make, to ensure that # the sub-makefile's one-time initialisation is executed. # CLEANUP_MARKER_FILES:=$(foreach d,$(SECTION_DIRS),$(shell $(MAKE) -C $d init-clean)) ################################################################################ # # Load in patterns for which items to install. In particular, we are looking # for the value "handbook_root" to appear in either QUESTION_INSTALL_PATTERNS # or ANSWER_INSTALL_PATTERNS. This tells us whether to install links for the # questions and answers versions of the handbook, respectively. Yes, this is # a hack! # # _INSTALL_PATTERNS defines the patterns for installing on the web server. # QUESTION_INSTALL_PATTERNS:= ANSWER_INSTALL_PATTERNS:= # # Load in the install patterns from the local make-includes directory. # include $(LOCAL_HANDBOOK_INCLUDE)/install.patterns ################################################################################ # # Lists of LaTeX files to be \input into the master LaTeX document. Just # build a single list for everything; we can extract the sections we want # at the time using make's filter function, as the sections have distinct # names. These are statically defined rather than using a find command, # because the files may not exist at the time the find command is # executed. This Would Be Non-Useful. # QUESTION_TEX_INPUTS:=$(foreach d,$(SECTION_DIRS),$d/question-manifest.tex) ANSWER_TEX_INPUTS:=$(foreach d,$(SECTION_DIRS),$d/answer-manifest.tex) LATEX_INCLUDES:=$(shell $(FIND) latex-includes -name ".tex") ################################################################################ # # Additional options for the coursehandbook document class to set up # the details of the paper. These get included in a call to the # \papersetup macro in the template file (including the options # directly into the \documentclass is problematic --- see # coursehandbook.cls for details). The values are set in # latex-includes/paper_variables.make. # PAPER_OPTIONS:=subjectcode=$(SUBJECT_CODE),papernumber=$(PAPER_NUMBER),papertitle=$(PAPER_TITLE),paperyear=$(PAPER_YEAR),paperperiod=$(PAPER_PERIOD),authors=$(HANDBOOK_AUTHORS) ################################################################################ # # Directory to install files into on web server. # INSTALL_DIRECTORY:=$(HANDBOOK_INSTALL_ROOT)/$(SUBJECT_CODE)$(PAPER_NUMBER)/Handbook ################################################################################ # # Files to be installed on web server. # QUESTION_INSTALL_FILES:=handbook.pdf handbook-2up.pdf $(wildcard .png) ANSWER_INSTALL_FILES:= handbook-answers.pdf handbook-answers-2up.pdf \ $(wildcard .png) # Sorting gets rid of any duplicates (e.g., the PNG files). INSTALL_FILES:=$(sort $(QUESTION_INSTALL_FILES) $(ANSWER_INSTALL_FILES)) ################################################################################ # # Lists of files for cleaning up. # WEB_CLEAN_FILES:=.png PRINT_CLEAN_FILES:=handbook.tex handbook-answers.tex \ .pdf .ps .dvi .aux .log .toc .idx .ind .tex~ .out ALL_CLEAN_FILES:=$(WEB_CLEAN_FILES) $(PRINT_CLEAN_FILES) ################################################################################ # # List of possible targets. # TARGETS:=all targets debug install \ web web-questions web-answers \ print print-questions print-answers \ questions answers \ section-questions section-answers \ question-pdfs answer-pdfs \ clean web-clean print-clean .PHONY: $(TARGETS) ################################################################################ # # Build everything. # all: web print ################################################################################ # # Build questions/answers only. # questions: web-questions print-questions answers: web-answers print-answers ################################################################################ # # Build web version only. NOINIT and SECTION should be exported to all # these sub-makes. # web: general-graphics web-questions web-answers web-questions: @$(foreach d,$(SECTION_DIRS),if $(MAKE) -C $d web-questions NOINIT=x SECTION=$(notdir $(d)); then $(TRUE); else exit 1; fi;) web-answers: @$(foreach d,$(SECTION_DIRS),if $(MAKE) -C $d web-answers NOINIT=x SECTION=$(notdir $(d)); then $(TRUE); else exit 1; fi;) ################################################################################ # # Build print version only. NOINIT and SECTION should be exported to all # these sub-makes. # print: general-graphics print-questions print-answers print-questions: section-questions handbook.pdf handbook-2up.pdf question-pdfs section-questions: @$(foreach d,$(SECTION_DIRS),if $(MAKE) -C $d print-questions NOINIT=x SECTION=$(notdir $(d)); then $(TRUE); else exit 1; fi;) handbook.tex: handbook_template.tex $(QUESTION_TEX_INPUTS) $(LOCAL_HANDBOOK_INCLUDE)/questions.patterns $(LATEX_INCLUDES) @$(ANNOUNCE) "Generating $@" @$(ECHO) "% THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT!" > $@ @$(ECHO) >> $@ @$(PERL) -p -e "s\|\<\@SHOWANSWERS\@\>\|hideanswers\|;" \ -e "s\|\<\@PAPEROPTIONS\@\>\|$(PAPER_OPTIONS)\|;" \ $(foreach sect,$(SECTION_DIRS),-e "s\|\<\@SECTION\[$(notdir $(sect))\]\@\>\|\\\\input{$(basename $(filter $(sect)/%,$(QUESTION_TEX_INPUTS)))}\|;") $< >> $@ question-pdfs: @$(foreach d,$(SECTION_DIRS),if $(MAKE) -C $d question-pdfs NOINIT=x SECTION=$(notdir $(d)); then $(TRUE); else exit 1; fi;) # # Answers # print-answers: section-answers handbook-answers.pdf handbook-answers-2up.pdf answer-pdfs section-answers: @$(foreach d,$(SECTION_DIRS),if $(MAKE) -C $d print-answers NOINIT=x SECTION=$(notdir $(d)); then $(TRUE); else exit 1; fi;) handbook-answers.tex: handbook_template.tex $(ANSWER_TEX_INPUTS) $(LOCAL_HANDBOOK_INCLUDE)/answers.patterns $(LATEX_INCLUDES) @$(ANNOUNCE) "Generating $@" @$(ECHO) "% THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT!" > $@ @$(ECHO) >> $@ @$(PERL) -p -e "s\|\<\@SHOWANSWERS\@\>\|showanswers\|;" \ -e "s\|\<\@PAPEROPTIONS\@\>\|$(PAPER_OPTIONS)\|;" \ $(foreach sect,$(SECTION_DIRS),-e "s\|\<\@SECTION\[$(notdir $(sect))\]\@\>\|\\\\input{$(basename $(filter $(sect)/%,$(ANSWER_TEX_INPUTS)))}\|;") $< >> $@ answer-pdfs: @$(foreach d,$(SECTION_DIRS),if $(MAKE) -C $d answer-pdfs NOINIT=x SECTION=$(notdir $(d)); then $(TRUE); else exit 1; fi;) # # Generic rules for print version. # %.pdf: %.tex @$(ANNOUNCE) "pdflatex $< (pass 1)" $(PDFLATEX) --jobname=$(basename $<) '\newcommand{\LaTeXOptions}{$(LATEX_OPTS)}\input{$<}' @$(ANNOUNCE) "pdflatex $< (pass 2)" $(PDFLATEX) --jobname=$(basename $<) '\newcommand{\LaTeXOptions}{$(LATEX_OPTS)}\input{$<}' %-2up.pdf: %.pdf @$(ANNOUNCE) "Generating $@" $(PDFNUP) --nup 2x1 --outfile $@ $< ################################################################################ # # Build any general graphics that are used throughout the handbook. This uses # the standard makefile for a content directory, but the only files in this # directory are graphics files. # general-graphics: @if $(MAKE) -C graphics general-graphics BUILD_DIR=$(CURDIR); then $(TRUE); else exit 1; fi ################################################################################ # # Deploy the appropriate files into a shared folder, which is then synchronised # with Blackboard. This relies on the environment variable HANDBOOK_INSTALL_ROOT # being defined, and (assuming that this variable points to a directory on the # network) the appropriate share has been mounted. # # See build_document_rules.make for an explanation of why the install # uses a foreach. # install: questions answers @$(SITECOPY) --catchup Blackboard$(PAPER_NUMBER) @$(ANNOUNCE) "Deploying handbook files to Blackboard --- make sure that you have the share mounted!" @$(TEST) -d $(HANDBOOK_INSTALL_ROOT) @$(MKDIR_P) $(INSTALL_DIRECTORY) @$(foreach d,$(SECTION_DIRS),if $(MAKE) -C $d $@ NOINIT=x SECTION=$(notdir $(d)); then $(TRUE); else exit 1; fi;) @$(ANNOUNCE) "Deploying files into $(INSTALL_DIRECTORY)" @$(foreach f,$(QUESTION_INSTALL_FILES),if $(TEST) ! -f $(INSTALL_DIRECTORY)/$(f) -o $(f) -nt $(INSTALL_DIRECTORY)/$(f); then $(ECHO) "Deploying $(f)"; $(CP) $(f) $(INSTALL_DIRECTORY); fi;) @$(foreach f,$(ANSWER_INSTALL_FILES),if $(TEST) ! -f $(INSTALL_DIRECTORY)/$(f) -o $(f) -nt $(INSTALL_DIRECTORY)/$(f); then $(ECHO) "Deploying $(f)"; $(CP) $(f) $(INSTALL_DIRECTORY); fi;) @$(ANNOUNCE) "Synchronising with Blackboard" @$(SITECOPY) --update Blackboard$(PAPER_NUMBER) ################################################################################ # # Clean up all generated files. # "web-clean" and "print-clean" only clean up files for the web and print # versions, respectively. Note that "clean" isn't dependent on either # "web-clean" or "print-clean", to ensure that the correct target is # used when calling the sub-makefile. # clean: @$(foreach d,$(SECTION_DIRS),$(MAKE) -C $d $@;) ifneq ($(strip $(ALL_CLEAN_FILES)),) -$(RM) -f $(ALL_CLEAN_FILES) @$(MAKE) -C graphics clean BUILD_DIR=$(CURDIR) endif web-clean: @$(foreach d,$(SECTION_DIRS),$(MAKE) -C $d $@;) ifneq ($(strip $(WEB_CLEAN_FILES)),) -$(RM) -f $(WEB_CLEAN_FILES) endif print-clean: @$(foreach d,$(SECTION_DIRS),$(MAKE) -C $d $@;) ifneq ($(strip $(PRINT_CLEAN_FILES)),) -$(RM) -f $(PRINT_CLEAN_FILES) endif ################################################################################ # # Debugging information, mostly lists of the generated variables. # debug: @$(ANNOUNCE) Externally defined variables @$(ECHO) "TEACHING_SHARED = [$(TEACHING_SHARED)]" @$(ECHO) "HANDBOOK_INSTALL_ROOT = [$(HANDBOOK_INSTALL_ROOT)]" @$(ANNOUNCE) Internally defined variables @$(ECHO) "GLOBAL_HANDBOOK_INCLUDE = [$(GLOBAL_HANDBOOK_INCLUDE)]" @$(ECHO) "LOCAL_HANDBOOK_INCLUDE = [$(LOCAL_HANDBOOK_INCLUDE)]" @$(ECHO) "SECTION_DIRS = [$(SECTION_DIRS)]" @$(ECHO) "QUESTION_TEX_INPUTS = [$(QUESTION_TEX_INPUTS)]" @$(ECHO) "ANSWER_TEX_INPUTS = [$(ANSWER_TEX_INPUTS)]" @$(ECHO) "LATEX_INCLUDES = [$(LATEX_INCLUDES)]" @$(ECHO) "LATEX_OPTS = [$(LATEX_OPTS)]" @$(ECHO) "INSTALL_DIRECTORY = [$(INSTALL_DIRECTORY)]" @$(ECHO) "INSTALL_FILES = [$(INSTALL_FILES)]" @$(ECHO) "QUESTION_INSTALL_FILES = [$(QUESTION_INSTALL_FILES)]" @$(ECHO) "ANSWER_INSTALL_FILES = [$(ANSWER_INSTALL_FILES)]" @$(ECHO) "QUESTION_INSTALL_PATTERNS = [$(QUESTION_INSTALL_PATTERNS)]" @$(ECHO) "ANSWER_INSTALL_PATTERNS = [$(ANSWER_INSTALL_PATTERNS)]" @$(ECHO) "WEB_CLEAN_FILES = [$(WEB_CLEAN_FILES)]" @$(ECHO) "PRINT_CLEAN_FILES = [$(PRINT_CLEAN_FILES)]" @$(ECHO) "ALL_CLEAN_FILES = [$(ALL_CLEAN_FILES)]" @$(ECHO) "SUBJECT_CODE = [$(SUBJECT_CODE)]" @$(ECHO) "PAPER_NUMBER = [$(PAPER_NUMBER)]" @$(ECHO) "PAPER_TITLE = [$(PAPER_TITLE)]" @$(ECHO) "PAPER_YEAR = [$(PAPER_YEAR)]" @$(ECHO) "PAPER_PERIOD = [$(PAPER_PERIOD)]" @$(ECHO) "HANDBOOK_AUTHORS = [$(HANDBOOK_AUTHORS)]" @$(ECHO) "PAPER_OPTIONS = [$(PAPER_OPTIONS)]" ################################################################################ # # Print out the list of targets. Handy for when you forget! # targets: @$(ECHO) $(TARGETS)

Ignore Space Show notes View

makefile-templates/Makefile.handbook

################################################################################
#
# Makefile for DBCOURSES handbooks. Revamped completely from old
# monolithic version to a "many-makefiles" model. Each major sub-unit of
# the handbook has its own makefile, and is called recursively from here.
# This makes management of the whole process a bit more complex, but a lot
# more flexible. It's now possible, for example, to build many of the
# files for a single tutorial by going into that tutorial's directory and
# running a make there. The old scheme was also wont to rebuild lots of
# extraneous stuff when only one file changed (especially with graphics).
# This does not appear to be (and should not) be a problem with the new
# scheme.
#
################################################################################

SHELL=/bin/sh

################################################################################
#
# Given that we print out our own messages, I see no point in splurging
# "Entering...leaving directory" messages all over the screen. It's hard
# enough to figure out what's going on already :)
#
MAKEFLAGS=--no-print-directory

################################################################################
#
# Required Environment Variables
#
# TEACHING_SHARED
#	This variable specifies the path to the top level of the teaching
#	shared directory hierarchy (e.g., /path/to/Teaching/Shared).
#
TEACHING_SHARED?=$(error The required environment variable TEACHING_SHARED has not been defined. It should point to the root level of the shared teaching directory (e.g., /path/to/Teaching/Shared))
#
# ALL_PAPERS_ROOT
#	This variable specifies the path to the top level directory for all
#	papers taught, i.e., the directory that contains the individual paper
#	directory hierarchies. For example, /path/to/Teaching/2005.
#
ALL_PAPERS_ROOT?=$(error The required environment variable ALL_PAPERS_ROOT has not been defined. It should point to the root level of the current teaching directory hierarchy (e.g., /path/to/Teaching/2005))
#
# HANDBOOK_INSTALL_ROOT
#	This variable specifies the path to the top level directory on the web
#	server, under which the files for this paper will be installed (that is,
#	the directory that contains the individual paper directory hierarchies).
#	For example, \\INFO-NTS-12\DBCourses$ (this may require munging).
#
HANDBOOK_INSTALL_ROOT?=$(error The required environment variable HANDBOOK_INSTALL_ROOT has not been defined. It should point to the root level of the directory hierarchy on the web server (e.g., \\INFO-NTS-12\DBCourses$))

################################################################################
#
# Set up paths to makefile include directories.
#
# GLOBAL_HANDBOOK_INCLUDE is the global include directory in the "Shared"
# hierarchy, and is defined relative to the root of that hierarchy.
#
# LOCAL_HANDBOOK_INCLUDE is the local include directory for this
# particular paper, and is defined relative to the current execution
# directory. We are assuming a fixed directory structure here! We can't
# really do this as an environment variable because the full path will be
# different for each paper, and we can't use the variables from
# paper_variables.make to set the path, because that file is in the
# include directory! <head spins> We will, however, allow for the
# possibility of someone wanting to define this as an environment variable
# by making it a conditional assignment.
#
GLOBAL_HANDBOOK_INCLUDE?=$(TEACHING_SHARED)/Authoring/Handbook/make-includes

export LOCAL_HANDBOOK_INCLUDE?=$(shell pwd)/make-includes

################################################################################
#
# Include local system-specific configuration.
#
include $(GLOBAL_HANDBOOK_INCLUDE)/local_configuration.make

################################################################################
#
# Include standard make environment variables.
#
include $(GLOBAL_HANDBOOK_INCLUDE)/standard_environment.make

################################################################################
#
# Include variables defining the current paper.
#
include $(LOCAL_HANDBOOK_INCLUDE)/paper_variables.make

################################################################################
#
# Directories for the major sections. Add to as necessary. Sections should
# be listed in the order that they will appear in the handbook. Remember to
# exclude CVS directories (doh!).
#
SECTION_DIRS:=$(shell $(FIND) sections -mindepth 1 -maxdepth 1 -type d -not -name CVS)

################################################################################
#
# Run one-time initialisation stuff.
#
# Ensure that the patterns files exist. If they don't, copy the originals
# across from the shared directory and abort the run so that the user can
# edit them appropriately.
#
CHECK_ANSWERS_PATTERNS:=$(shell ($(TEST) -f $(LOCAL_HANDBOOK_INCLUDE)/answers.patterns) || ($(CP) $(TEACHING_SHARED)/Authoring/Handbook/makefile-templates/answers.patterns $(LOCAL_HANDBOOK_INCLUDE); $(ECHO) "answers"))
CHECK_QUESTIONS_PATTERNS:=$(shell ($(TEST) -f $(LOCAL_HANDBOOK_INCLUDE)/questions.patterns) || ($(CP) $(TEACHING_SHARED)/Authoring/Handbook/makefile-templates/questions.patterns $(LOCAL_HANDBOOK_INCLUDE); $(ECHO) "questions"))
CHECK_INSTALL_PATTERNS:=$(shell ($(TEST) -f $(LOCAL_HANDBOOK_INCLUDE)/install.patterns) || ($(CP) $(TEACHING_SHARED)/Authoring/Handbook/makefile-templates/install.patterns $(LOCAL_HANDBOOK_INCLUDE); $(ECHO) "install"))
CHECK_ALL_PATTERNS:=$(CHECK_ANSWERS_PATTERNS) $(CHECK_QUESTIONS_PATTERNS) $(CHECK_INSTALL_PATTERNS)

ifneq "$(strip $(CHECK_ALL_PATTERNS))" ""
$(error Patterns files have been restored from defaults ($(CHECK_ALL_PATTERNS)), please check them before continuing)
endif
#
# Delete the marker file that indicates that we've already initialised the
# sub-sections by removing their "content checked" marker files. There's
# only one of these, so it's much easier to deal with :)
#
# Note: NOINIT should _not_ be exported to this sub-make, to ensure that
# the sub-makefile's one-time initialisation is executed.
#
CLEANUP_MARKER_FILES:=$(foreach d,$(SECTION_DIRS),$(shell $(MAKE) -C $d init-clean))

################################################################################
#
# Load in patterns for which items to install. In particular, we are looking
# for the value "handbook_root" to appear in either QUESTION_INSTALL_PATTERNS
# or ANSWER_INSTALL_PATTERNS. This tells us whether to install links for the
# questions and answers versions of the handbook, respectively. Yes, this is
# a hack!
#
# *_INSTALL_PATTERNS defines the patterns for installing on the web server.
#
QUESTION_INSTALL_PATTERNS:=
ANSWER_INSTALL_PATTERNS:=

#
# Load in the install patterns from the local make-includes directory.
#
include $(LOCAL_HANDBOOK_INCLUDE)/install.patterns

################################################################################
#
# Lists of LaTeX files to be \input into the master LaTeX document. Just
# build a single list for everything; we can extract the sections we want
# at the time using make's filter function, as the sections have distinct
# names. These are statically defined rather than using a find command,
# because the files may not exist at the time the find command is
# executed. This Would Be Non-Useful.
#
QUESTION_TEX_INPUTS:=$(foreach d,$(SECTION_DIRS),$d/question-manifest.tex)
ANSWER_TEX_INPUTS:=$(foreach d,$(SECTION_DIRS),$d/answer-manifest.tex)

LATEX_INCLUDES:=$(shell $(FIND) latex-includes -name "*.tex")

################################################################################
#
# Additional options for the coursehandbook document class to set up
# the details of the paper. These get included in a call to the
# \papersetup macro in the template file (including the options
# directly into the \documentclass is problematic --- see
# coursehandbook.cls for details). The values are set in
# latex-includes/paper_variables.make.
#
PAPER_OPTIONS:=subjectcode=$(SUBJECT_CODE),papernumber=$(PAPER_NUMBER),papertitle=$(PAPER_TITLE),paperyear=$(PAPER_YEAR),paperperiod=$(PAPER_PERIOD),authors=$(HANDBOOK_AUTHORS)

################################################################################
#
# Directory to install files into on web server.
#
INSTALL_DIRECTORY:=$(HANDBOOK_INSTALL_ROOT)/$(SUBJECT_CODE)$(PAPER_NUMBER)/Handbook

################################################################################
#
# Files to be installed on web server.
#
QUESTION_INSTALL_FILES:=handbook.pdf handbook-2up.pdf $(wildcard *.png)

ANSWER_INSTALL_FILES:= handbook-answers.pdf handbook-answers-2up.pdf \
	$(wildcard *.png)

# Sorting gets rid of any duplicates (e.g., the PNG files).
INSTALL_FILES:=$(sort $(QUESTION_INSTALL_FILES) $(ANSWER_INSTALL_FILES))

################################################################################
#
# Lists of files for cleaning up.
#
WEB_CLEAN_FILES:=*.png
PRINT_CLEAN_FILES:=handbook.tex handbook-answers.tex \
	*.pdf *.ps *.dvi *.aux *.log *.toc *.idx *.ind *.tex~ *.out
ALL_CLEAN_FILES:=$(WEB_CLEAN_FILES) $(PRINT_CLEAN_FILES)

################################################################################
#
# List of possible targets.
#
TARGETS:=all targets debug install \
	web web-questions web-answers \
	print print-questions print-answers \
	questions answers \
	section-questions section-answers \
	question-pdfs answer-pdfs \
	clean web-clean print-clean

.PHONY: $(TARGETS)

################################################################################
#
# Build everything.
#
all: web print

################################################################################
#
# Build questions/answers only.
#
questions: web-questions print-questions

answers: web-answers print-answers

################################################################################
#
# Build web version only. NOINIT and SECTION should be exported to all
# these sub-makes.
#
web: general-graphics web-questions web-answers

web-questions:
	@$(foreach d,$(SECTION_DIRS),if $(MAKE) -C $d web-questions NOINIT=x SECTION=$(notdir $(d)); then $(TRUE); else exit 1; fi;)

web-answers:
	@$(foreach d,$(SECTION_DIRS),if $(MAKE) -C $d web-answers NOINIT=x SECTION=$(notdir $(d)); then $(TRUE); else exit 1; fi;)

################################################################################
#
# Build print version only. NOINIT and SECTION should be exported to all
# these sub-makes.
#
print: general-graphics print-questions print-answers

print-questions: section-questions handbook.pdf handbook-2up.pdf question-pdfs

section-questions:
	@$(foreach d,$(SECTION_DIRS),if $(MAKE) -C $d print-questions NOINIT=x SECTION=$(notdir $(d)); then $(TRUE); else exit 1; fi;)

handbook.tex: handbook_template.tex $(QUESTION_TEX_INPUTS) $(LOCAL_HANDBOOK_INCLUDE)/questions.patterns $(LATEX_INCLUDES)
	@$(ANNOUNCE) "Generating $@"
	@$(ECHO) "% THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT!" > $@
	@$(ECHO) >> $@
	@$(PERL) -p -e "s|\<\@SHOWANSWERS\@\>|hideanswers|;" \
		-e "s|\<\@PAPEROPTIONS\@\>|$(PAPER_OPTIONS)|;" \
		$(foreach sect,$(SECTION_DIRS),-e "s|\<\@SECTION\[$(notdir $(sect))\]\@\>|\\\\input{$(basename $(filter $(sect)/%,$(QUESTION_TEX_INPUTS)))}|;") $< >> $@

question-pdfs:
	@$(foreach d,$(SECTION_DIRS),if $(MAKE) -C $d question-pdfs NOINIT=x SECTION=$(notdir $(d)); then $(TRUE); else exit 1; fi;)

#
# Answers
#
print-answers: section-answers handbook-answers.pdf handbook-answers-2up.pdf answer-pdfs

section-answers:
	@$(foreach d,$(SECTION_DIRS),if $(MAKE) -C $d print-answers NOINIT=x SECTION=$(notdir $(d)); then $(TRUE); else exit 1; fi;)

handbook-answers.tex: handbook_template.tex $(ANSWER_TEX_INPUTS) $(LOCAL_HANDBOOK_INCLUDE)/answers.patterns $(LATEX_INCLUDES)
	@$(ANNOUNCE) "Generating $@"
	@$(ECHO) "% THIS FILE IS AUTOMATICALLY GENERATED. DO NOT EDIT!" > $@
	@$(ECHO) >> $@
	@$(PERL) -p -e "s|\<\@SHOWANSWERS\@\>|showanswers|;" \
		-e "s|\<\@PAPEROPTIONS\@\>|$(PAPER_OPTIONS)|;" \
		$(foreach sect,$(SECTION_DIRS),-e "s|\<\@SECTION\[$(notdir $(sect))\]\@\>|\\\\input{$(basename $(filter $(sect)/%,$(ANSWER_TEX_INPUTS)))}|;") $< >> $@

answer-pdfs:
	@$(foreach d,$(SECTION_DIRS),if $(MAKE) -C $d answer-pdfs NOINIT=x SECTION=$(notdir $(d)); then $(TRUE); else exit 1; fi;)

#
# Generic rules for print version.
#
%.pdf: %.tex
	@$(ANNOUNCE) "pdflatex $< (pass 1)"
	$(PDFLATEX) --jobname=$(basename $<) '\def\LaTeXOptions{$(LATEX_OPTS)}\input{$<}'
	@$(ANNOUNCE) "pdflatex $< (pass 2)"
	$(PDFLATEX) --jobname=$(basename $<) '\def\LaTeXOptions{$(LATEX_OPTS)}\input{$<}'

%-2up.pdf: %.pdf
	@$(ANNOUNCE) "Generating $@"
	$(PDFNUP) --nup 2x1 --outfile $@ $<

################################################################################
#
# Build any general graphics that are used throughout the handbook. This uses
# the standard makefile for a content directory, but the only files in this
# directory are graphics files.
#
general-graphics:
	@if $(MAKE) -C graphics general-graphics BUILD_DIR=$(CURDIR); then $(TRUE); else exit 1; fi

################################################################################
#
# Deploy the appropriate files into a shared folder, which is then synchronised
# with Blackboard. This relies on the environment variable HANDBOOK_INSTALL_ROOT
# being defined, and (assuming that this variable points to a directory on the
# network) the appropriate share has been mounted.
#
# See build_document_rules.make for an explanation of why the install
# uses a foreach.
#
install: questions answers
	@$(SITECOPY) --catchup Blackboard$(PAPER_NUMBER)
	@$(ANNOUNCE) "Deploying handbook files to Blackboard --- make sure that you have the share mounted!"
	@$(TEST) -d $(HANDBOOK_INSTALL_ROOT)
	@$(MKDIR_P) $(INSTALL_DIRECTORY)
	@$(foreach d,$(SECTION_DIRS),if $(MAKE) -C $d $@ NOINIT=x SECTION=$(notdir $(d)); then $(TRUE); else exit 1; fi;)
	@$(ANNOUNCE) "Deploying files into $(INSTALL_DIRECTORY)"
	@$(foreach f,$(QUESTION_INSTALL_FILES),if $(TEST) ! -f $(INSTALL_DIRECTORY)/$(f) -o $(f) -nt $(INSTALL_DIRECTORY)/$(f); then $(ECHO) "Deploying $(f)"; $(CP) $(f) $(INSTALL_DIRECTORY); fi;)
	@$(foreach f,$(ANSWER_INSTALL_FILES),if $(TEST) ! -f $(INSTALL_DIRECTORY)/$(f) -o $(f) -nt $(INSTALL_DIRECTORY)/$(f); then $(ECHO) "Deploying $(f)"; $(CP) $(f) $(INSTALL_DIRECTORY); fi;)
	@$(ANNOUNCE) "Synchronising with Blackboard"
	@$(SITECOPY) --update Blackboard$(PAPER_NUMBER)

################################################################################
#
# Clean up all generated files.
# "web-clean" and "print-clean" only clean up files for the web and print
# versions, respectively. Note that "clean" isn't dependent on either
# "web-clean" or "print-clean", to ensure that the correct target is
# used when calling the sub-makefile.
#
clean:
	@$(foreach d,$(SECTION_DIRS),$(MAKE) -C $d $@;)
ifneq ($(strip $(ALL_CLEAN_FILES)),)
	-$(RM) -f $(ALL_CLEAN_FILES)
	@$(MAKE) -C graphics clean BUILD_DIR=$(CURDIR)
endif

web-clean:
	@$(foreach d,$(SECTION_DIRS),$(MAKE) -C $d $@;)
ifneq ($(strip $(WEB_CLEAN_FILES)),)
	-$(RM) -f $(WEB_CLEAN_FILES)
endif

print-clean:
	@$(foreach d,$(SECTION_DIRS),$(MAKE) -C $d $@;)
ifneq ($(strip $(PRINT_CLEAN_FILES)),)
	-$(RM) -f $(PRINT_CLEAN_FILES)
endif

################################################################################
#
# Debugging information, mostly lists of the generated variables.
#
debug:
	@$(ANNOUNCE) Externally defined variables
	@$(ECHO) "TEACHING_SHARED = [$(TEACHING_SHARED)]"
	@$(ECHO) "HANDBOOK_INSTALL_ROOT = [$(HANDBOOK_INSTALL_ROOT)]"
	@$(ANNOUNCE) Internally defined variables
	@$(ECHO) "GLOBAL_HANDBOOK_INCLUDE = [$(GLOBAL_HANDBOOK_INCLUDE)]"
	@$(ECHO) "LOCAL_HANDBOOK_INCLUDE = [$(LOCAL_HANDBOOK_INCLUDE)]"
	@$(ECHO) "SECTION_DIRS = [$(SECTION_DIRS)]"
	@$(ECHO) "QUESTION_TEX_INPUTS = [$(QUESTION_TEX_INPUTS)]"
	@$(ECHO) "ANSWER_TEX_INPUTS = [$(ANSWER_TEX_INPUTS)]"
	@$(ECHO) "LATEX_INCLUDES = [$(LATEX_INCLUDES)]"
	@$(ECHO) "LATEX_OPTS = [$(LATEX_OPTS)]"
	@$(ECHO) "INSTALL_DIRECTORY = [$(INSTALL_DIRECTORY)]"
	@$(ECHO) "INSTALL_FILES = [$(INSTALL_FILES)]"
	@$(ECHO) "QUESTION_INSTALL_FILES = [$(QUESTION_INSTALL_FILES)]"
	@$(ECHO) "ANSWER_INSTALL_FILES = [$(ANSWER_INSTALL_FILES)]"
	@$(ECHO) "QUESTION_INSTALL_PATTERNS = [$(QUESTION_INSTALL_PATTERNS)]"
	@$(ECHO) "ANSWER_INSTALL_PATTERNS = [$(ANSWER_INSTALL_PATTERNS)]"
	@$(ECHO) "WEB_CLEAN_FILES = [$(WEB_CLEAN_FILES)]"
	@$(ECHO) "PRINT_CLEAN_FILES = [$(PRINT_CLEAN_FILES)]"
	@$(ECHO) "ALL_CLEAN_FILES = [$(ALL_CLEAN_FILES)]"
	@$(ECHO) "SUBJECT_CODE = [$(SUBJECT_CODE)]"
	@$(ECHO) "PAPER_NUMBER = [$(PAPER_NUMBER)]"
	@$(ECHO) "PAPER_TITLE = [$(PAPER_TITLE)]"
	@$(ECHO) "PAPER_YEAR = [$(PAPER_YEAR)]"
	@$(ECHO) "PAPER_PERIOD = [$(PAPER_PERIOD)]"
	@$(ECHO) "HANDBOOK_AUTHORS = [$(HANDBOOK_AUTHORS)]"
	@$(ECHO) "PAPER_OPTIONS = [$(PAPER_OPTIONS)]"

################################################################################
#
# Print out the list of targets. Handy for when you forget!
#
targets:
	@$(ECHO) $(TARGETS)