- Added "question" template to stop bogus HTML generation when showanswers is switched on.

nigel.stanger / XML

Browse code - Added "question" template to stop bogus HTML generation when showanswers is switched on. master OLD_GRAPHICS_HANDLING
1 parent 451cc93 commit f5666813d4618cf500e80021f0976d2f9cf1f161 nstanger authored on 25 Jun 2004

Patch

Showing 1 changed file

Ignore Space Show notes View format-master.xml
<?xml version="1.0"?> <!-- This will mostly be a list of element names to match, along with the corresponding HTML and LaTeX handling XSLT code. --> <stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" > <template name="PaperCode" match="PaperCode"> <latex><xsl:value-of select="$department"/>~<xsl:value-of select="$paper"/></latex> <html> <xsl:value-of select="$department"/> <xsl:text disable-output-escaping="yes">&nbsp;</xsl:text> <xsl:value-of select="$paper"/> </html> </template> <template name="OracleServer" match="OracleServer"> <latex>Oracle9\textit{i}</latex> <html>Oracle9<I>i</I></html> </template> <template name="Blackboard" match="Blackboard"> <common> <xsl:call-template name="hyperlink-internal"> <xsl:with-param name="url">http://blackboard.otago.ac.nz/</xsl:with-param> <xsl:with-param name="label">Blackboard</xsl:with-param> </xsl:call-template> </common> </template> <!-- Plain paragraph. @indent: Whether or not to indent this paragraph (probably only relevant in LaTeX). 'no' => don't indent. otherwise => apply standard paragraph formatting. [default] @align: How to align the paragraph. Note that these are potentially distinct from the default action, e.g., specifying align="left" will produce a flushleft environment in LaTeX, which is not the same effect as not specifying an alignment. 'left' => left alignment 'center' => centered alignment 'right' => right alignment --> <template name="paragraph" match="paragraph\|para\|p\|P"> <latex> <xsl:text> </xsl:text> <xsl:choose> <xsl:when test="(@align = 'left') or (@align = 'right')"> <xsl:text>\begin{flush</xsl:text> <xsl:value-of select="@align"/> <xsl:text>}</xsl:text> <xsl:apply-templates/> <xsl:text>\end{flush</xsl:text> <xsl:value-of select="@align"/> <xsl:text>}</xsl:text> </xsl:when> <xsl:when test="@align = 'center'"> <xsl:text>\begin{center}</xsl:text> <xsl:apply-templates/> <xsl:text>\end{center}</xsl:text> </xsl:when> <xsl:otherwise> <xsl:if test="@indent = 'no'">\noindent </xsl:if> <xsl:apply-templates/> </xsl:otherwise> </xsl:choose> <xsl:text> </xsl:text> </latex> <!-- HTML is weird about what things you cannot include inside paragraphs (e.g. lists of any kind). However, the end P tag is optional, so one option might simply be not to output it. --> <html> <P> <xsl:if test="@align"> <xsl:attribute name="ALIGN"> <xsl:value-of select="@align"/> </xsl:attribute> </xsl:if> <xsl:apply-templates/> </P> </html> </template> <!-- Special characters (should maybe all be named, in case they need to be called explicitly with xsl:call-template) --> <!-- I'd like to use the Unicode names for these; will look them up some time! --> <template name="newline" match="newline\|line-break\|br"> <latex><xsl:text> \\ </xsl:text></latex> <html><BR/></html> </template> <!-- Whereas newline\|line-break is for line breaks intended to be outputted in the final document, this is for additional linebreaks in the generated latex or HTML source (for stuff like avoiding "\end{verbatim}\item" all on one line). --> <template name="newline-internal" match="newline-internal"> <latex><xsl:text> </xsl:text></latex> <html><xsl:text> </xsl:text></html> </template> <template name="page-break" match="page-break\|new-page\|newpage\|pagebreak"> <latex>\newpage</latex> </template> <template name="non-breaking-space" match="non-breaking-space\|nbsp"> <latex>~</latex> <html><xsl:text disable-output-escaping="yes">&nbsp;</xsl:text></html> </template> <!-- Technically we don't need to disable output escaping for all of these, but it's probably better to code them all consistently, rather than trying to figure out which ones do need it (e.g.,   for a non-breaking space) and which ones don't (e.g., &). --> <template name="ellipsis-sign" match="ellipsis-sign\|etc\|ellipsis\|dots"> <latex>{\ldots}</latex> <html><xsl:text disable-output-escaping="yes">&#8230;</xsl:text></html> </template> <!-- Misc typographic symbols --> <template name="endash" match="endash\|en-dash"> <latex>--</latex> <html><xsl:text disable-output-escaping="yes">&#8211;</xsl:text></html> </template> <template name="emdash" match="emdash\|em-dash"> <latex>---</latex> <html><xsl:text disable-output-escaping="yes">&#8212;</xsl:text></html> </template> <!-- Use this for literal underscores that appear outside code blocks. Such things cause LaTeX to wig out. --> <template name="underscore" match="underscore"> <latex>\_</latex> <html>_</html> </template> <template name="apostrophe" match="apostrophe"> <latex>'</latex> <html><xsl:text disable-output-escaping="yes">&#8217;</xsl:text></html> </template> <template name="dollar" match="dollar\|dollar-sign"> <latex>{\$}</latex> <html>$</html> </template> <template name="percent-sign" match="percent-sign\|percentage-sign\|percent"> <latex>{\%}</latex> <html>%</html> </template> <template name="ampersand" match="ampersand"> <latex>{\&}</latex> <html><xsl:text disable-output-escaping="yes">&amp;</xsl:text></html> </template> <template name="trademark-sign" match="trademark-sign\|trademark\|TM"> <latex>{\texttrademark}</latex> <html><xsl:text disable-output-escaping="yes">&#8482;</xsl:text></html> </template> <template name="copyright-sign" match="copyright-sign"> <latex>{\copyright}</latex> <html><xsl:text disable-output-escaping="yes">&#169;</xsl:text></html> </template> <template name="degree-sign" match="degree-sign\|degrees"> <latex>\ensuremath{^{\circ}}</latex> <html><xsl:text disable-output-escaping="yes">&#176;</xsl:text></html> </template> <template name="section-sign" match="section-sign"> <latex>{\S}</latex> <html><xsl:text disable-output-escaping="yes">&#167;</xsl:text></html> </template> <template name="paragraph-sign" match="paragraph-sign"> <latex>{\P}</latex> <html><xsl:text disable-output-escaping="yes">&#182;</xsl:text></html> </template> <!-- I think the pi symbol is only available in LaTeX in math mode, but if we're already in math mode, the extra $ signs will mess things up... --> <!-- Use \ensuremath to resolve the problem. --> <template name="pi" match="pi"> <latex>\ensuremath{\pi}</latex> <html><xsl:text disable-output-escaping="yes">&#960;</xsl:text></html> </template> <template name="LaTeX" match="LaTeX\|latex"> <latex>{\LaTeX}</latex> <html>L<SUP>A</SUP>T<SUB>E</SUB>X</html> </template> <!-- Note: no equivalent of \triangleright in HTML, use right arrow instead. --> <template name="menu-separator" match="menu-separator\|menusep\|menu/separator"> <latex> \ensuremath{\triangleright} </latex> <html><xsl:text disable-output-escaping="yes"> &#8594; </xsl:text></html> </template> <template name="menu-item" match="menu/item"> <latex>\textbf{<xsl:apply-templates/>}</latex> <html><B><xsl:apply-templates/></B></html> </template> <!-- Special styles --> <template name="emph" match="emph"> <latex>\emph{<xsl:apply-templates/>}</latex> <html><EM><xsl:apply-templates/></EM></html> </template> <template name="italic" match="italic"> <latex>\textit{<xsl:apply-templates/>}</latex> <html><I><xsl:apply-templates/></I></html> </template> <template name="strong" match="strong"> <latex>\textbf{<xsl:apply-templates/>}</latex> <html><STRONG><xsl:apply-templates/></STRONG></html> </template> <template name="bold" match="bold"> <latex>\textbf{<xsl:apply-templates/>}</latex> <html><B><xsl:apply-templates/></B></html> </template> <template name="term" match="term"> <latex>\term{<xsl:apply-templates/>}</latex> <html><I CLASS="term"><xsl:apply-templates/></I></html> </template> <template name="foreign" match="foreign"> <latex>\foreign{<xsl:apply-templates/>}</latex> <html><I CLASS="foreign"><xsl:apply-templates/></I></html> </template> <template name="code" match="code"> <!-- <latex>\code{<xsl:apply-templates/>}</latex> --> <!-- Using \verb is quite handy because things like underscores don't bother it. However, it seems it can't be used inside hyperlinks. Maybe create another template that just does a \texttt on the contents? --> <!-- OK, but then we need an <underscore> element to stop them from freaking LaTeX out. --> <latex>\verb+<xsl:apply-templates/>+</latex> <html><CODE><xsl:apply-templates/></CODE></html> </template> <template name="typewriter" match="typewriter\|monospace\|tt"> <latex>\texttt{<xsl:apply-templates/>}</latex> <html><CODE><xsl:apply-templates/></CODE></html> </template> <template name="sans-serif" match="sans-serif\|sans\|ss\|sf"> <latex>\textsf{<xsl:apply-templates/>}</latex> <html><FONT FACE="sans-serif"><xsl:apply-templates/></FONT></html> </template> <!-- Non-maths super- and subscript. --> <template name="superscript" match="superscript"> <latex>\ensuremath{^{\mathrm{<xsl:apply-templates/>}}}</latex> <html><SUP><xsl:apply-templates/></SUP></html> </template> <template name="subscript" match="subscript"> <latex>\ensuremath{_{\mathrm{<xsl:apply-templates/>}}}</latex> <html><SUB><xsl:apply-templates/></SUB></html> </template> <!-- Text that shouldn't be broken across a line (i.e., LaTeX \mbox). Only really relevant for LaTeX because we can't control this in HTML. --> <template name="no-break" match="no-break\|mbox"> <latex>\mbox{<xsl:apply-templates/>}</latex> <html><xsl:apply-templates/></html> </template> <!-- Skip a certain amount of space vertically. Probably more relevant to LaTeX than HTML. Is it even possible to vskip a set amount in HTML?? @size: the amount of space to skip. missing => \vskip\baselineskip [default] 'small' => \smallskip 'medium' => \medskip 'large' => \bigskip 'fill' => \vfill LaTeX length => \vskipxx --> <template name="vertical-skip" match="vertical-skip\|vskip"> <latex> <xsl:choose> <xsl:when test="not(@size)"> \vskip\baselineskip </xsl:when> <xsl:when test="@size='small'"> \smallskip </xsl:when> <xsl:when test="@size='medium'"> \medskip </xsl:when> <xsl:when test="@size='large'"> \bigskip </xsl:when> <xsl:when test="@size='fill'"> \vfill </xsl:when> <xsl:otherwise> \vskip<xsl:value-of select="@size"/> </xsl:otherwise> </xsl:choose> </latex> <!-- For the moment we'll just throw in a BR :) --> <html><BR/></html> </template> <!-- We can decide later whether to use plain verbatim or listings. --> <template name="code-block" match="code-block"> <latex> <xsl:call-template name="newline-internal"/> <!-- If the code-block specifies "allow-breaks='no'", wrap the verbatim inside a minipage to avoid page breaks within the code. --> <xsl:if test="@allow-breaks = 'no'"> <xsl:text>\vskip\baselineskip</xsl:text> <xsl:call-template name="newline-internal"/> <xsl:text>\begin{minipage}{\textwidth}</xsl:text> <xsl:call-template name="newline-internal"/> </xsl:if> <xsl:text>\begin{verbatim}</xsl:text> <xsl:apply-templates/> <xsl:text>\end{verbatim}</xsl:text> <xsl:call-template name="newline-internal"/> <xsl:if test="@allow-breaks = 'no'"> <xsl:text>\end{minipage}</xsl:text> <xsl:call-template name="newline-internal"/> <xsl:text>\vskip\baselineskip</xsl:text> <xsl:call-template name="newline-internal"/> </xsl:if> </latex> <html> <PRE CLASS="code"><xsl:apply-templates/></PRE> </html> </template> <!-- This is for stuff that should unequivocally be treated verbatim (e.g. problem code). I'm pretty sure that previously this was distinguished from "code-block" because it (code-block) used to use listings instead of verbatim. Now that they're both using verbatim there is probably no need for them both (but we might switch back to using listings for code-block). --> <template name="verbatim" match="verbatim"> <latex> <xsl:call-template name="newline-internal"/> <xsl:text>\begin{verbatim}</xsl:text> <xsl:apply-templates/> <xsl:text>\end{verbatim}</xsl:text> <xsl:call-template name="newline-internal"/> </latex> <html> <PRE><xsl:apply-templates/></PRE> </html> </template> <!-- Quoted text. Handles nested quotes correctly. @single: Whether to enclose the text in single or double quotes. 'yes' => single quotes (''). otherwise => double quotes (""). [default] --> <template name="single-quote" match="quote[@single='yes']\|q[@single='yes']"> <latex>`<xsl:apply-templates/>'</latex> <html> <xsl:text disable-output-escaping="yes">&#8216;</xsl:text> <xsl:apply-templates/> <xsl:text disable-output-escaping="yes">&#8217;</xsl:text> </html> </template> <template name="double-quote" match="quote\|qq"> <latex>``<xsl:apply-templates/>''</latex> <html> <xsl:text disable-output-escaping="yes">&#8220;</xsl:text> <xsl:apply-templates/> <xsl:text disable-output-escaping="yes">&#8221;</xsl:text> </html> </template> <!-- With nested quotes, we need to figure out what depth of nesting we're at, then call the appropriate template depending on the initial quoting style (single or double). --> <template name="nested-double-quote" match="quote//quote"> <common> <xsl:choose> <xsl:when test="(count(ancestor::quote) mod 2) = 0"> <xsl:call-template name="double-quote"/> </xsl:when> <xsl:otherwise> <xsl:call-template name="single-quote"/> </xsl:otherwise> </xsl:choose> </common> </template> <template name="nested-single-quote" match="quote[@single='yes']//quote" priority="2"> <common> <xsl:choose> <xsl:when test="(count(ancestor::quote) mod 2) = 0"> <xsl:call-template name="single-quote"/> </xsl:when> <xsl:otherwise> <xsl:call-template name="double-quote"/> </xsl:otherwise> </xsl:choose> </common> </template> <!-- Environments (in the LaTeX terminology): enumerated, ordered, and numbered lists. --> <!-- Unordered lists --> <template name="itemised-list" match="itemised-list\|itemize\|unordered-list\|bulleted-list\|bullet-list\|bullet-points\|UL\|ul"> <latex> \begin{itemize} <xsl:apply-templates/> \end{itemize} </latex> <html> <UL> <xsl:apply-templates/> </UL> </html> </template> <!-- Ordered lists --> <template name="enumerated-list" match="enumerated-list\|enumerate\|ordered-list\|numbered-list\|question-list\|OL\|ol"> <latex> \begin{enumerate} <xsl:apply-templates/> \end{enumerate} </latex> <html> <OL> <xsl:apply-templates/> </OL> </html> </template> <!-- Definition or description lists. --> <template name="definition-list" match="definition-list\|description-list\|DL\|dl"> <latex> \begin{description} <xsl:apply-templates mode="definition-list"/> \end{description} </latex> <html> <!-- Hmm, <DL>s in HTML tend to come out with the spacing a bit wrong (or maybe it's just my browser?). Might using a table be better? Messy if the keyword is long, though, and you don't get a proper hanging indent... Maybe this is something that could be handled in CSS instead. --> <DL> <xsl:apply-templates mode="definition-list"/> </DL> <!-- <TABLE BORDER="0" CELLPADDING="10"> --> <!-- <xsl:apply-templates/> --> <!-- </TABLE> --> </html> </template> <!-- List elements --> <template name="list-item" match="item"> <latex><xsl:text>\item </xsl:text><xsl:apply-templates/></latex> <html> <xsl:choose> <!-- Check whether there are actual paragraphs or things that should be treated like paragraphs inside the item. If so, let them worry about inserting the <P> tags. --> <xsl:when test="count(paragraph\|para\|p\|question\|answer) != 0"> <LI><xsl:apply-templates/></LI> </xsl:when> <!-- Otherwise, insert <P> tags surrounding the item content so that the item spacing looks OK. --> <xsl:otherwise> <LI><P><xsl:apply-templates/></P></LI> </xsl:otherwise> </xsl:choose> </html> </template> <template name="definition-item" match="item" mode="definition-list"> <latex> <xsl:text>\item[</xsl:text> <xsl:apply-templates select="keyword\|topic\|DT\|dt"/> <xsl:text>] </xsl:text> <xsl:apply-templates select="definition\|description\|discourse\|DD\|dd"/> </latex> <html> <DT><P><xsl:apply-templates select="keyword\|topic\|DT\|dt"/></P></DT> <DD><xsl:apply-templates select="definition\|description\|discourse\|DD\|dd"/></DD> <!-- <TR VALIGN="TOP"> --> <!-- <TD><P><xsl:apply-templates select="keyword"/></P></TD> --> <!-- <TD><xsl:apply-templates select="definition\|description\|discourse"/></TD> --> <!-- </TR> --> </html> </template> <template name="keyword" match="keyword\|topic\|DT\|dt"> <latex><xsl:apply-templates/></latex> <html><STRONG><xsl:apply-templates/></STRONG></html> </template> <!-- Need to provide some context here as, e.g., <description> is also used within <image>. --> <template name="definition" match="item/definition\|item/description\|item/discourse\|item/DD\|item/dd"> <latex><xsl:apply-templates/></latex> <html> <xsl:choose> <xsl:when test="count(paragraph\|para\|p) != 0"> <xsl:apply-templates/> </xsl:when> <xsl:otherwise> <P><xsl:apply-templates/></P> </xsl:otherwise> </xsl:choose> </html> </template> <!-- Question text. This only exists so that we can ensure that appropriate <P> tags are correctly inserted. If this template didn't exist, showing the answers would generate invalid HTML. The answers are enclosed in a <DIV CLASS="answer">...</DIV>. Without this template, the answer markup ends up embedded inside <P>...</P>, which is invalid. --> <template name="question" match="question"> <latex><xsl:apply-templates/></latex> <html> <xsl:choose> <!-- Check whether there are actual paragraphs inside the question. If so, let them worry about inserting the <P> tags. --> <xsl:when test="count(paragraph\|para\|p\|question\|answer) != 0"> <xsl:apply-templates/> </xsl:when> <!-- Otherwise, insert <P> tags surrounding the question content. --> <xsl:otherwise> <P><xsl:apply-templates/></P> </xsl:otherwise> </xsl:choose> </html> </template> <!-- Sample answers, which may optionally be excluded from the output. --> <template name="answer" match="answer"> <latex> <!-- It's nice to weed out the sample answer markup at the XSLT processing stage to make LaTeX run faster. Note that \showanswers still needs to be called so that LaTeX can format chapter headings like "Answers for ..." --> <xsl:if test="$showanswers='yes'"> \begin{answer} <xsl:apply-templates/> \end{answer} </xsl:if> </latex> <html> <xsl:if test="$showanswers='yes'"> <DIV CLASS="answer"> <xsl:apply-templates/> </DIV> </xsl:if> </html> </template> <!-- Sections, subsections, subsubsections, ... @label: A label that can be used for cross referencing. Any value can be used, as long as it's a legal identifier in both LaTeX and HTML. --> <template name="section" match="section"> <latex> <xsl:apply-templates> <xsl:with-param name="label"> <xsl:value-of select="@label"/> <xsl:if test="not(@label)">THERE_IS_NO_LABEL</xsl:if> </xsl:with-param> </xsl:apply-templates> </latex> <html> <xsl:if test="@label"><A NAME="{@label}"></A></xsl:if> <xsl:apply-templates/> </html> </template> <!-- Footnotes. --> <template name="footnote" match="footnote"> <latex>\footnote{<xsl:apply-templates/>}</latex> <html> <A> <xsl:attribute name="NAME"> <xsl:text>footnote-</xsl:text> <xsl:number level="any" count="footnote"/> <xsl:text>-source</xsl:text> </xsl:attribute> <xsl:attribute name="HREF"> <xsl:text>#footnote-</xsl:text> <xsl:number level="any" count="footnote"/> <xsl:text>-target</xsl:text> </xsl:attribute> <xsl:text>[</xsl:text> <xsl:number level="any" count="footnote"/> <xsl:text>]</xsl:text> </A> </html> </template> <!-- This is only required for HTML, as LaTeX does it all for you. --> <template name="footnote-list" match="footnote" mode="list"> <html> <P> <A> <xsl:attribute name="NAME"> <xsl:text>footnote-</xsl:text> <xsl:number level="any" count="footnote"/> <xsl:text>-target</xsl:text> </xsl:attribute> <xsl:text>[</xsl:text> <xsl:number level="any" count="footnote"/> <xsl:text>]</xsl:text> </A> <xsl:text> </xsl:text> <xsl:apply-templates/> <xsl:text> </xsl:text> <!-- Provide a back link to the original footnote marker. --> <A> <xsl:attribute name="HREF"> <xsl:text>#footnote-</xsl:text> <xsl:number level="any" count="footnote"/> <xsl:text>-source</xsl:text> </xsl:attribute> <xsl:text>[Back]</xsl:text> </A> </P> </html> </template> <!-- Document preamble stuff: title, author, date. --> <template name="preamble-title" match="document/title" mode="preamble"> <latex>\title{<xsl:apply-templates/>}</latex> <html> <xsl:apply-templates/> </html> </template> <template name="preamble-author" match="document/author" mode="preamble"> <latex>\author{<xsl:apply-templates/>}</latex> </template> <template name="preamble-date" match="document/date" mode="preamble"> <latex>\date{<xsl:apply-templates/>}</latex> </template> <template name="document-title" match="document/title"> <!-- Need to do something sensible for LaTeX here. --> <latex> <!-- Under the LaTeX framework, the rest of the chapter title text is generated by LaTeX macros, so this is pretty simple. --> <!-- I think this is broken? --> <xsl:if test="/document/@standalone = 'yes'"><xsl:apply-templates/></xsl:if> </latex> <html> <xsl:choose> <xsl:when test="/document/@class = 'tutorial'"> <H1><xsl:call-template name="PaperCode"/> Tutorial <xsl:value-of select="/document/@sequence-number"/><xsl:if test="$showanswers='yes'"> Sample Answers</xsl:if>: <BR/><xsl:apply-templates/></H1> </xsl:when> <xsl:when test="/document/@class = 'laboratory'"> <H1><xsl:call-template name="PaperCode"/> Lab <xsl:value-of select="/document/@sequence-number"/><xsl:if test="$showanswers='yes'"> Sample Answers</xsl:if>: <BR/><xsl:apply-templates/></H1> </xsl:when> <xsl:otherwise> <H1><xsl:apply-templates/></H1> </xsl:otherwise> </xsl:choose> </html> </template> <!-- New template for tutorials and labs, which are essentially chapters when included in a course book, but are marked up as documents in themselves. --> <template name="chapter-title" match="document/title" mode="chapter"> <latex> <xsl:apply-templates/> </latex> <html> <xsl:choose> <xsl:when test="/document/@class = 'tutorial'"> <H1><xsl:call-template name="PaperCode"/> Tutorial <xsl:value-of select="/document/@sequence-number"/><xsl:if test="$showanswers='yes'"> Sample Answers</xsl:if>: <BR/><xsl:apply-templates/></H1> </xsl:when> <xsl:when test="/document/@class = 'laboratory'"> <H1><xsl:call-template name="PaperCode"/> Lab <xsl:value-of select="/document/@sequence-number"/><xsl:if test="$showanswers='yes'"> Sample Answers</xsl:if>: <BR/><xsl:apply-templates/></H1> </xsl:when> <xsl:otherwise> <H1><xsl:apply-templates/></H1> </xsl:otherwise> </xsl:choose> </html> </template> <template name="document-author" match="document/author"/> <template name="document-date" match="document/date"/> <!-- Generate some number of "sub"s so we can produce, e.g., "subsubsection" for LaTeX. $depth: the number of repetitions (0 <= $depth <= 2, but there's no need to do bounds checking at the upper end, because that's already dealt with in the "section-title" template below). --> <template name="generate-subs"> <latex> <xsl:param name="depth">1</xsl:param> <xsl:if test="$depth > 1"> <xsl:text>sub</xsl:text> <xsl:call-template name="generate-subs"> <xsl:with-param name="depth"><xsl:value-of select="$depth - 1"/></xsl:with-param> </xsl:call-template> </xsl:if> </latex> </template> <!-- Generate section title with nested numbering, e.g., 1.1.3. --> <template name="section-title" match="section/title"> <latex> <xsl:param name="label"/> <xsl:text>\</xsl:text> <!-- Generate the correct number of "sub"s for LaTeX. --> <xsl:call-template name="generate-subs"> <xsl:with-param name="depth"> <xsl:number value="count(ancestor::section)"/> <xsl:if test="count(ancestor::section) > 3">3</xsl:if> </xsl:with-param> </xsl:call-template> <xsl:text>section{</xsl:text> <xsl:apply-templates/><xsl:text>}</xsl:text> <xsl:if test="$label != 'THERE_IS_NO_LABEL'"> \label{<xsl:value-of select="$label"/>} </xsl:if> </latex> <html> <!-- The depth is used in a couple of places, so we pre-calculate it. --> <xsl:variable name="depth"> <xsl:number value="1 + count(ancestor::section)"/> <xsl:if test="1 + count(ancestor::section) > 6">6</xsl:if> </xsl:variable> <xsl:text disable-output-escaping="yes"><H</xsl:text><xsl:number value="$depth"/><xsl:text disable-output-escaping="yes">></xsl:text> <xsl:number count="section" level="multiple" format="1.1.1.1.1.1"/> <xsl:text> </xsl:text> <xsl:apply-templates/> <xsl:text disable-output-escaping="yes"></H</xsl:text><xsl:number value="$depth"/><xsl:text disable-output-escaping="yes">></xsl:text> </html> </template> <!-- A quotation. @align: The alignment of the quotation paragraph. 'left' [default] 'center' 'right' --> <template name="quotation" match="quotation"> <latex> <xsl:choose> <xsl:when test="(@align = 'left') or (@align = 'right')"> <xsl:text>\begin{flush</xsl:text> <xsl:value-of select="@align"/> <xsl:text>}\itshape </xsl:text> <xsl:apply-templates/> <xsl:text>\end{flush</xsl:text> <xsl:value-of select="@align"/> <xsl:text>}</xsl:text> </xsl:when> <xsl:when test="@align = 'center'"> <xsl:text>\begin{center}\itshape </xsl:text> <xsl:apply-templates/> <xsl:text>\end{center}</xsl:text> </xsl:when> <xsl:otherwise> <xsl:text>\begin{quote}\itshape </xsl:text> <xsl:apply-templates/> <xsl:text>\end{quote}</xsl:text> </xsl:otherwise> </xsl:choose> </latex> <!-- Nominally we should use <BLOCKQUOTE>, but it doesn't have alignment. --> <html> <P> <xsl:if test="@align"> <xsl:attribute name="ALIGN"> <xsl:value-of select="@align"/> </xsl:attribute> </xsl:if> <I><xsl:apply-templates/></I> </P> </html> </template> <!-- Anything inside a <metadata> is ignored completely. (More accurately, we pick bits out of it manually as required; it's only ignored by apply-templates.) If we move to using attributes of "document" for all metadata, this will become redundant. --> <template name="metadata" match="metadata"> <common> <xsl:message><xsl:text>Use of metadata element obsolete!</xsl:text></xsl:message> </common> </template> <!-- Anything inside an <omit> is also ignored completely. --> <template name="omit" match="omit"/> <!-- ...and the legacy id tags inside figures. --> <template match="figure/id"/> <template match="figure/label"/> <!-- Comments are not quite ignored completely, as they're carried through to the output document (kind of: "It is an error if instantiating the content of xsl:comment creates nodes other than text nodes.") --> <template name="comment" match="comment"> <latex> <xsl:text> \begin{comment}</xsl:text> <xsl:apply-templates/> <xsl:text>\end{comment} </xsl:text> </latex> <html> <xsl:comment> <xsl:apply-templates/> </xsl:comment> </html> </template> <!-- Tabular structures (LaTeX {tabular}, HTML <TABLE>). @align: The alignment of the table as a whole. 'left' [default] 'center' 'right' @border: Width of cell border for HTML tables. --> <template name="tabular" match="tabular"> <latex> <!-- Overall table alignment. --> <xsl:if test="@align"> <xsl:text> \begin{</xsl:text> <xsl:choose> <xsl:when test="(@align = 'left') or (@align = 'right')"> <xsl:text>flush</xsl:text><xsl:value-of select="@align"/> </xsl:when> <xsl:when test="@align = 'center'"> <xsl:text>center</xsl:text> </xsl:when> </xsl:choose> <xsl:text>}</xsl:text> </xsl:if> <xsl:text> \begin{tabular}{</xsl:text> <xsl:apply-templates select="tabular-columns"/> <xsl:text>}</xsl:text> <xsl:apply-templates select="tabular-header"/> <xsl:apply-templates select="tabular-body"/> <xsl:apply-templates select="tabular-footer"/> <xsl:text>\end{tabular} </xsl:text> <xsl:if test="@align"> <xsl:text>\end{</xsl:text> <xsl:choose> <xsl:when test="(@align = 'left') or (@align = 'right')"> <xsl:text>flush</xsl:text><xsl:value-of select="@align"/> </xsl:when> <xsl:when test="@align = 'center'"> <xsl:text>center</xsl:text> </xsl:when> </xsl:choose> <xsl:text>} </xsl:text> </xsl:if> </latex> <html> <TABLE> <xsl:attribute name="BORDER"> <xsl:value-of select="@border"/> <xsl:if test="not(@border)">0</xsl:if> </xsl:attribute> <xsl:if test="@align"> <xsl:attribute name="ALIGN"> <xsl:value-of select="@align"/> </xsl:attribute> </xsl:if> <!-- Note different ordering of tabular components: HTML requires THEAD and TFOOT to precede TBODY. --> <xsl:apply-templates select="tabular-header"/> <xsl:apply-templates select="tabular-footer"/> <xsl:apply-templates select="tabular-body"/> </TABLE> </html> </template> <!-- Specify column formatting, mainly for LaTeX, although HTML does get <TD> ALIGN values from here. @align: The alignment of this particular column. 'left' [default] 'center' 'right' @left-border: Set to '\|' to include a column separator to the left of this column. @right-border: Set to '\|' to include a column separator to the right of this column. Careful: including a right-border on a cell and a left-border on the next cell will produce '\|\|', not '\|'. BUT, when doing multi-column or multi-row cells, always include both borders if required, because \multicolumn overrides the default border specification. --> <template name="aligned-tabular-column" match="tabular-columns/column[@align]"> <latex> <xsl:value-of select="@left-border"/> <xsl:value-of select="substring(@align, 1, 1)"/> <xsl:value-of select="@right-border"/> </latex> </template> <template name="unaligned-tabular-column" match="tabular-columns/column[not(@align)]"> <latex> <xsl:value-of select="@left-border"/> <xsl:text>l</xsl:text> <xsl:value-of select="@right-border"/> </latex> </template> <template name="tabular-header" match="tabular-header"> <latex></latex> <html> <THEAD> <xsl:apply-templates/> </THEAD> </html> </template> <template name="tabular-footer" match="tabular-footer"> <latex></latex> <html> <TFOOT> <xsl:apply-templates/> </TFOOT> </html> </template> <template name="tabular-body" match="tabular-body"> <latex><xsl:apply-templates/></latex> <html> <TBODY> <xsl:apply-templates/> </TBODY> </html> </template> <!-- @no-page-break: Inhibit page breaks after this row (LaTeX only). --> <template name="row" match="row"> <latex> <xsl:apply-templates/> <xsl:text> \\</xsl:text> <xsl:if test="@no-page-break = 'yes'"></xsl:if> <xsl:text> </xsl:text> </latex> <html> <TR> <xsl:if test="@valign"> <xsl:attribute name="VALIGN"><xsl:value-of select="@valign"/></xsl:attribute> </xsl:if> <xsl:apply-templates/> </TR> </html> </template> <!-- Horizontal rules (LaTeX only). @columns: The column range to draw the rule across. Specify as you would for a \cline in LaTeX, e.g., '3-5'. If omitted, the rule is drawn across all columns. --> <template name="row-rule-full" match="row-rule[not(@columns)]"> <latex><xsl:text>\hline </xsl:text></latex> </template> <template name="row-rule-partial" match="row-rule[@columns]"> <latex>\cline{<xsl:value-of select="@columns"/>}</latex> </template> <!-- Hmm, the multi-row stuff is somewhat broken in LaTeX, oops. Need to insert missing columns (as was done in the calendar XSL) when a multi-row cell is encountered. Also need to sort out \hlines in the presence of multi-row cells and also what happens to vertical cell borders :( This probably needs reworking. --> <!-- Multi-row cells (LaTeX only, as this is pretty trivial to achieve in HTML). @rows: The number of rows this cell spans. @header: Is this a header cell? [yes, NO] --> <template name="multirow-cell" match="cell" mode="latex-multi-row"> <latex> <xsl:text>\multirow{</xsl:text> <xsl:value-of select="@rows"/> <xsl:text>}{}{</xsl:text> <xsl:if test="@header = 'yes'"><xsl:text>\textbf{</xsl:text></xsl:if> <xsl:apply-templates/> <xsl:if test="@header = 'yes'"><xsl:text>}</xsl:text></xsl:if> <xsl:text>}</xsl:text> </latex> </template> <!-- Multi-column cells (LaTeX only, as this is pretty trivial to achieve in HTML). $num-columns: The number of rows this cell spans. @header: Is this a header cell? [yes, NO] --> <template name="multicolumn-cell" match="cell" mode="latex-multi-column"> <latex> <xsl:param name="num-columns">1</xsl:param> <xsl:text>\multicolumn{</xsl:text> <xsl:value-of select="$num-columns"/> <xsl:text>}{</xsl:text> <xsl:value-of select="@left-border"/> <xsl:choose> <xsl:when test="@align"> <xsl:value-of select="substring(@align, 1, 1)"/> </xsl:when> <xsl:otherwise> <xsl:text>l</xsl:text> </xsl:otherwise> </xsl:choose> <xsl:value-of select="@right-border"/> <xsl:text>}{</xsl:text> <xsl:choose> <xsl:when test="@rows"> <xsl:apply-templates select="." mode="multi-row"/> </xsl:when> <xsl:otherwise> <xsl:if test="@header = 'yes'"><xsl:text>\textbf{</xsl:text></xsl:if> <xsl:apply-templates/> <xsl:if test="@header = 'yes'"><xsl:text>}</xsl:text></xsl:if> </xsl:otherwise> </xsl:choose> <xsl:text>}</xsl:text> </latex> </template> <!-- Top-level template for generating cells. @columns: The number of columns this cell spans. @rows: The number of rows this cell spans. @align: The alignment of this cell. [LEFT, center, right] @header: Is this a header cell? [yes, NO] --> <template match="cell"> <common> <!-- position() doesn't seem to work very well in this context. --> <xsl:variable name="column-no"><xsl:number/></xsl:variable> </common> <!-- Doing this sensibly for LaTeX is actually pretty ugly, because different attribute combinations produce different code :( This is the sort of algorithm that can only really be clearly described by a flow chart :) --> <latex> <xsl:choose> <xsl:when test="@columns"> <xsl:apply-templates select="." mode="latex-multi-column"> <xsl:with-param name="num-columns" select="@columns"/> </xsl:apply-templates> </xsl:when> <xsl:when test="@align"> <xsl:apply-templates select="." mode="latex-multi-column"/> </xsl:when> <xsl:when test="@rows"> <xsl:apply-templates select="." mode="latex-multi-row"/> </xsl:when> <xsl:otherwise> <xsl:if test="@header = 'yes'"><xsl:text>\textbf{</xsl:text></xsl:if> <xsl:apply-templates/> <xsl:if test="@header = 'yes'"><xsl:text>}</xsl:text></xsl:if> </xsl:otherwise> </xsl:choose> <xsl:if test="$column-no != last()"> & </xsl:if> </latex> <!-- It's much easier in HTML, because a <TD> is a <TD> is a <TD>, regardless of the attributes supplied. --> <html> <!-- Hmm, how to generate either a TD or TH as required, including attributes, without repeating code? Aha, the answer is attribute value templates! --> <xsl:variable name="celltype"> <xsl:choose> <xsl:when test="@header = 'yes'">TH</xsl:when> <xsl:otherwise>TD</xsl:otherwise> </xsl:choose> </xsl:variable> <xsl:element name="{$celltype}"> <xsl:attribute name="ALIGN"> <xsl:value-of select="@align"/> <xsl:if test="not(@align)"> <xsl:value-of select="ancestor::tabular/tabular-columns/column[position() = $column-no]/@align"/> <xsl:if test="not(ancestor::tabular/tabular-columns/column[position() = $column-no]/@align)">left</xsl:if> </xsl:if> </xsl:attribute> <xsl:attribute name="VALIGN"> <xsl:value-of select="@valign"/> <xsl:if test="not(@valign)">middle</xsl:if> </xsl:attribute> <xsl:attribute name="COLSPAN"> <xsl:value-of select="@columns"/> <xsl:if test="not(@columns)">1</xsl:if> </xsl:attribute> <xsl:attribute name="ROWSPAN"> <xsl:value-of select="@rows"/> <xsl:if test="not(@rows)">1</xsl:if> </xsl:attribute> <xsl:apply-templates/> </xsl:element> </html> </template> <!-- Hyperlinks. The content of the element is the hyperlink text. @label: A label that the hyperlink links to. The value should be an acceptable label in both LaTeX and HTML. [optional] @url: A URL that the hyperlink links to. If no link text is provided, the URL is used as the link text. [optional] --> <template name="hyperlink-label" match="hyperlink[@label]"> <latex>\hyperref[<xsl:value-of select="@label"/>]{<xsl:apply-templates/>}</latex> <html><A HREF="#{@label}"><xsl:apply-templates/></A></html> </template> <template name="hyperlink-url" match="hyperlink[@url and node()]"> <latex>\href{<xsl:value-of select="@url"/>}{<xsl:apply-templates/>}</latex> <html><A HREF="{@url}"><xsl:apply-templates/></A></html> </template> <!-- Internal parameterised hyperlink template to be called by the likes of the empty Oracle documentation elements. --> <template name="hyperlink-internal" match="hyperlink" mode="hyperlink-internal"> <common> <xsl:param xmlns:xsl-out="http://www.w3.org/1999/XSL/Transform" name="url"/> <xsl:param xmlns:xsl-out="http://www.w3.org/1999/XSL/Transform" name="label"/> </common> <latex>\href{<xsl:value-of select="$url"/>}{<xsl:apply-templates select="exsl:node-set($label)"/>}</latex> <html><A HREF="{$url}"><xsl:apply-templates select="exsl:node-set($label)"/></A></html> </template> <template name="empty-hyperlink-url" match="hyperlink[@url and not(node())]"> <!-- Note: not safe to use the url package here because \url{...} is fragile. --> <latex>\href{<xsl:value-of select="@url"/>}{\texttt{<xsl:value-of select="@url"/>}}</latex> <html><A HREF="{@url}"><CODE><xsl:value-of select="@url"/></CODE></A></html> </template> <!-- A plain URL (i.e., not necessarily a hyperlink). --> <template name="url" match="url\|uri\|email\|e-mail\|email-address\|e-mail-address"> <!-- Hmm, \url{...} appears to turn the URL into a non-functional link in PDF output (probably an interaction with hyperref). Not really what we want (as the link aspect is already dealt with by the <hyperlink> templates), so we'll just use \texttt{...}. --> <latex>\texttt{<xsl:apply-templates/>}</latex> <html><CODE><xsl:apply-templates/></CODE></html> </template> <!-- References. Note the distinction betwen these and hyperlinks: a reference is merely something like "see Section 2.3", and doesn't necessarily imply a hyperlink, or vice versa. @label: The label of the item that we're referencing. It must be a valid label in both LaTeX and HTML. [required] --> <template name="reference" match="reference"> <common> <!-- Find the element whose label is the same as our label. --> <xsl:apply-templates select="//[@label = current()/@label]" mode="reference"/> </common> </template> <!-- Do a separate template for each type of reference; easier. --> <template name="section-reference" match="section" mode="reference"> <!-- It's probably more consistent to just use \ref and insert "Section" ourselves rather than let LaTeX do it. --> <latex>Section~\ref{<xsl:value-of select="@label"/>}</latex> <html> <xsl:text disable-output-escaping="yes">Section&#160;</xsl:text> <xsl:number count="section" level="multiple" format="1.1.1.1.1.1"/> </html> </template> <template name="figure-reference" match="figure" mode="reference"> <latex>Figure~\ref{<xsl:value-of select="@label"/>}</latex> <html> <xsl:text disable-output-escaping="yes">Figure&#160;</xsl:text> <xsl:choose> <xsl:when test="$showanswers='yes'"> <xsl:number count="figure" level="any" format="1"/> </xsl:when> <xsl:otherwise> <xsl:number count="figure[not(ancestor::answer) and not(ancestor::omit) and not(ancestor::comment)]" level="any" format="1"/> </xsl:otherwise> </xsl:choose> </html> </template> <template name="table-reference" match="table" mode="reference"> <latex>Table~\ref{<xsl:value-of select="@label"/>}</latex> <html> <xsl:text disable-output-escaping="yes">Table&#160;</xsl:text> <xsl:choose> <xsl:when test="$showanswers='yes'"> <xsl:number count="table" level="any" format="1"/> </xsl:when> <xsl:otherwise> <xsl:number count="table[not(ancestor::answer) and not(ancestor::omit) and not(ancestor::comment)]" level="any" format="1"/> </xsl:otherwise> </xsl:choose> </html> </template> <!-- Figures & tables (in the LaTeX sense, i.e., "floating" items). --> <template name="figure" match="figure"> <latex> \begin{figure}<xsl:if test="@latex-placement">[<xsl:value-of select="@latex-placement"/>]</xsl:if> \centering <xsl:apply-templates select="[not(self::caption)]"/> <xsl:if test="count(caption) != 0"> \caption{<xsl:apply-templates select="caption"/>} <xsl:if test="@label">\label{<xsl:value-of select="@label"/>}</xsl:if> <xsl:if test="count(id) != 0">\label{<xsl:value-of select="id"/>}</xsl:if> </xsl:if> \end{figure} </latex> <html> <DIV CLASS="figure"> <CENTER> <xsl:if test="@label"><A NAME="{@label}"></A></xsl:if> <xsl:if test="count(id) != 0"><A NAME="{id}"></A></xsl:if> <xsl:apply-templates select="[not(self::caption)]"/> <xsl:if test="count(caption) != 0"> <BR/> <xsl:apply-templates select="caption"/> </xsl:if> </CENTER> </DIV> </html> </template> <template name="table" match="table"> <latex> \begin{table}<xsl:if test="@latex-placement">[<xsl:value-of select="@latex-placement"/>]</xsl:if> \centering <xsl:apply-templates select="[not(self::caption)]"/> <xsl:if test="count(caption) != 0"> \caption{<xsl:apply-templates select="caption"/>} <xsl:if test="@label">\label{<xsl:value-of select="@label"/>}</xsl:if> </xsl:if> \end{table} </latex> <html> <DIV CLASS="table"> <CENTER> <xsl:if test="@label"><A NAME="{@label}"></A></xsl:if> <xsl:apply-templates select="[not(self::caption)]"/> <xsl:if test="count(caption) != 0"> <BR/> <xsl:apply-templates select="caption"/> </xsl:if> </CENTER> </DIV> </html> </template> <template name="figure-caption" match="figure/caption"> <latex><xsl:apply-templates/></latex> <html> <STRONG> <xsl:text>Figure </xsl:text> <xsl:choose> <xsl:when test="$showanswers='yes'"> <xsl:number count="figure" level="any" format="1"/> </xsl:when> <xsl:otherwise> <xsl:number count="figure[not(ancestor::answer) and not(ancestor::omit) and not(ancestor::comment)]" level="any" format="1"/> </xsl:otherwise> </xsl:choose> <xsl:text>. </xsl:text> </STRONG> <xsl:apply-templates/> </html> </template> <template name="table-caption" match="table/caption"> <latex><xsl:apply-templates/></latex> <html> <STRONG> <xsl:text>Table </xsl:text> <xsl:choose> <xsl:when test="$showanswers='yes'"> <xsl:number count="table" level="any" format="1"/> </xsl:when> <xsl:otherwise> <xsl:number count="table[not(ancestor::answer) and not(ancestor::omit) and not(ancestor::comment)]" level="any" format="1"/> </xsl:otherwise> </xsl:choose> <xsl:text>. </xsl:text> </STRONG> <xsl:apply-templates/> </html> </template> <!-- Images. Includes a scaling factor for LaTeX. To do: alternatively, allow defining the scaling factor by specifying what proportion of the page width the image should occupy (a la LaTeX [width] parameter). How about a <latex-attributes> element that can be used to specify \includegraphics arguments? <width keepaspectratio="yes">0.5\columnwidth</width> <height>2cm</height> <scale>0.5</scale> etc. To do: if no description is given, use the basename as the content of the ALT element. Ideally, I think we should be able to define two image formats (PDF, EPS, PNG, ...) when marking up an image: one for LaTeX output, another for HTML. Mind you, if the generation of the various formats from a single master is handled outside of the XSLT processing...? --> <!-- LaTeX images are always handled the same way regardless. --> <template match="image" mode="latex"> <latex> <xsl:text>\includegraphics</xsl:text> <xsl:if test="count(latex-scaling) != 0"> <xsl:text>[scale=</xsl:text> <xsl:value-of select="latex-scaling"/> <xsl:text>]</xsl:text> </xsl:if> <!-- Adding general-purpose latex pass-through arguments for \includegraphics; this should eventually subsume the "scale"-only handler above. --> <!-- If providing multiple arguments, these should be comma-separated in the source XML, but no not need the enclosing square brackets. --> <xsl:if test="@latex-options"> <xsl:text>[</xsl:text> <xsl:value-of select="@latex-options"/> <xsl:text>]</xsl:text> </xsl:if> <!-- Use whatever standard image folder is appropriate for the context. --> <xsl:text>{</xsl:text> <xsl:choose> <!-- Could possibly change this to test="/document/@class = 'tutorial'" or similar? --> <!-- Sounds nicer...I think ideally the XSL processor would automatically figure out the path to the graphics based on the path to the source XML file. Can this be done? --> <xsl:when test="name(/child::node()[1])='tutorial' or /document/@class = 'tutorial'"> <xsl:text>\tutroot/</xsl:text> <!-- Note: support for format-number() is poor/nonexistent in Xalan, unless you build it (and Xerces) with the ICU package. Which you can't do using Cygwin. :^( --> <!-- Xalan also seems to require numbers to be written with a decimal point, otherwise it treats them as text. --> <xsl:value-of select="format-number(/document/@sequence-number, '00')"/><xsl:text>-</xsl:text><xsl:value-of select="/document/@title-code"/> <xsl:text>/Graphics</xsl:text> </xsl:when> <xsl:when test="name(/child::node()[1])='laboratory' or /document/@class = 'laboratory'"> <xsl:text>\labroot/</xsl:text> <xsl:value-of select="format-number(/document/@sequence-number, '00')"/><xsl:text>-</xsl:text><xsl:value-of select="/document/@title-code"/><xsl:text>/Graphics</xsl:text> </xsl:when> <!-- Allow the author to specify a non-standard image location on the fly. --> <xsl:when test="count(location) != 0"> <xsl:value-of select="location"/> </xsl:when> <!-- new style in progress... --> <xsl:otherwise> <xsl:text>images</xsl:text> </xsl:otherwise> </xsl:choose> <xsl:text>/</xsl:text> <!-- need to phase out "basename" as an element and swith to using an attribute --> <xsl:if test="count(basename) != 0"> <xsl:value-of select="basename"/> </xsl:if> <xsl:if test="@basename"> <xsl:value-of select="@basename"/> </xsl:if> <xsl:text>.</xsl:text> <xsl:choose> <xsl:when test="count(format) != 0"> <xsl:value-of select="format"/> </xsl:when> <xsl:otherwise> <xsl:value-of select="$image-format"/> </xsl:otherwise> </xsl:choose> <xsl:text>}</xsl:text> </latex> </template> <template match="image[count(provide-large-version) = 0]"> <latex><xsl:apply-templates select="." mode="latex"/></latex> <html> <IMG BORDER="0"> <xsl:attribute name="SRC"> <xsl:choose> <xsl:when test="(name(/child::node()[1])='tutorial') or (name(/child::node()[1])='laboratory') or /document/@class = 'tutorial' or /document/@class = 'laboratory' "> <xsl:text>Graphics/</xsl:text> <xsl:value-of select="basename\|@basename"/> <xsl:text>-96dpi</xsl:text> </xsl:when> <!-- Allow the author to specify a non-standard image location on the fly. --> <xsl:when test="count(location) != 0"> <xsl:value-of select="location"/> <xsl:text>/</xsl:text> <xsl:value-of select="basename\|@basename"/> </xsl:when> <xsl:otherwise> <xsl:text>images/</xsl:text> <xsl:value-of select="basename\|@basename"/> </xsl:otherwise> </xsl:choose> <xsl:text>.</xsl:text> <xsl:choose> <!-- CME: oops, I'd originally used the "format" tag to identify the format used in the LaTeX version, not the HTML! --> <xsl:when test="count(format) != 0"> <xsl:value-of select="format"/> </xsl:when> <xsl:otherwise> <xsl:text>png</xsl:text> </xsl:otherwise> </xsl:choose> </xsl:attribute> <xsl:attribute name="ALT"><xsl:apply-templates select="description"/></xsl:attribute> </IMG> </html> </template> <template match="image[count(provide-large-version) != 0]"> <latex><xsl:apply-templates select="." mode="latex"/></latex> <html> <A> <xsl:attribute name="HREF"> <!-- This first bit needs to be updated to match the rest, particularly with regards to non-standard image directories. --> <xsl:text>images/</xsl:text> <xsl:value-of select="basename\|@basename"/> <xsl:text>-zoom.</xsl:text> <xsl:choose> <xsl:when test="count(format) != 0"> <xsl:value-of select="format"/> </xsl:when> <xsl:otherwise> <xsl:text>png</xsl:text> </xsl:otherwise> </xsl:choose> </xsl:attribute> <IMG BORDER="0"> <xsl:attribute name="SRC"> <xsl:choose> <xsl:when test="(name(/child::node()[1])='tutorial') or (name(/child::node()[1])='laboratory') or /document/@class = 'tutorial' or /document/@class = 'laboratory' "> <xsl:text>Graphics/</xsl:text> <xsl:value-of select="basename\|@basename"/> <xsl:text>-96dpi</xsl:text> </xsl:when> <!-- Allow the author to specify a non-standard image location on the fly. --> <xsl:when test="count(location) != 0"> <xsl:value-of select="location"/> <xsl:text>/</xsl:text> <xsl:value-of select="basename\|@basename"/> </xsl:when> <xsl:otherwise> <xsl:text>images/</xsl:text> <xsl:value-of select="basename\|@basename"/> </xsl:otherwise> </xsl:choose> <xsl:text>.</xsl:text> <xsl:choose> <!-- CME: oops, I'd originally used the "format" tag to identify the format used in the LaTeX version, not the HTML! --> <xsl:when test="count(format) != 0"> <xsl:value-of select="format"/> </xsl:when> <xsl:otherwise> <xsl:text>png</xsl:text> </xsl:otherwise> </xsl:choose> </xsl:attribute> <xsl:attribute name="ALT"> <xsl:apply-templates select="description"/> </xsl:attribute> </IMG> <BR CLEAR="right"/> <xsl:text>(Larger version)</xsl:text> </A> </html> </template> <!-- Include another XML document into the current one. Including LaTeX should be done using <latex-input>. Nothing for HTML includes at present, although this may not actually be necessary anyway given that HTML doesn't natively support this in the first place. You're probably better off just generating a separate document and linking to it. It's difficult to produce HTML fragments because the XSLT processor seems to always generate a DOCTYPE when producing HTML, whether you want it or not. Maybe you can turn this off? @file: Name of file to include. [required] --> <template name="include-xml" match="include-document"> <common> <xsl:apply-templates select="document(@file)"/> </common> </template> <!-- Environment setup. This enables you to define environment settings (e.g., required LaTeX packages, etc.). We normally explicitly call the sub-elements within this, so this template is empty to prevent unwanted stuff accidentally being included in the output. --> <template name="environment" match="environment"/> <!-- Load a LaTeX package. @options: Any arguments to the package. [optional] --> <template name="latex-package" match="latex-packages/package"> <latex>\usepackage<xsl:if test="@options">[<xsl:value-of select="@options"/>]</xsl:if>{<xsl:value-of select="."/>}</latex> </template> <!-- Execute a preamble LaTeX command. Use to set up things like counters, fonts, hyperref options, etc. --> <template name="latex-command" match="latex-commands/command"> <latex><xsl:value-of select="."/></latex> </template> <!-- Hmm, the following may be more complex than I thought... External environment files sort of stuff it up. Perhaps LaTeX document class stuff should be in attributes of the document element? --> <!-- Specify LaTeX document class and options. The master stylesheet specifies \documentclass[a4paper,12pt]{article}. Anything you specify here will override that completely, so be sure to set a4paper and 12pt if that's what you want. @options: The required document class options. [optional] --> <template name="latex-documentclass" match="latex-documentclass\|documentclass"> <latex>\documentclass{<xsl:value-of select="."/>}</latex> </template> <template name="latex-documentclass-options" match="latex-documentclass[@options]\|documentclass[@options]"> <latex>\documentclass[<xsl:value-of select="@options"/>]{<xsl:value-of select="."/>}</latex> </template> <!-- Specify additional LaTeX document class options (i.e., in addition to the defaults). These should be a comma-separated list of the required options. These will be appended to the standard defaults (a4paper, 12pt). --> <template name="latex-document-options" match="latex-document-options"> <latex><xsl:apply-templates/></latex> </template> <!-- Sometimes we might need to embed raw code to handle something tricky. --> <template name="raw-latex" match="raw-code[@format = 'latex']\|raw-latex"> <latex><xsl:apply-templates/></latex> </template> <template name="raw-html" match="raw-code[@format = 'html']\|raw-html"> <html><xsl:copy-of select=""/></html> </template> <!-- Generate a LaTeX \input{} macro. --> <template name="latex-input" match="latex-input"> <latex>\input{<xsl:value-of select="."/>}</latex> </template> <!-- Conditional processing depending on the format. It may appear redundant to have two templates, but this is the only way to ensure that the LaTeX template is empty in the HTML style sheet, and vice versa. @format: the format under which this XML is to be processed. [required] --> <template name="process-when-latex" match="process-when[@format = 'latex']"> <latex><xsl:apply-templates/></latex> </template> <template name="process-when-html" match="process-when[@format = 'html']"> <html><xsl:apply-templates/></html> </template> <!-- Basic maths stuff. Anything more complicated is... complicated. We should probably be using MathML, but we still have to mangle it into HTML regardless. A <math> inside a <paragraph> is assumed to be inline, while a <math> on its own is assumed to be displayed in its own paragraph. --> <template name="math-inline" match="paragraph//math\|para//math\|p//math\|item//math"> <latex>\(<xsl:apply-templates/>\)</latex> <html><xsl:apply-templates/></html> </template> <template name="math-display" match="math"> <latex>\[<xsl:apply-templates/>\]</latex> <html><P ALIGN="center"><xsl:apply-templates/></P></html> </template> <!-- Equation arrays --> <template name="equation-array" match="equation-array"> <latex> <xsl:text>\begin{eqnarray} </xsl:text> <xsl:apply-templates/> <xsl:text>\end{eqnarray}</xsl:text> </latex> <html> <TABLE CLASS="equation" BORDER="0" ALIGN="CENTER"><xsl:apply-templates/></TABLE> </html> </template> <!-- Hmm, LaTeX uses "&" as separators: how do we know if there's another cell coming? Ah, but the LaTeX eqnarray can have no more than three columns, so there's no need to generalise. --> <template match="equation-array/row"> <latex> <xsl:apply-templates select="left"/><xsl:text disable-output-escaping="yes"> & </xsl:text><xsl:apply-templates select="middle"/><xsl:text disable-output-escaping="yes"> & </xsl:text><xsl:apply-templates select="right"/><xsl:text> \\ \\ </xsl:text> </latex> <html> <TR><TD ALIGN="RIGHT"><xsl:apply-templates select="left"/></TD><TD ALIGN="CENTER"><xsl:apply-templates select="middle"/></TD><TD ALIGN="LEFT"><xsl:apply-templates select="right"/></TD></TR> </html> </template> <!-- Roman (upright) text inside math environments. \mathrm sounds like it's probably more correct, but doesn't retain spaces (which \textup does). --> <template name="math-text" match="text"> <latex>\textup{<xsl:apply-templates/>}</latex> <html><xsl:apply-templates/></html> </template> <!-- Digit grouping separator character for large numbers. SI conventions say this should be a space (but we could make it a comma if desired). --> <template name="digit-group-separator" match="digit-group-separator\|digitsep"> <common> <xsl:call-template name="non-breaking-space"/> </common> </template> <!-- Mathematical super- and subscript. --> <template name="superscript-math" match="math//superscript"> <latex>\ensuremath{^{<xsl:apply-templates/>}}</latex> <html><SUP><xsl:apply-templates/></SUP></html> </template> <template name="subscript-math" match="math//subscript"> <latex>\ensuremath{_{<xsl:apply-templates/>}}</latex> <html><SUB><xsl:apply-templates/></SUB></html> </template> <!-- Basic mathematical operators. We get around the problem of math vs. non-math mode operators in LaTeX by liberally sprinkling \ensuremath around. If we're not in math mode, it enables it, and if we're already in math mode, it ignores it. This means we don't need identical templates for math and non-math modes. Yay! Do we really need <left-parenthesis> and <right-parenthesis>? Maybe we're getting a little carried away with these :) --> <template name="plus-operator" match="plus"> <common>+</common> </template> <template name="minus-operator" match="minus"> <latex>\ensuremath{-}</latex> <html>-</html> </template> <template name="times-operator" match="times"> <latex>\ensuremath{\times}</latex> <html><xsl:text disable-output-escaping="yes"> &#215; </xsl:text></html> </template> <template name="divide-operator" match="divide"> <common>/</common> </template> <template name="equals-operator" match="equals"> <!-- Need spaces for HTML as they seem to get munched otherwise. --> <common> = </common> </template> <template name="greater-than-operator" match="greater-than\|gt"> <!-- Need spaces for HTML as they seem to get munched otherwise. --> <latex> \ensuremath{>} </latex> <html><xsl:text disable-output-escaping="yes">&#62;</xsl:text></html> </template> <template name="greater-equals-operator" match="greater-equals\|ge"> <!-- Need spaces for HTML as they seem to get munched otherwise. --> <latex> \ensuremath{\geq} </latex> <html><xsl:text disable-output-escaping="yes">&#8805;</xsl:text></html> </template> <template name="less-than-operator" match="less-than\|lt"> <!-- Need spaces for HTML as they seem to get munched otherwise. --> <latex> \ensuremath{<} </latex> <html><xsl:text disable-output-escaping="yes">&#60;</xsl:text></html> </template> <template name="less-equals-operator" match="less-equals\|le"> <!-- Need spaces for HTML as they seem to get munched otherwise. --> <latex> \ensuremath{\leq} </latex> <html><xsl:text disable-output-escaping="yes">&#8804;</xsl:text></html> </template> <template name="approximately-equals-operator" match="approximately-equals\|approximately-equal-to\|approx"> <latex>\ensuremath{\approx}</latex> <html><xsl:text disable-output-escaping="yes">&#8776;</xsl:text></html> </template> <template name="right-arrow" match="right-arrow\|rightarrow\|implies\|rarr\|rarrow"> <latex> <xsl:text> \ensuremath{\</xsl:text> <xsl:choose> <xsl:when test="@weight='double'">R</xsl:when> <xsl:otherwise>r</xsl:otherwise> </xsl:choose> <xsl:text>ightarrow} </xsl:text> </latex> <html> <xsl:choose> <xsl:when test="@weight='double'"> <xsl:text disable-output-escaping="yes">&#8658;</xsl:text> </xsl:when> <xsl:otherwise> <xsl:text disable-output-escaping="yes">&#8594;</xsl:text> </xsl:otherwise> </xsl:choose> </html> </template> <template name="left-arrow" match="left-arrow\|leftarrow\|larr\|larrow"> <latex> <xsl:text> \ensuremath{\</xsl:text> <xsl:choose> <xsl:when test="@weight='double'">L</xsl:when> <xsl:otherwise>l</xsl:otherwise> </xsl:choose> <xsl:text>eftarrow} </xsl:text> </latex> <html> <xsl:choose> <xsl:when test="@weight='double'"> <xsl:text disable-output-escaping="yes">&#8656;</xsl:text> </xsl:when> <xsl:otherwise> <xsl:text disable-output-escaping="yes">&#8592;</xsl:text> </xsl:otherwise> </xsl:choose> </html> </template> <!-- The equivalent of LaTeX's "log-like functions". @name: The name of the function. We assume the names used by LaTeX here, as they work out correct anyway. There's actually nothing to stop you using any name you like, except that it'll probably die horribly in LaTeX :) [required] --> <template name="log-like-function" match="function"> <latex>\ensuremath{\<xsl:value-of select="@name"/>}</latex> <html><xsl:value-of select="@name"/></html> </template> <!-- Any mathematical variable names. --> <template name="math-variable" match="variable"> <latex>\ensuremath{<xsl:apply-templates/>}</latex> <html><I><xsl:apply-templates/></I></html> </template> <!-- A displayed fraction. Is there a nicer way of doing this in HTML? --> <template name="math-fraction" match="fraction"> <latex>\ensuremath{\frac{<xsl:apply-templates select="numerator"/>}{<xsl:apply-templates select="denominator"/>}}</latex> <html> <SUP><xsl:apply-templates select="numerator"/></SUP> <xsl:text disable-output-escaping="yes">&#8260;</xsl:text> <SUB><xsl:apply-templates select="denominator"/></SUB> </html> </template> <!-- Format a University paper code. These normally appear in the form "SPOD 123", i.e., a space between the subject code and the paper number. --> <template name="paper" match="paper"> <common> <xsl:apply-templates select="subject-code"/> <xsl:text> </xsl:text> <xsl:apply-templates select="paper-number"/> </common> </template> <template name="subject-code" match="paper/subject-code"> <common><xsl:apply-templates/></common> </template> <template name="paper-number" match="paper/paper-number"> <common><xsl:apply-templates/></common> </template> <!-- Create a layout of multiple columns across the page. By default, columns are of equal width, but may be varied on a column-by-column basis. Each column is totally independent of the others, i.e., you can't have text automatically flowing from one column to the next (yet). @vspace: The amount of vertical space to put around the multi-column elements. [small, medium, big, LaTeX length, NONE] @align: Overall alignment of the columns (only relevant if the total width of the columns is less than the page width). [LEFT, center, right] @width: Total width of the column set, expressed as a fraction of the usable page width between 0 and 1 (this will be multiplied by 100 for HTML). Individual column widths are then expressed as a fraction of this total width. [default is 1] --> <template name="multi-column" match="multi-column"> <latex> <xsl:variable name="total-width"> <xsl:number value="1"/> <xsl:if test="@width"><xsl:value-of select="@width"/></xsl:if> </xsl:variable> <xsl:choose> <xsl:when test="@vspace = 'small'">\smallskip</xsl:when> <xsl:when test="@vspace = 'medium'">\medskip</xsl:when> <xsl:when test="@vspace = 'big'">\bigskip</xsl:when> <xsl:when test="@vspace">\vskip<xsl:value-of select="@vspace"/></xsl:when> </xsl:choose> \noindent <xsl:if test="@align"> <xsl:text>\begin{</xsl:text> <xsl:choose> <xsl:when test="(@align = 'left') or (@align = 'right')"> <xsl:text>flush</xsl:text><xsl:value-of select="@align"/> </xsl:when> <xsl:when test="@align = 'center'"> <xsl:text>center</xsl:text> </xsl:when> </xsl:choose> <xsl:text>}</xsl:text> </xsl:if> <xsl:apply-templates> <xsl:with-param name="default-width"> <xsl:number value="format-number($total-width div count(column),'0.00')"/> </xsl:with-param> </xsl:apply-templates> <xsl:if test="@align"> <xsl:text>\end{</xsl:text> <xsl:choose> <xsl:when test="(@align = 'left') or (@align = 'right')"> <xsl:text>flush</xsl:text><xsl:value-of select="@align"/> </xsl:when> <xsl:when test="@align = 'center'"> <xsl:text>center</xsl:text> </xsl:when> </xsl:choose> <xsl:text>}</xsl:text> </xsl:if> <xsl:choose> <xsl:when test="@vspace = 'small'">\smallskip</xsl:when> <xsl:when test="@vspace = 'medium'">\medskip</xsl:when> <xsl:when test="@vspace = 'big'">\bigskip</xsl:when> <xsl:when test="@vspace">\vskip<xsl:value-of select="@vspace"/></xsl:when> </xsl:choose> </latex> <html> <xsl:variable name="total-width"> <xsl:number value="100"/> <xsl:if test="@width"><xsl:value-of select="@width * 100"/></xsl:if> </xsl:variable> <xsl:if test="@vspace"><BR/></xsl:if> <TABLE BORDER="0" WIDTH="{$total-width}%"> <xsl:if test="@align"> <xsl:attribute name="ALIGN"> <xsl:value-of select="@align"/> </xsl:attribute> </xsl:if> <TR> <xsl:apply-templates> <xsl:with-param name="default-width"> <xsl:number value="round($total-width div count(column))"/> </xsl:with-param> </xsl:apply-templates> </TR> </TABLE> <xsl:if test="@vspace"><BR/></xsl:if> </html> </template> <!-- A column within a multi-column element. $default-width: The default width of the column, expressed as a fraction of the total column set width. This is calculated by the <multi-column> template and should be 1/n of the column set width, where n is the number of columns. @width: The width of this particular column (overrides the default). This should be expressed as a fraction between 0 and 1 (which is then multipled by 100 for HTML). Make sure that all widths add up! @align: How each individual column is to be aligned internally. --> <template name="multi-column-column" match="multi-column/column"> <latex> <xsl:param name="default-width">1</xsl:param> <xsl:text>\begin{minipage}{</xsl:text> <xsl:choose> <xsl:when test="@width"><xsl:value-of select="@width"/></xsl:when> <xsl:otherwise><xsl:value-of select="$default-width"/></xsl:otherwise> </xsl:choose> <xsl:text>\columnwidth}</xsl:text> <xsl:if test="@align"> <xsl:text>\begin{</xsl:text> <xsl:choose> <xsl:when test="(@align = 'left') or (@align = 'right')"> <xsl:text>flush</xsl:text><xsl:value-of select="@align"/> </xsl:when> <xsl:when test="@align = 'center'"> <xsl:text>center</xsl:text> </xsl:when> </xsl:choose> <xsl:text>}</xsl:text> </xsl:if> <xsl:apply-templates/> <xsl:if test="@align"> <xsl:text>\end{</xsl:text> <xsl:choose> <xsl:when test="(@align = 'left') or (@align = 'right')"> <xsl:text>flush</xsl:text><xsl:value-of select="@align"/> </xsl:when> <xsl:when test="@align = 'center'"> <xsl:text>center</xsl:text> </xsl:when> </xsl:choose> <xsl:text>}</xsl:text> </xsl:if> <xsl:text>\end{minipage}</xsl:text> </latex> <html> <xsl:param name="default-width">100</xsl:param> <TD> <xsl:attribute name="WIDTH"> <xsl:choose> <xsl:when test="@width"><xsl:value-of select="@width * 100"/></xsl:when> <xsl:otherwise><xsl:value-of select="$default-width"/></xsl:otherwise> </xsl:choose> <xsl:text>%</xsl:text> </xsl:attribute> <xsl:if test="@align"> <xsl:attribute name="ALIGN"> <xsl:value-of select="@align"/> </xsl:attribute> </xsl:if> <xsl:apply-templates/> </TD> </html> </template> <!-- Center stuff on the page. --> <template name="center" match="center\|centering"> <latex> \begin{center} <xsl:apply-templates/> \end{center} </latex> <html> <CENTER> <xsl:apply-templates/> </CENTER> </html> </template> </stylesheet> <?xml version="1.0"?> <!-- This will mostly be a list of element names to match, along with the corresponding HTML and LaTeX handling XSLT code. --> <stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" > <template name="PaperCode" match="PaperCode"> <latex><xsl:value-of select="$department"/>~<xsl:value-of select="$paper"/></latex> <html> <xsl:value-of select="$department"/> <xsl:text disable-output-escaping="yes">&nbsp;</xsl:text> <xsl:value-of select="$paper"/> </html> </template> <template name="OracleServer" match="OracleServer"> <latex>Oracle9\textit{i}</latex> <html>Oracle9<I>i</I></html> </template> <template name="Blackboard" match="Blackboard"> <common> <xsl:call-template name="hyperlink-internal"> <xsl:with-param name="url">http://blackboard.otago.ac.nz/</xsl:with-param> <xsl:with-param name="label">Blackboard</xsl:with-param> </xsl:call-template> </common> </template> <!-- Plain paragraph. @indent: Whether or not to indent this paragraph (probably only relevant in LaTeX). 'no' => don't indent. otherwise => apply standard paragraph formatting. [default] @align: How to align the paragraph. Note that these are potentially distinct from the default action, e.g., specifying align="left" will produce a flushleft environment in LaTeX, which is not the same effect as not specifying an alignment. 'left' => left alignment 'center' => centered alignment 'right' => right alignment --> <template name="paragraph" match="paragraph\|para\|p\|P"> <latex> <xsl:text> </xsl:text> <xsl:choose> <xsl:when test="(@align = 'left') or (@align = 'right')"> <xsl:text>\begin{flush</xsl:text> <xsl:value-of select="@align"/> <xsl:text>}</xsl:text> <xsl:apply-templates/> <xsl:text>\end{flush</xsl:text> <xsl:value-of select="@align"/> <xsl:text>}</xsl:text> </xsl:when> <xsl:when test="@align = 'center'"> <xsl:text>\begin{center}</xsl:text> <xsl:apply-templates/> <xsl:text>\end{center}</xsl:text> </xsl:when> <xsl:otherwise> <xsl:if test="@indent = 'no'">\noindent </xsl:if> <xsl:apply-templates/> </xsl:otherwise> </xsl:choose> <xsl:text> </xsl:text> </latex> <!-- HTML is weird about what things you cannot include inside paragraphs (e.g. lists of any kind). However, the end P tag is optional, so one option might simply be not to output it. --> <html> <P> <xsl:if test="@align"> <xsl:attribute name="ALIGN"> <xsl:value-of select="@align"/> </xsl:attribute> </xsl:if> <xsl:apply-templates/> </P> </html> </template> <!-- Special characters (should maybe all be named, in case they need to be called explicitly with xsl:call-template) --> <!-- I'd like to use the Unicode names for these; will look them up some time! --> <template name="newline" match="newline\|line-break\|br"> <latex><xsl:text> \\ </xsl:text></latex> <html><BR/></html> </template> <!-- Whereas newline\|line-break is for line breaks intended to be outputted in the final document, this is for additional linebreaks in the generated latex or HTML source (for stuff like avoiding "\end{verbatim}\item" all on one line). --> <template name="newline-internal" match="newline-internal"> <latex><xsl:text> </xsl:text></latex> <html><xsl:text> </xsl:text></html> </template> <template name="page-break" match="page-break\|new-page\|newpage\|pagebreak"> <latex>\newpage</latex> </template> <template name="non-breaking-space" match="non-breaking-space\|nbsp"> <latex>~</latex> <html><xsl:text disable-output-escaping="yes">&nbsp;</xsl:text></html> </template> <!-- Technically we don't need to disable output escaping for all of these, but it's probably better to code them all consistently, rather than trying to figure out which ones do need it (e.g.,   for a non-breaking space) and which ones don't (e.g., &). --> <template name="ellipsis-sign" match="ellipsis-sign\|etc\|ellipsis\|dots"> <latex>{\ldots}</latex> <html><xsl:text disable-output-escaping="yes">&#8230;</xsl:text></html> </template> <!-- Misc typographic symbols --> <template name="endash" match="endash\|en-dash"> <latex>--</latex> <html><xsl:text disable-output-escaping="yes">&#8211;</xsl:text></html> </template> <template name="emdash" match="emdash\|em-dash"> <latex>---</latex> <html><xsl:text disable-output-escaping="yes">&#8212;</xsl:text></html> </template> <!-- Use this for literal underscores that appear outside code blocks. Such things cause LaTeX to wig out. --> <template name="underscore" match="underscore"> <latex>\_</latex> <html>_</html> </template> <template name="apostrophe" match="apostrophe"> <latex>'</latex> <html><xsl:text disable-output-escaping="yes">&#8217;</xsl:text></html> </template> <template name="dollar" match="dollar\|dollar-sign"> <latex>{\$}</latex> <html>$</html> </template> <template name="percent-sign" match="percent-sign\|percentage-sign\|percent"> <latex>{\%}</latex> <html>%</html> </template> <template name="ampersand" match="ampersand"> <latex>{\&}</latex> <html><xsl:text disable-output-escaping="yes">&amp;</xsl:text></html> </template> <template name="trademark-sign" match="trademark-sign\|trademark\|TM"> <latex>{\texttrademark}</latex> <html><xsl:text disable-output-escaping="yes">&#8482;</xsl:text></html> </template> <template name="copyright-sign" match="copyright-sign"> <latex>{\copyright}</latex> <html><xsl:text disable-output-escaping="yes">&#169;</xsl:text></html> </template> <template name="degree-sign" match="degree-sign\|degrees"> <latex>\ensuremath{^{\circ}}</latex> <html><xsl:text disable-output-escaping="yes">&#176;</xsl:text></html> </template> <template name="section-sign" match="section-sign"> <latex>{\S}</latex> <html><xsl:text disable-output-escaping="yes">&#167;</xsl:text></html> </template> <template name="paragraph-sign" match="paragraph-sign"> <latex>{\P}</latex> <html><xsl:text disable-output-escaping="yes">&#182;</xsl:text></html> </template> <!-- I think the pi symbol is only available in LaTeX in math mode, but if we're already in math mode, the extra $ signs will mess things up... --> <!-- Use \ensuremath to resolve the problem. --> <template name="pi" match="pi"> <latex>\ensuremath{\pi}</latex> <html><xsl:text disable-output-escaping="yes">&#960;</xsl:text></html> </template> <template name="LaTeX" match="LaTeX\|latex"> <latex>{\LaTeX}</latex> <html>L<SUP>A</SUP>T<SUB>E</SUB>X</html> </template> <!-- Note: no equivalent of \triangleright in HTML, use right arrow instead. --> <template name="menu-separator" match="menu-separator\|menusep\|menu/separator"> <latex> \ensuremath{\triangleright} </latex> <html><xsl:text disable-output-escaping="yes"> &#8594; </xsl:text></html> </template> <template name="menu-item" match="menu/item"> <latex>\textbf{<xsl:apply-templates/>}</latex> <html><B><xsl:apply-templates/></B></html> </template> <!-- Special styles --> <template name="emph" match="emph"> <latex>\emph{<xsl:apply-templates/>}</latex> <html><EM><xsl:apply-templates/></EM></html> </template> <template name="italic" match="italic"> <latex>\textit{<xsl:apply-templates/>}</latex> <html><I><xsl:apply-templates/></I></html> </template> <template name="strong" match="strong"> <latex>\textbf{<xsl:apply-templates/>}</latex> <html><STRONG><xsl:apply-templates/></STRONG></html> </template> <template name="bold" match="bold"> <latex>\textbf{<xsl:apply-templates/>}</latex> <html><B><xsl:apply-templates/></B></html> </template> <template name="term" match="term"> <latex>\term{<xsl:apply-templates/>}</latex> <html><I CLASS="term"><xsl:apply-templates/></I></html> </template> <template name="foreign" match="foreign"> <latex>\foreign{<xsl:apply-templates/>}</latex> <html><I CLASS="foreign"><xsl:apply-templates/></I></html> </template> <template name="code" match="code"> <!-- <latex>\code{<xsl:apply-templates/>}</latex> --> <!-- Using \verb is quite handy because things like underscores don't bother it. However, it seems it can't be used inside hyperlinks. Maybe create another template that just does a \texttt on the contents? --> <!-- OK, but then we need an <underscore> element to stop them from freaking LaTeX out. --> <latex>\verb+<xsl:apply-templates/>+</latex> <html><CODE><xsl:apply-templates/></CODE></html> </template> <template name="typewriter" match="typewriter\|monospace\|tt"> <latex>\texttt{<xsl:apply-templates/>}</latex> <html><CODE><xsl:apply-templates/></CODE></html> </template> <template name="sans-serif" match="sans-serif\|sans\|ss\|sf"> <latex>\textsf{<xsl:apply-templates/>}</latex> <html><FONT FACE="sans-serif"><xsl:apply-templates/></FONT></html> </template> <!-- Non-maths super- and subscript. --> <template name="superscript" match="superscript"> <latex>\ensuremath{^{\mathrm{<xsl:apply-templates/>}}}</latex> <html><SUP><xsl:apply-templates/></SUP></html> </template> <template name="subscript" match="subscript"> <latex>\ensuremath{_{\mathrm{<xsl:apply-templates/>}}}</latex> <html><SUB><xsl:apply-templates/></SUB></html> </template> <!-- Text that shouldn't be broken across a line (i.e., LaTeX \mbox). Only really relevant for LaTeX because we can't control this in HTML. --> <template name="no-break" match="no-break\|mbox"> <latex>\mbox{<xsl:apply-templates/>}</latex> <html><xsl:apply-templates/></html> </template> <!-- Skip a certain amount of space vertically. Probably more relevant to LaTeX than HTML. Is it even possible to vskip a set amount in HTML?? @size: the amount of space to skip. missing => \vskip\baselineskip [default] 'small' => \smallskip 'medium' => \medskip 'large' => \bigskip 'fill' => \vfill LaTeX length => \vskipxx --> <template name="vertical-skip" match="vertical-skip\|vskip"> <latex> <xsl:choose> <xsl:when test="not(@size)"> \vskip\baselineskip </xsl:when> <xsl:when test="@size='small'"> \smallskip </xsl:when> <xsl:when test="@size='medium'"> \medskip </xsl:when> <xsl:when test="@size='large'"> \bigskip </xsl:when> <xsl:when test="@size='fill'"> \vfill </xsl:when> <xsl:otherwise> \vskip<xsl:value-of select="@size"/> </xsl:otherwise> </xsl:choose> </latex> <!-- For the moment we'll just throw in a BR :) --> <html><BR/></html> </template> <!-- We can decide later whether to use plain verbatim or listings. --> <template name="code-block" match="code-block"> <latex> <xsl:call-template name="newline-internal"/> <!-- If the code-block specifies "allow-breaks='no'", wrap the verbatim inside a minipage to avoid page breaks within the code. --> <xsl:if test="@allow-breaks = 'no'"> <xsl:text>\vskip\baselineskip</xsl:text> <xsl:call-template name="newline-internal"/> <xsl:text>\begin{minipage}{\textwidth}</xsl:text> <xsl:call-template name="newline-internal"/> </xsl:if> <xsl:text>\begin{verbatim}</xsl:text> <xsl:apply-templates/> <xsl:text>\end{verbatim}</xsl:text> <xsl:call-template name="newline-internal"/> <xsl:if test="@allow-breaks = 'no'"> <xsl:text>\end{minipage}</xsl:text> <xsl:call-template name="newline-internal"/> <xsl:text>\vskip\baselineskip</xsl:text> <xsl:call-template name="newline-internal"/> </xsl:if> </latex> <html> <PRE CLASS="code"><xsl:apply-templates/></PRE> </html> </template> <!-- This is for stuff that should unequivocally be treated verbatim (e.g. problem code). I'm pretty sure that previously this was distinguished from "code-block" because it (code-block) used to use listings instead of verbatim. Now that they're both using verbatim there is probably no need for them both (but we might switch back to using listings for code-block). --> <template name="verbatim" match="verbatim"> <latex> <xsl:call-template name="newline-internal"/> <xsl:text>\begin{verbatim}</xsl:text> <xsl:apply-templates/> <xsl:text>\end{verbatim}</xsl:text> <xsl:call-template name="newline-internal"/> </latex> <html> <PRE><xsl:apply-templates/></PRE> </html> </template> <!-- Quoted text. Handles nested quotes correctly. @single: Whether to enclose the text in single or double quotes. 'yes' => single quotes (''). otherwise => double quotes (""). [default] --> <template name="single-quote" match="quote[@single='yes']\|q[@single='yes']"> <latex>`<xsl:apply-templates/>'</latex> <html> <xsl:text disable-output-escaping="yes">&#8216;</xsl:text> <xsl:apply-templates/> <xsl:text disable-output-escaping="yes">&#8217;</xsl:text> </html> </template> <template name="double-quote" match="quote\|qq"> <latex>``<xsl:apply-templates/>''</latex> <html> <xsl:text disable-output-escaping="yes">&#8220;</xsl:text> <xsl:apply-templates/> <xsl:text disable-output-escaping="yes">&#8221;</xsl:text> </html> </template> <!-- With nested quotes, we need to figure out what depth of nesting we're at, then call the appropriate template depending on the initial quoting style (single or double). --> <template name="nested-double-quote" match="quote//quote"> <common> <xsl:choose> <xsl:when test="(count(ancestor::quote) mod 2) = 0"> <xsl:call-template name="double-quote"/> </xsl:when> <xsl:otherwise> <xsl:call-template name="single-quote"/> </xsl:otherwise> </xsl:choose> </common> </template> <template name="nested-single-quote" match="quote[@single='yes']//quote" priority="2"> <common> <xsl:choose> <xsl:when test="(count(ancestor::quote) mod 2) = 0"> <xsl:call-template name="single-quote"/> </xsl:when> <xsl:otherwise> <xsl:call-template name="double-quote"/> </xsl:otherwise> </xsl:choose> </common> </template> <!-- Environments (in the LaTeX terminology): enumerated, ordered, and numbered lists. --> <!-- Unordered lists --> <template name="itemised-list" match="itemised-list\|itemize\|unordered-list\|bulleted-list\|bullet-list\|bullet-points\|UL\|ul"> <latex> \begin{itemize} <xsl:apply-templates/> \end{itemize} </latex> <html> <UL> <xsl:apply-templates/> </UL> </html> </template> <!-- Ordered lists --> <template name="enumerated-list" match="enumerated-list\|enumerate\|ordered-list\|numbered-list\|question-list\|OL\|ol"> <latex> \begin{enumerate} <xsl:apply-templates/> \end{enumerate} </latex> <html> <OL> <xsl:apply-templates/> </OL> </html> </template> <!-- Definition or description lists. --> <template name="definition-list" match="definition-list\|description-list\|DL\|dl"> <latex> \begin{description} <xsl:apply-templates mode="definition-list"/> \end{description} </latex> <html> <!-- Hmm, <DL>s in HTML tend to come out with the spacing a bit wrong (or maybe it's just my browser?). Might using a table be better? Messy if the keyword is long, though, and you don't get a proper hanging indent... Maybe this is something that could be handled in CSS instead. --> <DL> <xsl:apply-templates mode="definition-list"/> </DL> <!-- <TABLE BORDER="0" CELLPADDING="10"> --> <!-- <xsl:apply-templates/> --> <!-- </TABLE> --> </html> </template> <!-- List elements --> <template name="list-item" match="item"> <latex><xsl:text>\item </xsl:text><xsl:apply-templates/></latex> <html> <xsl:choose> <xsl:when test="count(paragraph\|para\|p) != 0"> <LI><xsl:apply-templates/></LI> </xsl:when> <xsl:otherwise> <LI><P><xsl:apply-templates/></P></LI> </xsl:otherwise> </xsl:choose> </html> </template> <template name="definition-item" match="item" mode="definition-list"> <latex> <xsl:text>\item[</xsl:text> <xsl:apply-templates select="keyword\|topic\|DT\|dt"/> <xsl:text>] </xsl:text> <xsl:apply-templates select="definition\|description\|discourse\|DD\|dd"/> </latex> <html> <DT><P><xsl:apply-templates select="keyword\|topic\|DT\|dt"/></P></DT> <DD><xsl:apply-templates select="definition\|description\|discourse\|DD\|dd"/></DD> <!-- <TR VALIGN="TOP"> --> <!-- <TD><P><xsl:apply-templates select="keyword"/></P></TD> --> <!-- <TD><xsl:apply-templates select="definition\|description\|discourse"/></TD> --> <!-- </TR> --> </html> </template> <template name="keyword" match="keyword\|topic\|DT\|dt"> <latex><xsl:apply-templates/></latex> <html><STRONG><xsl:apply-templates/></STRONG></html> </template> <!-- Need to provide some context here as, e.g., <description> is also used within <image>. --> <template name="definition" match="item/definition\|item/description\|item/discourse\|item/DD\|item/dd"> <latex><xsl:apply-templates/></latex> <html> <xsl:choose> <xsl:when test="count(paragraph\|para\|p) != 0"> <xsl:apply-templates/> </xsl:when> <xsl:otherwise> <P><xsl:apply-templates/></P> </xsl:otherwise> </xsl:choose> </html> </template> <!-- Sample answers, which may optionally be excluded from the output. --> <template name="answer" match="answer"> <latex> <!-- It's nice to weed out the sample answer markup at the XSLT processing stage to make LaTeX run faster. Note that \showanswers still needs to be called so that LaTeX can format chapter headings like "Answers for ..." --> <xsl:if test="$showanswers='yes'"> \begin{answer} <xsl:apply-templates/> \end{answer} </xsl:if> </latex> <html> <xsl:if test="$showanswers='yes'"> <DIV CLASS="answer"> <xsl:apply-templates/> </DIV> </xsl:if> </html> </template> <!-- Sections, subsections, subsubsections, ... @label: A label that can be used for cross referencing. Any value can be used, as long as it's a legal identifier in both LaTeX and HTML. --> <template name="section" match="section"> <latex> <xsl:apply-templates> <xsl:with-param name="label"> <xsl:value-of select="@label"/> <xsl:if test="not(@label)">THERE_IS_NO_LABEL</xsl:if> </xsl:with-param> </xsl:apply-templates> </latex> <html> <xsl:if test="@label"><A NAME="{@label}"></A></xsl:if> <xsl:apply-templates/> </html> </template> <!-- Footnotes. --> <template name="footnote" match="footnote"> <latex>\footnote{<xsl:apply-templates/>}</latex> <html> <A> <xsl:attribute name="NAME"> <xsl:text>footnote-</xsl:text> <xsl:number level="any" count="footnote"/> <xsl:text>-source</xsl:text> </xsl:attribute> <xsl:attribute name="HREF"> <xsl:text>#footnote-</xsl:text> <xsl:number level="any" count="footnote"/> <xsl:text>-target</xsl:text> </xsl:attribute> <xsl:text>[</xsl:text> <xsl:number level="any" count="footnote"/> <xsl:text>]</xsl:text> </A> </html> </template> <!-- This is only required for HTML, as LaTeX does it all for you. --> <template name="footnote-list" match="footnote" mode="list"> <html> <P> <A> <xsl:attribute name="NAME"> <xsl:text>footnote-</xsl:text> <xsl:number level="any" count="footnote"/> <xsl:text>-target</xsl:text> </xsl:attribute> <xsl:text>[</xsl:text> <xsl:number level="any" count="footnote"/> <xsl:text>]</xsl:text> </A> <xsl:text> </xsl:text> <xsl:apply-templates/> <xsl:text> </xsl:text> <!-- Provide a back link to the original footnote marker. --> <A> <xsl:attribute name="HREF"> <xsl:text>#footnote-</xsl:text> <xsl:number level="any" count="footnote"/> <xsl:text>-source</xsl:text> </xsl:attribute> <xsl:text>[Back]</xsl:text> </A> </P> </html> </template> <!-- Document preamble stuff: title, author, date. --> <template name="preamble-title" match="document/title" mode="preamble"> <latex>\title{<xsl:apply-templates/>}</latex> <html> <xsl:apply-templates/> </html> </template> <template name="preamble-author" match="document/author" mode="preamble"> <latex>\author{<xsl:apply-templates/>}</latex> </template> <template name="preamble-date" match="document/date" mode="preamble"> <latex>\date{<xsl:apply-templates/>}</latex> </template> <template name="document-title" match="document/title"> <!-- Need to do something sensible for LaTeX here. --> <latex> <!-- Under the LaTeX framework, the rest of the chapter title text is generated by LaTeX macros, so this is pretty simple. --> <!-- I think this is broken? --> <xsl:if test="/document/@standalone = 'yes'"><xsl:apply-templates/></xsl:if> </latex> <html> <xsl:choose> <xsl:when test="/document/@class = 'tutorial'"> <H1><xsl:call-template name="PaperCode"/> Tutorial <xsl:value-of select="/document/@sequence-number"/><xsl:if test="$showanswers='yes'"> Sample Answers</xsl:if>: <BR/><xsl:apply-templates/></H1> </xsl:when> <xsl:when test="/document/@class = 'laboratory'"> <H1><xsl:call-template name="PaperCode"/> Lab <xsl:value-of select="/document/@sequence-number"/><xsl:if test="$showanswers='yes'"> Sample Answers</xsl:if>: <BR/><xsl:apply-templates/></H1> </xsl:when> <xsl:otherwise> <H1><xsl:apply-templates/></H1> </xsl:otherwise> </xsl:choose> </html> </template> <!-- New template for tutorials and labs, which are essentially chapters when included in a course book, but are marked up as documents in themselves. --> <template name="chapter-title" match="document/title" mode="chapter"> <latex> <xsl:apply-templates/> </latex> <html> <xsl:choose> <xsl:when test="/document/@class = 'tutorial'"> <H1><xsl:call-template name="PaperCode"/> Tutorial <xsl:value-of select="/document/@sequence-number"/><xsl:if test="$showanswers='yes'"> Sample Answers</xsl:if>: <BR/><xsl:apply-templates/></H1> </xsl:when> <xsl:when test="/document/@class = 'laboratory'"> <H1><xsl:call-template name="PaperCode"/> Lab <xsl:value-of select="/document/@sequence-number"/><xsl:if test="$showanswers='yes'"> Sample Answers</xsl:if>: <BR/><xsl:apply-templates/></H1> </xsl:when> <xsl:otherwise> <H1><xsl:apply-templates/></H1> </xsl:otherwise> </xsl:choose> </html> </template> <template name="document-author" match="document/author"/> <template name="document-date" match="document/date"/> <!-- Generate some number of "sub"s so we can produce, e.g., "subsubsection" for LaTeX. $depth: the number of repetitions (0 <= $depth <= 2, but there's no need to do bounds checking at the upper end, because that's already dealt with in the "section-title" template below). --> <template name="generate-subs"> <latex> <xsl:param name="depth">1</xsl:param> <xsl:if test="$depth > 1"> <xsl:text>sub</xsl:text> <xsl:call-template name="generate-subs"> <xsl:with-param name="depth"><xsl:value-of select="$depth - 1"/></xsl:with-param> </xsl:call-template> </xsl:if> </latex> </template> <!-- Generate section title with nested numbering, e.g., 1.1.3. --> <template name="section-title" match="section/title"> <latex> <xsl:param name="label"/> <xsl:text>\</xsl:text> <!-- Generate the correct number of "sub"s for LaTeX. --> <xsl:call-template name="generate-subs"> <xsl:with-param name="depth"> <xsl:number value="count(ancestor::section)"/> <xsl:if test="count(ancestor::section) > 3">3</xsl:if> </xsl:with-param> </xsl:call-template> <xsl:text>section{</xsl:text> <xsl:apply-templates/><xsl:text>}</xsl:text> <xsl:if test="$label != 'THERE_IS_NO_LABEL'"> \label{<xsl:value-of select="$label"/>} </xsl:if> </latex> <html> <!-- The depth is used in a couple of places, so we pre-calculate it. --> <xsl:variable name="depth"> <xsl:number value="1 + count(ancestor::section)"/> <xsl:if test="1 + count(ancestor::section) > 6">6</xsl:if> </xsl:variable> <xsl:text disable-output-escaping="yes"><H</xsl:text><xsl:number value="$depth"/><xsl:text disable-output-escaping="yes">></xsl:text> <xsl:number count="section" level="multiple" format="1.1.1.1.1.1"/> <xsl:text> </xsl:text> <xsl:apply-templates/> <xsl:text disable-output-escaping="yes"></H</xsl:text><xsl:number value="$depth"/><xsl:text disable-output-escaping="yes">></xsl:text> </html> </template> <!-- A quotation. @align: The alignment of the quotation paragraph. 'left' [default] 'center' 'right' --> <template name="quotation" match="quotation"> <latex> <xsl:choose> <xsl:when test="(@align = 'left') or (@align = 'right')"> <xsl:text>\begin{flush</xsl:text> <xsl:value-of select="@align"/> <xsl:text>}\itshape </xsl:text> <xsl:apply-templates/> <xsl:text>\end{flush</xsl:text> <xsl:value-of select="@align"/> <xsl:text>}</xsl:text> </xsl:when> <xsl:when test="@align = 'center'"> <xsl:text>\begin{center}\itshape </xsl:text> <xsl:apply-templates/> <xsl:text>\end{center}</xsl:text> </xsl:when> <xsl:otherwise> <xsl:text>\begin{quote}\itshape </xsl:text> <xsl:apply-templates/> <xsl:text>\end{quote}</xsl:text> </xsl:otherwise> </xsl:choose> </latex> <!-- Nominally we should use <BLOCKQUOTE>, but it doesn't have alignment. --> <html> <P> <xsl:if test="@align"> <xsl:attribute name="ALIGN"> <xsl:value-of select="@align"/> </xsl:attribute> </xsl:if> <I><xsl:apply-templates/></I> </P> </html> </template> <!-- Anything inside a <metadata> is ignored completely. (More accurately, we pick bits out of it manually as required; it's only ignored by apply-templates.) If we move to using attributes of "document" for all metadata, this will become redundant. --> <template name="metadata" match="metadata"> <common> <xsl:message><xsl:text>Use of metadata element obsolete!</xsl:text></xsl:message> </common> </template> <!-- Anything inside an <omit> is also ignored completely. --> <template name="omit" match="omit"/> <!-- ...and the legacy id tags inside figures. --> <template match="figure/id"/> <template match="figure/label"/> <!-- Comments are not quite ignored completely, as they're carried through to the output document (kind of: "It is an error if instantiating the content of xsl:comment creates nodes other than text nodes.") --> <template name="comment" match="comment"> <latex> <xsl:text> \begin{comment}</xsl:text> <xsl:apply-templates/> <xsl:text>\end{comment} </xsl:text> </latex> <html> <xsl:comment> <xsl:apply-templates/> </xsl:comment> </html> </template> <!-- Tabular structures (LaTeX {tabular}, HTML <TABLE>). @align: The alignment of the table as a whole. 'left' [default] 'center' 'right' @border: Width of cell border for HTML tables. --> <template name="tabular" match="tabular"> <latex> <!-- Overall table alignment. --> <xsl:if test="@align"> <xsl:text> \begin{</xsl:text> <xsl:choose> <xsl:when test="(@align = 'left') or (@align = 'right')"> <xsl:text>flush</xsl:text><xsl:value-of select="@align"/> </xsl:when> <xsl:when test="@align = 'center'"> <xsl:text>center</xsl:text> </xsl:when> </xsl:choose> <xsl:text>}</xsl:text> </xsl:if> <xsl:text> \begin{tabular}{</xsl:text> <xsl:apply-templates select="tabular-columns"/> <xsl:text>}</xsl:text> <xsl:apply-templates select="tabular-header"/> <xsl:apply-templates select="tabular-body"/> <xsl:apply-templates select="tabular-footer"/> <xsl:text>\end{tabular} </xsl:text> <xsl:if test="@align"> <xsl:text>\end{</xsl:text> <xsl:choose> <xsl:when test="(@align = 'left') or (@align = 'right')"> <xsl:text>flush</xsl:text><xsl:value-of select="@align"/> </xsl:when> <xsl:when test="@align = 'center'"> <xsl:text>center</xsl:text> </xsl:when> </xsl:choose> <xsl:text>} </xsl:text> </xsl:if> </latex> <html> <TABLE> <xsl:attribute name="BORDER"> <xsl:value-of select="@border"/> <xsl:if test="not(@border)">0</xsl:if> </xsl:attribute> <xsl:if test="@align"> <xsl:attribute name="ALIGN"> <xsl:value-of select="@align"/> </xsl:attribute> </xsl:if> <!-- Note different ordering of tabular components: HTML requires THEAD and TFOOT to precede TBODY. --> <xsl:apply-templates select="tabular-header"/> <xsl:apply-templates select="tabular-footer"/> <xsl:apply-templates select="tabular-body"/> </TABLE> </html> </template> <!-- Specify column formatting, mainly for LaTeX, although HTML does get <TD> ALIGN values from here. @align: The alignment of this particular column. 'left' [default] 'center' 'right' @left-border: Set to '\|' to include a column separator to the left of this column. @right-border: Set to '\|' to include a column separator to the right of this column. Careful: including a right-border on a cell and a left-border on the next cell will produce '\|\|', not '\|'. BUT, when doing multi-column or multi-row cells, always include both borders if required, because \multicolumn overrides the default border specification. --> <template name="aligned-tabular-column" match="tabular-columns/column[@align]"> <latex> <xsl:value-of select="@left-border"/> <xsl:value-of select="substring(@align, 1, 1)"/> <xsl:value-of select="@right-border"/> </latex> </template> <template name="unaligned-tabular-column" match="tabular-columns/column[not(@align)]"> <latex> <xsl:value-of select="@left-border"/> <xsl:text>l</xsl:text> <xsl:value-of select="@right-border"/> </latex> </template> <template name="tabular-header" match="tabular-header"> <latex></latex> <html> <THEAD> <xsl:apply-templates/> </THEAD> </html> </template> <template name="tabular-footer" match="tabular-footer"> <latex></latex> <html> <TFOOT> <xsl:apply-templates/> </TFOOT> </html> </template> <template name="tabular-body" match="tabular-body"> <latex><xsl:apply-templates/></latex> <html> <TBODY> <xsl:apply-templates/> </TBODY> </html> </template> <!-- @no-page-break: Inhibit page breaks after this row (LaTeX only). --> <template name="row" match="row"> <latex> <xsl:apply-templates/> <xsl:text> \\</xsl:text> <xsl:if test="@no-page-break = 'yes'"></xsl:if> <xsl:text> </xsl:text> </latex> <html> <TR> <xsl:if test="@valign"> <xsl:attribute name="VALIGN"><xsl:value-of select="@valign"/></xsl:attribute> </xsl:if> <xsl:apply-templates/> </TR> </html> </template> <!-- Horizontal rules (LaTeX only). @columns: The column range to draw the rule across. Specify as you would for a \cline in LaTeX, e.g., '3-5'. If omitted, the rule is drawn across all columns. --> <template name="row-rule-full" match="row-rule[not(@columns)]"> <latex><xsl:text>\hline </xsl:text></latex> </template> <template name="row-rule-partial" match="row-rule[@columns]"> <latex>\cline{<xsl:value-of select="@columns"/>}</latex> </template> <!-- Hmm, the multi-row stuff is somewhat broken in LaTeX, oops. Need to insert missing columns (as was done in the calendar XSL) when a multi-row cell is encountered. Also need to sort out \hlines in the presence of multi-row cells and also what happens to vertical cell borders :( This probably needs reworking. --> <!-- Multi-row cells (LaTeX only, as this is pretty trivial to achieve in HTML). @rows: The number of rows this cell spans. @header: Is this a header cell? [yes, NO] --> <template name="multirow-cell" match="cell" mode="latex-multi-row"> <latex> <xsl:text>\multirow{</xsl:text> <xsl:value-of select="@rows"/> <xsl:text>}{}{</xsl:text> <xsl:if test="@header = 'yes'"><xsl:text>\textbf{</xsl:text></xsl:if> <xsl:apply-templates/> <xsl:if test="@header = 'yes'"><xsl:text>}</xsl:text></xsl:if> <xsl:text>}</xsl:text> </latex> </template> <!-- Multi-column cells (LaTeX only, as this is pretty trivial to achieve in HTML). $num-columns: The number of rows this cell spans. @header: Is this a header cell? [yes, NO] --> <template name="multicolumn-cell" match="cell" mode="latex-multi-column"> <latex> <xsl:param name="num-columns">1</xsl:param> <xsl:text>\multicolumn{</xsl:text> <xsl:value-of select="$num-columns"/> <xsl:text>}{</xsl:text> <xsl:value-of select="@left-border"/> <xsl:choose> <xsl:when test="@align"> <xsl:value-of select="substring(@align, 1, 1)"/> </xsl:when> <xsl:otherwise> <xsl:text>l</xsl:text> </xsl:otherwise> </xsl:choose> <xsl:value-of select="@right-border"/> <xsl:text>}{</xsl:text> <xsl:choose> <xsl:when test="@rows"> <xsl:apply-templates select="." mode="multi-row"/> </xsl:when> <xsl:otherwise> <xsl:if test="@header = 'yes'"><xsl:text>\textbf{</xsl:text></xsl:if> <xsl:apply-templates/> <xsl:if test="@header = 'yes'"><xsl:text>}</xsl:text></xsl:if> </xsl:otherwise> </xsl:choose> <xsl:text>}</xsl:text> </latex> </template> <!-- Top-level template for generating cells. @columns: The number of columns this cell spans. @rows: The number of rows this cell spans. @align: The alignment of this cell. [LEFT, center, right] @header: Is this a header cell? [yes, NO] --> <template match="cell"> <common> <!-- position() doesn't seem to work very well in this context. --> <xsl:variable name="column-no"><xsl:number/></xsl:variable> </common> <!-- Doing this sensibly for LaTeX is actually pretty ugly, because different attribute combinations produce different code :( This is the sort of algorithm that can only really be clearly described by a flow chart :) --> <latex> <xsl:choose> <xsl:when test="@columns"> <xsl:apply-templates select="." mode="latex-multi-column"> <xsl:with-param name="num-columns" select="@columns"/> </xsl:apply-templates> </xsl:when> <xsl:when test="@align"> <xsl:apply-templates select="." mode="latex-multi-column"/> </xsl:when> <xsl:when test="@rows"> <xsl:apply-templates select="." mode="latex-multi-row"/> </xsl:when> <xsl:otherwise> <xsl:if test="@header = 'yes'"><xsl:text>\textbf{</xsl:text></xsl:if> <xsl:apply-templates/> <xsl:if test="@header = 'yes'"><xsl:text>}</xsl:text></xsl:if> </xsl:otherwise> </xsl:choose> <xsl:if test="$column-no != last()"> & </xsl:if> </latex> <!-- It's much easier in HTML, because a <TD> is a <TD> is a <TD>, regardless of the attributes supplied. --> <html> <!-- Hmm, how to generate either a TD or TH as required, including attributes, without repeating code? Aha, the answer is attribute value templates! --> <xsl:variable name="celltype"> <xsl:choose> <xsl:when test="@header = 'yes'">TH</xsl:when> <xsl:otherwise>TD</xsl:otherwise> </xsl:choose> </xsl:variable> <xsl:element name="{$celltype}"> <xsl:attribute name="ALIGN"> <xsl:value-of select="@align"/> <xsl:if test="not(@align)"> <xsl:value-of select="ancestor::tabular/tabular-columns/column[position() = $column-no]/@align"/> <xsl:if test="not(ancestor::tabular/tabular-columns/column[position() = $column-no]/@align)">left</xsl:if> </xsl:if> </xsl:attribute> <xsl:attribute name="VALIGN"> <xsl:value-of select="@valign"/> <xsl:if test="not(@valign)">middle</xsl:if> </xsl:attribute> <xsl:attribute name="COLSPAN"> <xsl:value-of select="@columns"/> <xsl:if test="not(@columns)">1</xsl:if> </xsl:attribute> <xsl:attribute name="ROWSPAN"> <xsl:value-of select="@rows"/> <xsl:if test="not(@rows)">1</xsl:if> </xsl:attribute> <xsl:apply-templates/> </xsl:element> </html> </template> <!-- Hyperlinks. The content of the element is the hyperlink text. @label: A label that the hyperlink links to. The value should be an acceptable label in both LaTeX and HTML. [optional] @url: A URL that the hyperlink links to. If no link text is provided, the URL is used as the link text. [optional] --> <template name="hyperlink-label" match="hyperlink[@label]"> <latex>\hyperref[<xsl:value-of select="@label"/>]{<xsl:apply-templates/>}</latex> <html><A HREF="#{@label}"><xsl:apply-templates/></A></html> </template> <template name="hyperlink-url" match="hyperlink[@url and node()]"> <latex>\href{<xsl:value-of select="@url"/>}{<xsl:apply-templates/>}</latex> <html><A HREF="{@url}"><xsl:apply-templates/></A></html> </template> <!-- Internal parameterised hyperlink template to be called by the likes of the empty Oracle documentation elements. --> <template name="hyperlink-internal" match="hyperlink" mode="hyperlink-internal"> <common> <xsl:param xmlns:xsl-out="http://www.w3.org/1999/XSL/Transform" name="url"/> <xsl:param xmlns:xsl-out="http://www.w3.org/1999/XSL/Transform" name="label"/> </common> <latex>\href{<xsl:value-of select="$url"/>}{<xsl:apply-templates select="exsl:node-set($label)"/>}</latex> <html><A HREF="{$url}"><xsl:apply-templates select="exsl:node-set($label)"/></A></html> </template> <template name="empty-hyperlink-url" match="hyperlink[@url and not(node())]"> <!-- Note: not safe to use the url package here because \url{...} is fragile. --> <latex>\href{<xsl:value-of select="@url"/>}{\texttt{<xsl:value-of select="@url"/>}}</latex> <html><A HREF="{@url}"><CODE><xsl:value-of select="@url"/></CODE></A></html> </template> <!-- A plain URL (i.e., not necessarily a hyperlink). --> <template name="url" match="url\|uri\|email\|e-mail\|email-address\|e-mail-address"> <!-- Hmm, \url{...} appears to turn the URL into a non-functional link in PDF output (probably an interaction with hyperref). Not really what we want (as the link aspect is already dealt with by the <hyperlink> templates), so we'll just use \texttt{...}. --> <latex>\texttt{<xsl:apply-templates/>}</latex> <html><CODE><xsl:apply-templates/></CODE></html> </template> <!-- References. Note the distinction betwen these and hyperlinks: a reference is merely something like "see Section 2.3", and doesn't necessarily imply a hyperlink, or vice versa. @label: The label of the item that we're referencing. It must be a valid label in both LaTeX and HTML. [required] --> <template name="reference" match="reference"> <common> <!-- Find the element whose label is the same as our label. --> <xsl:apply-templates select="//[@label = current()/@label]" mode="reference"/> </common> </template> <!-- Do a separate template for each type of reference; easier. --> <template name="section-reference" match="section" mode="reference"> <!-- It's probably more consistent to just use \ref and insert "Section" ourselves rather than let LaTeX do it. --> <latex>Section~\ref{<xsl:value-of select="@label"/>}</latex> <html> <xsl:text disable-output-escaping="yes">Section&#160;</xsl:text> <xsl:number count="section" level="multiple" format="1.1.1.1.1.1"/> </html> </template> <template name="figure-reference" match="figure" mode="reference"> <latex>Figure~\ref{<xsl:value-of select="@label"/>}</latex> <html> <xsl:text disable-output-escaping="yes">Figure&#160;</xsl:text> <xsl:choose> <xsl:when test="$showanswers='yes'"> <xsl:number count="figure" level="any" format="1"/> </xsl:when> <xsl:otherwise> <xsl:number count="figure[not(ancestor::answer) and not(ancestor::omit) and not(ancestor::comment)]" level="any" format="1"/> </xsl:otherwise> </xsl:choose> </html> </template> <template name="table-reference" match="table" mode="reference"> <latex>Table~\ref{<xsl:value-of select="@label"/>}</latex> <html> <xsl:text disable-output-escaping="yes">Table&#160;</xsl:text> <xsl:choose> <xsl:when test="$showanswers='yes'"> <xsl:number count="table" level="any" format="1"/> </xsl:when> <xsl:otherwise> <xsl:number count="table[not(ancestor::answer) and not(ancestor::omit) and not(ancestor::comment)]" level="any" format="1"/> </xsl:otherwise> </xsl:choose> </html> </template> <!-- Figures & tables (in the LaTeX sense, i.e., "floating" items). --> <template name="figure" match="figure"> <latex> \begin{figure}<xsl:if test="@latex-placement">[<xsl:value-of select="@latex-placement"/>]</xsl:if> \centering <xsl:apply-templates select="[not(self::caption)]"/> <xsl:if test="count(caption) != 0"> \caption{<xsl:apply-templates select="caption"/>} <xsl:if test="@label">\label{<xsl:value-of select="@label"/>}</xsl:if> <xsl:if test="count(id) != 0">\label{<xsl:value-of select="id"/>}</xsl:if> </xsl:if> \end{figure} </latex> <html> <DIV CLASS="figure"> <CENTER> <xsl:if test="@label"><A NAME="{@label}"></A></xsl:if> <xsl:if test="count(id) != 0"><A NAME="{id}"></A></xsl:if> <xsl:apply-templates select="[not(self::caption)]"/> <xsl:if test="count(caption) != 0"> <BR/> <xsl:apply-templates select="caption"/> </xsl:if> </CENTER> </DIV> </html> </template> <template name="table" match="table"> <latex> \begin{table}<xsl:if test="@latex-placement">[<xsl:value-of select="@latex-placement"/>]</xsl:if> \centering <xsl:apply-templates select="[not(self::caption)]"/> <xsl:if test="count(caption) != 0"> \caption{<xsl:apply-templates select="caption"/>} <xsl:if test="@label">\label{<xsl:value-of select="@label"/>}</xsl:if> </xsl:if> \end{table} </latex> <html> <DIV CLASS="table"> <CENTER> <xsl:if test="@label"><A NAME="{@label}"></A></xsl:if> <xsl:apply-templates select="[not(self::caption)]"/> <xsl:if test="count(caption) != 0"> <BR/> <xsl:apply-templates select="caption"/> </xsl:if> </CENTER> </DIV> </html> </template> <template name="figure-caption" match="figure/caption"> <latex><xsl:apply-templates/></latex> <html> <STRONG> <xsl:text>Figure </xsl:text> <xsl:choose> <xsl:when test="$showanswers='yes'"> <xsl:number count="figure" level="any" format="1"/> </xsl:when> <xsl:otherwise> <xsl:number count="figure[not(ancestor::answer) and not(ancestor::omit) and not(ancestor::comment)]" level="any" format="1"/> </xsl:otherwise> </xsl:choose> <xsl:text>. </xsl:text> </STRONG> <xsl:apply-templates/> </html> </template> <template name="table-caption" match="table/caption"> <latex><xsl:apply-templates/></latex> <html> <STRONG> <xsl:text>Table </xsl:text> <xsl:choose> <xsl:when test="$showanswers='yes'"> <xsl:number count="table" level="any" format="1"/> </xsl:when> <xsl:otherwise> <xsl:number count="table[not(ancestor::answer) and not(ancestor::omit) and not(ancestor::comment)]" level="any" format="1"/> </xsl:otherwise> </xsl:choose> <xsl:text>. </xsl:text> </STRONG> <xsl:apply-templates/> </html> </template> <!-- Images. Includes a scaling factor for LaTeX. To do: alternatively, allow defining the scaling factor by specifying what proportion of the page width the image should occupy (a la LaTeX [width] parameter). How about a <latex-attributes> element that can be used to specify \includegraphics arguments? <width keepaspectratio="yes">0.5\columnwidth</width> <height>2cm</height> <scale>0.5</scale> etc. To do: if no description is given, use the basename as the content of the ALT element. Ideally, I think we should be able to define two image formats (PDF, EPS, PNG, ...) when marking up an image: one for LaTeX output, another for HTML. Mind you, if the generation of the various formats from a single master is handled outside of the XSLT processing...? --> <!-- LaTeX images are always handled the same way regardless. --> <template match="image" mode="latex"> <latex> <xsl:text>\includegraphics</xsl:text> <xsl:if test="count(latex-scaling) != 0"> <xsl:text>[scale=</xsl:text> <xsl:value-of select="latex-scaling"/> <xsl:text>]</xsl:text> </xsl:if> <!-- Adding general-purpose latex pass-through arguments for \includegraphics; this should eventually subsume the "scale"-only handler above. --> <!-- If providing multiple arguments, these should be comma-separated in the source XML, but no not need the enclosing square brackets. --> <xsl:if test="@latex-options"> <xsl:text>[</xsl:text> <xsl:value-of select="@latex-options"/> <xsl:text>]</xsl:text> </xsl:if> <!-- Use whatever standard image folder is appropriate for the context. --> <xsl:text>{</xsl:text> <xsl:choose> <!-- Could possibly change this to test="/document/@class = 'tutorial'" or similar? --> <!-- Sounds nicer...I think ideally the XSL processor would automatically figure out the path to the graphics based on the path to the source XML file. Can this be done? --> <xsl:when test="name(/child::node()[1])='tutorial' or /document/@class = 'tutorial'"> <xsl:text>\tutroot/</xsl:text> <!-- Note: support for format-number() is poor/nonexistent in Xalan, unless you build it (and Xerces) with the ICU package. Which you can't do using Cygwin. :^( --> <!-- Xalan also seems to require numbers to be written with a decimal point, otherwise it treats them as text. --> <xsl:value-of select="format-number(/document/@sequence-number, '00')"/><xsl:text>-</xsl:text><xsl:value-of select="/document/@title-code"/> <xsl:text>/Graphics</xsl:text> </xsl:when> <xsl:when test="name(/child::node()[1])='laboratory' or /document/@class = 'laboratory'"> <xsl:text>\labroot/</xsl:text> <xsl:value-of select="format-number(/document/@sequence-number, '00')"/><xsl:text>-</xsl:text><xsl:value-of select="/document/@title-code"/><xsl:text>/Graphics</xsl:text> </xsl:when> <!-- Allow the author to specify a non-standard image location on the fly. --> <xsl:when test="count(location) != 0"> <xsl:value-of select="location"/> </xsl:when> <!-- new style in progress... --> <xsl:otherwise> <xsl:text>images</xsl:text> </xsl:otherwise> </xsl:choose> <xsl:text>/</xsl:text> <!-- need to phase out "basename" as an element and swith to using an attribute --> <xsl:if test="count(basename) != 0"> <xsl:value-of select="basename"/> </xsl:if> <xsl:if test="@basename"> <xsl:value-of select="@basename"/> </xsl:if> <xsl:text>.</xsl:text> <xsl:choose> <xsl:when test="count(format) != 0"> <xsl:value-of select="format"/> </xsl:when> <xsl:otherwise> <xsl:value-of select="$image-format"/> </xsl:otherwise> </xsl:choose> <xsl:text>}</xsl:text> </latex> </template> <template match="image[count(provide-large-version) = 0]"> <latex><xsl:apply-templates select="." mode="latex"/></latex> <html> <IMG BORDER="0"> <xsl:attribute name="SRC"> <xsl:choose> <xsl:when test="(name(/child::node()[1])='tutorial') or (name(/child::node()[1])='laboratory') or /document/@class = 'tutorial' or /document/@class = 'laboratory' "> <xsl:text>Graphics/</xsl:text> <xsl:value-of select="basename\|@basename"/> <xsl:text>-96dpi</xsl:text> </xsl:when> <!-- Allow the author to specify a non-standard image location on the fly. --> <xsl:when test="count(location) != 0"> <xsl:value-of select="location"/> <xsl:text>/</xsl:text> <xsl:value-of select="basename\|@basename"/> </xsl:when> <xsl:otherwise> <xsl:text>images/</xsl:text> <xsl:value-of select="basename\|@basename"/> </xsl:otherwise> </xsl:choose> <xsl:text>.</xsl:text> <xsl:choose> <!-- CME: oops, I'd originally used the "format" tag to identify the format used in the LaTeX version, not the HTML! --> <xsl:when test="count(format) != 0"> <xsl:value-of select="format"/> </xsl:when> <xsl:otherwise> <xsl:text>png</xsl:text> </xsl:otherwise> </xsl:choose> </xsl:attribute> <xsl:attribute name="ALT"><xsl:apply-templates select="description"/></xsl:attribute> </IMG> </html> </template> <template match="image[count(provide-large-version) != 0]"> <latex><xsl:apply-templates select="." mode="latex"/></latex> <html> <A> <xsl:attribute name="HREF"> <!-- This first bit needs to be updated to match the rest, particularly with regards to non-standard image directories. --> <xsl:text>images/</xsl:text> <xsl:value-of select="basename\|@basename"/> <xsl:text>-zoom.</xsl:text> <xsl:choose> <xsl:when test="count(format) != 0"> <xsl:value-of select="format"/> </xsl:when> <xsl:otherwise> <xsl:text>png</xsl:text> </xsl:otherwise> </xsl:choose> </xsl:attribute> <IMG BORDER="0"> <xsl:attribute name="SRC"> <xsl:choose> <xsl:when test="(name(/child::node()[1])='tutorial') or (name(/child::node()[1])='laboratory') or /document/@class = 'tutorial' or /document/@class = 'laboratory' "> <xsl:text>Graphics/</xsl:text> <xsl:value-of select="basename\|@basename"/> <xsl:text>-96dpi</xsl:text> </xsl:when> <!-- Allow the author to specify a non-standard image location on the fly. --> <xsl:when test="count(location) != 0"> <xsl:value-of select="location"/> <xsl:text>/</xsl:text> <xsl:value-of select="basename\|@basename"/> </xsl:when> <xsl:otherwise> <xsl:text>images/</xsl:text> <xsl:value-of select="basename\|@basename"/> </xsl:otherwise> </xsl:choose> <xsl:text>.</xsl:text> <xsl:choose> <!-- CME: oops, I'd originally used the "format" tag to identify the format used in the LaTeX version, not the HTML! --> <xsl:when test="count(format) != 0"> <xsl:value-of select="format"/> </xsl:when> <xsl:otherwise> <xsl:text>png</xsl:text> </xsl:otherwise> </xsl:choose> </xsl:attribute> <xsl:attribute name="ALT"> <xsl:apply-templates select="description"/> </xsl:attribute> </IMG> <BR CLEAR="right"/> <xsl:text>(Larger version)</xsl:text> </A> </html> </template> <!-- Include another XML document into the current one. Including LaTeX should be done using <latex-input>. Nothing for HTML includes at present, although this may not actually be necessary anyway given that HTML doesn't natively support this in the first place. You're probably better off just generating a separate document and linking to it. It's difficult to produce HTML fragments because the XSLT processor seems to always generate a DOCTYPE when producing HTML, whether you want it or not. Maybe you can turn this off? @file: Name of file to include. [required] --> <template name="include-xml" match="include-document"> <common> <xsl:apply-templates select="document(@file)"/> </common> </template> <!-- Environment setup. This enables you to define environment settings (e.g., required LaTeX packages, etc.). We normally explicitly call the sub-elements within this, so this template is empty to prevent unwanted stuff accidentally being included in the output. --> <template name="environment" match="environment"/> <!-- Load a LaTeX package. @options: Any arguments to the package. [optional] --> <template name="latex-package" match="latex-packages/package"> <latex>\usepackage<xsl:if test="@options">[<xsl:value-of select="@options"/>]</xsl:if>{<xsl:value-of select="."/>}</latex> </template> <!-- Execute a preamble LaTeX command. Use to set up things like counters, fonts, hyperref options, etc. --> <template name="latex-command" match="latex-commands/command"> <latex><xsl:value-of select="."/></latex> </template> <!-- Hmm, the following may be more complex than I thought... External environment files sort of stuff it up. Perhaps LaTeX document class stuff should be in attributes of the document element? --> <!-- Specify LaTeX document class and options. The master stylesheet specifies \documentclass[a4paper,12pt]{article}. Anything you specify here will override that completely, so be sure to set a4paper and 12pt if that's what you want. @options: The required document class options. [optional] --> <template name="latex-documentclass" match="latex-documentclass\|documentclass"> <latex>\documentclass{<xsl:value-of select="."/>}</latex> </template> <template name="latex-documentclass-options" match="latex-documentclass[@options]\|documentclass[@options]"> <latex>\documentclass[<xsl:value-of select="@options"/>]{<xsl:value-of select="."/>}</latex> </template> <!-- Specify additional LaTeX document class options (i.e., in addition to the defaults). These should be a comma-separated list of the required options. These will be appended to the standard defaults (a4paper, 12pt). --> <template name="latex-document-options" match="latex-document-options"> <latex><xsl:apply-templates/></latex> </template> <!-- Sometimes we might need to embed raw code to handle something tricky. --> <template name="raw-latex" match="raw-code[@format = 'latex']\|raw-latex"> <latex><xsl:apply-templates/></latex> </template> <template name="raw-html" match="raw-code[@format = 'html']\|raw-html"> <html><xsl:copy-of select=""/></html> </template> <!-- Generate a LaTeX \input{} macro. --> <template name="latex-input" match="latex-input"> <latex>\input{<xsl:value-of select="."/>}</latex> </template> <!-- Conditional processing depending on the format. It may appear redundant to have two templates, but this is the only way to ensure that the LaTeX template is empty in the HTML style sheet, and vice versa. @format: the format under which this XML is to be processed. [required] --> <template name="process-when-latex" match="process-when[@format = 'latex']"> <latex><xsl:apply-templates/></latex> </template> <template name="process-when-html" match="process-when[@format = 'html']"> <html><xsl:apply-templates/></html> </template> <!-- Basic maths stuff. Anything more complicated is... complicated. We should probably be using MathML, but we still have to mangle it into HTML regardless. A <math> inside a <paragraph> is assumed to be inline, while a <math> on its own is assumed to be displayed in its own paragraph. --> <template name="math-inline" match="paragraph//math\|para//math\|p//math\|item//math"> <latex>\(<xsl:apply-templates/>\)</latex> <html><xsl:apply-templates/></html> </template> <template name="math-display" match="math"> <latex>\[<xsl:apply-templates/>\]</latex> <html><P ALIGN="center"><xsl:apply-templates/></P></html> </template> <!-- Equation arrays --> <template name="equation-array" match="equation-array"> <latex> <xsl:text>\begin{eqnarray} </xsl:text> <xsl:apply-templates/> <xsl:text>\end{eqnarray}</xsl:text> </latex> <html> <TABLE CLASS="equation" BORDER="0" ALIGN="CENTER"><xsl:apply-templates/></TABLE> </html> </template> <!-- Hmm, LaTeX uses "&" as separators: how do we know if there's another cell coming? Ah, but the LaTeX eqnarray can have no more than three columns, so there's no need to generalise. --> <template match="equation-array/row"> <latex> <xsl:apply-templates select="left"/><xsl:text disable-output-escaping="yes"> & </xsl:text><xsl:apply-templates select="middle"/><xsl:text disable-output-escaping="yes"> & </xsl:text><xsl:apply-templates select="right"/><xsl:text> \\ \\ </xsl:text> </latex> <html> <TR><TD ALIGN="RIGHT"><xsl:apply-templates select="left"/></TD><TD ALIGN="CENTER"><xsl:apply-templates select="middle"/></TD><TD ALIGN="LEFT"><xsl:apply-templates select="right"/></TD></TR> </html> </template> <!-- Roman (upright) text inside math environments. \mathrm sounds like it's probably more correct, but doesn't retain spaces (which \textup does). --> <template name="math-text" match="text"> <latex>\textup{<xsl:apply-templates/>}</latex> <html><xsl:apply-templates/></html> </template> <!-- Digit grouping separator character for large numbers. SI conventions say this should be a space (but we could make it a comma if desired). --> <template name="digit-group-separator" match="digit-group-separator\|digitsep"> <common> <xsl:call-template name="non-breaking-space"/> </common> </template> <!-- Mathematical super- and subscript. --> <template name="superscript-math" match="math//superscript"> <latex>\ensuremath{^{<xsl:apply-templates/>}}</latex> <html><SUP><xsl:apply-templates/></SUP></html> </template> <template name="subscript-math" match="math//subscript"> <latex>\ensuremath{_{<xsl:apply-templates/>}}</latex> <html><SUB><xsl:apply-templates/></SUB></html> </template> <!-- Basic mathematical operators. We get around the problem of math vs. non-math mode operators in LaTeX by liberally sprinkling \ensuremath around. If we're not in math mode, it enables it, and if we're already in math mode, it ignores it. This means we don't need identical templates for math and non-math modes. Yay! Do we really need <left-parenthesis> and <right-parenthesis>? Maybe we're getting a little carried away with these :) --> <template name="plus-operator" match="plus"> <common>+</common> </template> <template name="minus-operator" match="minus"> <latex>\ensuremath{-}</latex> <html>-</html> </template> <template name="times-operator" match="times"> <latex>\ensuremath{\times}</latex> <html><xsl:text disable-output-escaping="yes"> &#215; </xsl:text></html> </template> <template name="divide-operator" match="divide"> <common>/</common> </template> <template name="equals-operator" match="equals"> <!-- Need spaces for HTML as they seem to get munched otherwise. --> <common> = </common> </template> <template name="greater-than-operator" match="greater-than\|gt"> <!-- Need spaces for HTML as they seem to get munched otherwise. --> <latex> \ensuremath{>} </latex> <html><xsl:text disable-output-escaping="yes">&#62;</xsl:text></html> </template> <template name="greater-equals-operator" match="greater-equals\|ge"> <!-- Need spaces for HTML as they seem to get munched otherwise. --> <latex> \ensuremath{\geq} </latex> <html><xsl:text disable-output-escaping="yes">&#8805;</xsl:text></html> </template> <template name="less-than-operator" match="less-than\|lt"> <!-- Need spaces for HTML as they seem to get munched otherwise. --> <latex> \ensuremath{<} </latex> <html><xsl:text disable-output-escaping="yes">&#60;</xsl:text></html> </template> <template name="less-equals-operator" match="less-equals\|le"> <!-- Need spaces for HTML as they seem to get munched otherwise. --> <latex> \ensuremath{\leq} </latex> <html><xsl:text disable-output-escaping="yes">&#8804;</xsl:text></html> </template> <template name="approximately-equals-operator" match="approximately-equals\|approximately-equal-to\|approx"> <latex>\ensuremath{\approx}</latex> <html><xsl:text disable-output-escaping="yes">&#8776;</xsl:text></html> </template> <template name="right-arrow" match="right-arrow\|rightarrow\|implies\|rarr\|rarrow"> <latex> <xsl:text> \ensuremath{\</xsl:text> <xsl:choose> <xsl:when test="@weight='double'">R</xsl:when> <xsl:otherwise>r</xsl:otherwise> </xsl:choose> <xsl:text>ightarrow} </xsl:text> </latex> <html> <xsl:choose> <xsl:when test="@weight='double'"> <xsl:text disable-output-escaping="yes">&#8658;</xsl:text> </xsl:when> <xsl:otherwise> <xsl:text disable-output-escaping="yes">&#8594;</xsl:text> </xsl:otherwise> </xsl:choose> </html> </template> <template name="left-arrow" match="left-arrow\|leftarrow\|larr\|larrow"> <latex> <xsl:text> \ensuremath{\</xsl:text> <xsl:choose> <xsl:when test="@weight='double'">L</xsl:when> <xsl:otherwise>l</xsl:otherwise> </xsl:choose> <xsl:text>eftarrow} </xsl:text> </latex> <html> <xsl:choose> <xsl:when test="@weight='double'"> <xsl:text disable-output-escaping="yes">&#8656;</xsl:text> </xsl:when> <xsl:otherwise> <xsl:text disable-output-escaping="yes">&#8592;</xsl:text> </xsl:otherwise> </xsl:choose> </html> </template> <!-- The equivalent of LaTeX's "log-like functions". @name: The name of the function. We assume the names used by LaTeX here, as they work out correct anyway. There's actually nothing to stop you using any name you like, except that it'll probably die horribly in LaTeX :) [required] --> <template name="log-like-function" match="function"> <latex>\ensuremath{\<xsl:value-of select="@name"/>}</latex> <html><xsl:value-of select="@name"/></html> </template> <!-- Any mathematical variable names. --> <template name="math-variable" match="variable"> <latex>\ensuremath{<xsl:apply-templates/>}</latex> <html><I><xsl:apply-templates/></I></html> </template> <!-- A displayed fraction. Is there a nicer way of doing this in HTML? --> <template name="math-fraction" match="fraction"> <latex>\ensuremath{\frac{<xsl:apply-templates select="numerator"/>}{<xsl:apply-templates select="denominator"/>}}</latex> <html> <SUP><xsl:apply-templates select="numerator"/></SUP> <xsl:text disable-output-escaping="yes">&#8260;</xsl:text> <SUB><xsl:apply-templates select="denominator"/></SUB> </html> </template> <!-- Format a University paper code. These normally appear in the form "SPOD 123", i.e., a space between the subject code and the paper number. --> <template name="paper" match="paper"> <common> <xsl:apply-templates select="subject-code"/> <xsl:text> </xsl:text> <xsl:apply-templates select="paper-number"/> </common> </template> <template name="subject-code" match="paper/subject-code"> <common><xsl:apply-templates/></common> </template> <template name="paper-number" match="paper/paper-number"> <common><xsl:apply-templates/></common> </template> <!-- Create a layout of multiple columns across the page. By default, columns are of equal width, but may be varied on a column-by-column basis. Each column is totally independent of the others, i.e., you can't have text automatically flowing from one column to the next (yet). @vspace: The amount of vertical space to put around the multi-column elements. [small, medium, big, LaTeX length, NONE] @align: Overall alignment of the columns (only relevant if the total width of the columns is less than the page width). [LEFT, center, right] @width: Total width of the column set, expressed as a fraction of the usable page width between 0 and 1 (this will be multiplied by 100 for HTML). Individual column widths are then expressed as a fraction of this total width. [default is 1] --> <template name="multi-column" match="multi-column"> <latex> <xsl:variable name="total-width"> <xsl:number value="1"/> <xsl:if test="@width"><xsl:value-of select="@width"/></xsl:if> </xsl:variable> <xsl:choose> <xsl:when test="@vspace = 'small'">\smallskip</xsl:when> <xsl:when test="@vspace = 'medium'">\medskip</xsl:when> <xsl:when test="@vspace = 'big'">\bigskip</xsl:when> <xsl:when test="@vspace">\vskip<xsl:value-of select="@vspace"/></xsl:when> </xsl:choose> \noindent <xsl:if test="@align"> <xsl:text>\begin{</xsl:text> <xsl:choose> <xsl:when test="(@align = 'left') or (@align = 'right')"> <xsl:text>flush</xsl:text><xsl:value-of select="@align"/> </xsl:when> <xsl:when test="@align = 'center'"> <xsl:text>center</xsl:text> </xsl:when> </xsl:choose> <xsl:text>}</xsl:text> </xsl:if> <xsl:apply-templates> <xsl:with-param name="default-width"> <xsl:number value="format-number($total-width div count(column),'0.00')"/> </xsl:with-param> </xsl:apply-templates> <xsl:if test="@align"> <xsl:text>\end{</xsl:text> <xsl:choose> <xsl:when test="(@align = 'left') or (@align = 'right')"> <xsl:text>flush</xsl:text><xsl:value-of select="@align"/> </xsl:when> <xsl:when test="@align = 'center'"> <xsl:text>center</xsl:text> </xsl:when> </xsl:choose> <xsl:text>}</xsl:text> </xsl:if> <xsl:choose> <xsl:when test="@vspace = 'small'">\smallskip</xsl:when> <xsl:when test="@vspace = 'medium'">\medskip</xsl:when> <xsl:when test="@vspace = 'big'">\bigskip</xsl:when> <xsl:when test="@vspace">\vskip<xsl:value-of select="@vspace"/></xsl:when> </xsl:choose> </latex> <html> <xsl:variable name="total-width"> <xsl:number value="100"/> <xsl:if test="@width"><xsl:value-of select="@width * 100"/></xsl:if> </xsl:variable> <xsl:if test="@vspace"><BR/></xsl:if> <TABLE BORDER="0" WIDTH="{$total-width}%"> <xsl:if test="@align"> <xsl:attribute name="ALIGN"> <xsl:value-of select="@align"/> </xsl:attribute> </xsl:if> <TR> <xsl:apply-templates> <xsl:with-param name="default-width"> <xsl:number value="round($total-width div count(column))"/> </xsl:with-param> </xsl:apply-templates> </TR> </TABLE> <xsl:if test="@vspace"><BR/></xsl:if> </html> </template> <!-- A column within a multi-column element. $default-width: The default width of the column, expressed as a fraction of the total column set width. This is calculated by the <multi-column> template and should be 1/n of the column set width, where n is the number of columns. @width: The width of this particular column (overrides the default). This should be expressed as a fraction between 0 and 1 (which is then multipled by 100 for HTML). Make sure that all widths add up! @align: How each individual column is to be aligned internally. --> <template name="multi-column-column" match="multi-column/column"> <latex> <xsl:param name="default-width">1</xsl:param> <xsl:text>\begin{minipage}{</xsl:text> <xsl:choose> <xsl:when test="@width"><xsl:value-of select="@width"/></xsl:when> <xsl:otherwise><xsl:value-of select="$default-width"/></xsl:otherwise> </xsl:choose> <xsl:text>\columnwidth}</xsl:text> <xsl:if test="@align"> <xsl:text>\begin{</xsl:text> <xsl:choose> <xsl:when test="(@align = 'left') or (@align = 'right')"> <xsl:text>flush</xsl:text><xsl:value-of select="@align"/> </xsl:when> <xsl:when test="@align = 'center'"> <xsl:text>center</xsl:text> </xsl:when> </xsl:choose> <xsl:text>}</xsl:text> </xsl:if> <xsl:apply-templates/> <xsl:if test="@align"> <xsl:text>\end{</xsl:text> <xsl:choose> <xsl:when test="(@align = 'left') or (@align = 'right')"> <xsl:text>flush</xsl:text><xsl:value-of select="@align"/> </xsl:when> <xsl:when test="@align = 'center'"> <xsl:text>center</xsl:text> </xsl:when> </xsl:choose> <xsl:text>}</xsl:text> </xsl:if> <xsl:text>\end{minipage}</xsl:text> </latex> <html> <xsl:param name="default-width">100</xsl:param> <TD> <xsl:attribute name="WIDTH"> <xsl:choose> <xsl:when test="@width"><xsl:value-of select="@width * 100"/></xsl:when> <xsl:otherwise><xsl:value-of select="$default-width"/></xsl:otherwise> </xsl:choose> <xsl:text>%</xsl:text> </xsl:attribute> <xsl:if test="@align"> <xsl:attribute name="ALIGN"> <xsl:value-of select="@align"/> </xsl:attribute> </xsl:if> <xsl:apply-templates/> </TD> </html> </template> <!-- Center stuff on the page. --> <template name="center" match="center\|centering"> <latex> \begin{center} <xsl:apply-templates/> \end{center} </latex> <html> <CENTER> <xsl:apply-templates/> </CENTER> </html> </template> </stylesheet>

Ignore Space Show notes View

format-master.xml

<?xml version="1.0"?>

<stylesheet
	xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
>

<template name="OracleServer" match="OracleServer">
		<latex>Oracle9\textit{i}</latex>
		<html>Oracle9<I>i</I></html>
	</template>

<template name="Blackboard" match="Blackboard">
		<common>
			<xsl:call-template name="hyperlink-internal">
				<xsl:with-param name="url">http://blackboard.otago.ac.nz/</xsl:with-param>
				<xsl:with-param name="label">Blackboard</xsl:with-param>
			</xsl:call-template>
		</common>
	</template>

<template name="paragraph" match="paragraph|para|p|P">
		<latex>
			<xsl:text>

</xsl:text>
			<xsl:choose>
				<xsl:when test="(@align = 'left') or (@align = 'right')">
					<xsl:text>\begin{flush</xsl:text>
					<xsl:value-of select="@align"/>
					<xsl:text>}</xsl:text>
					<xsl:apply-templates/>
					<xsl:text>\end{flush</xsl:text>
					<xsl:value-of select="@align"/>
					<xsl:text>}</xsl:text>
				</xsl:when>
				<xsl:when test="@align = 'center'">
					<xsl:text>\begin{center}</xsl:text>
					<xsl:apply-templates/>
					<xsl:text>\end{center}</xsl:text>
				</xsl:when>
				<xsl:otherwise>
					<xsl:if test="@indent = 'no'">\noindent </xsl:if>
					<xsl:apply-templates/>
				</xsl:otherwise>
			</xsl:choose>
			<xsl:text>
	
		
			</xsl:text>
		</latex>
		
		<html>
			<P>
				<xsl:if test="@align">
					<xsl:attribute name="ALIGN">
						<xsl:value-of select="@align"/>
					</xsl:attribute>
				</xsl:if>
				<xsl:apply-templates/>
			</P>
		</html>
	</template>
	
	
	
	<template name="newline" match="newline|line-break|br">
		<latex><xsl:text> \\
</xsl:text></latex>
		<html><BR/></html>
	</template>

<template name="newline-internal" match="newline-internal">
		<latex><xsl:text>
</xsl:text></latex>
		<html><xsl:text>
</xsl:text></html>
	</template>
	
	<template name="page-break" match="page-break|new-page|newpage|pagebreak">
		<latex>\newpage</latex>
	</template>
	
	<template name="non-breaking-space" match="non-breaking-space|nbsp">
		<latex>~</latex>
		<html><xsl:text disable-output-escaping="yes">&amp;nbsp;</xsl:text></html>
	</template>

<template name="ellipsis-sign" match="ellipsis-sign|etc|ellipsis|dots">
		<latex>{\ldots}</latex>
		<html><xsl:text disable-output-escaping="yes">&amp;#8230;</xsl:text></html>
	</template>

<template name="endash" match="endash|en-dash">	
		<latex>--</latex>
		<html><xsl:text disable-output-escaping="yes">&amp;#8211;</xsl:text></html>
	</template>

<template name="trademark-sign" match="trademark-sign|trademark|TM">
		<latex>{\texttrademark}</latex>
		<html><xsl:text disable-output-escaping="yes">&amp;#8482;</xsl:text></html>
	</template>

<template name="copyright-sign" match="copyright-sign">
		<latex>{\copyright}</latex>
		<html><xsl:text disable-output-escaping="yes">&amp;#169;</xsl:text></html>
	</template>

<template name="degree-sign" match="degree-sign|degrees">
		<latex>\ensuremath{^{\circ}}</latex>
		<html><xsl:text disable-output-escaping="yes">&amp;#176;</xsl:text></html>
	</template>

<template name="pi" match="pi">
		<latex>\ensuremath{\pi}</latex>
		<html><xsl:text disable-output-escaping="yes">&amp;#960;</xsl:text></html>
	</template>

<template name="LaTeX" match="LaTeX|latex">
		<latex>{\LaTeX}</latex>
		<html>L<SUP>A</SUP>T<SUB>E</SUB>X</html>
	</template>

<template name="menu-separator" match="menu-separator|menusep|menu/separator">
		<latex> \ensuremath{\triangleright} </latex>
		<html><xsl:text disable-output-escaping="yes"> &amp;#8594; </xsl:text></html>
	</template>

<template name="menu-item" match="menu/item">
		<latex>\textbf{<xsl:apply-templates/>}</latex>
		<html><B><xsl:apply-templates/></B></html>
	</template>
	
	
	<template name="emph" match="emph">
		<latex>\emph{<xsl:apply-templates/>}</latex>
		<html><EM><xsl:apply-templates/></EM></html>
	</template>
	<template name="italic" match="italic">
		<latex>\textit{<xsl:apply-templates/>}</latex>
		<html><I><xsl:apply-templates/></I></html>
	</template>
	<template name="strong" match="strong">
		<latex>\textbf{<xsl:apply-templates/>}</latex>
		<html><STRONG><xsl:apply-templates/></STRONG></html>
	</template>
	<template name="bold" match="bold">
		<latex>\textbf{<xsl:apply-templates/>}</latex>
		<html><B><xsl:apply-templates/></B></html>
	</template>
	<template name="term" match="term">
		<latex>\term{<xsl:apply-templates/>}</latex>
		<html><I CLASS="term"><xsl:apply-templates/></I></html>
	</template>
	<template name="foreign" match="foreign">
		<latex>\foreign{<xsl:apply-templates/>}</latex>
		<html><I CLASS="foreign"><xsl:apply-templates/></I></html>
	</template>
	<template name="code" match="code">
		
		
		
		<latex>\verb+<xsl:apply-templates/>+</latex>
		<html><CODE><xsl:apply-templates/></CODE></html>
	</template>

<template name="typewriter" match="typewriter|monospace|tt">
		<latex>\texttt{<xsl:apply-templates/>}</latex>
		<html><CODE><xsl:apply-templates/></CODE></html>
	</template>
	
	<template name="sans-serif" match="sans-serif|sans|ss|sf">
		<latex>\textsf{<xsl:apply-templates/>}</latex>
		<html><FONT FACE="sans-serif"><xsl:apply-templates/></FONT></html>
	</template>
	
	
	<template name="superscript" match="superscript">
		<latex>\ensuremath{^{\mathrm{<xsl:apply-templates/>}}}</latex>
		<html><SUP><xsl:apply-templates/></SUP></html>
	</template>
	
	<template name="subscript" match="subscript">
		<latex>\ensuremath{_{\mathrm{<xsl:apply-templates/>}}}</latex>
		<html><SUB><xsl:apply-templates/></SUB></html>
	</template>
	
	
	<template name="no-break" match="no-break|mbox">
		<latex>\mbox{<xsl:apply-templates/>}</latex>
		<html><xsl:apply-templates/></html>
	</template>
	
	
	
	<template name="vertical-skip" match="vertical-skip|vskip">
		<latex>
			<xsl:choose>
				<xsl:when test="not(@size)">
					\vskip\baselineskip
				</xsl:when>
				<xsl:when test="@size='small'">
					\smallskip
				</xsl:when>
				<xsl:when test="@size='medium'">
					\medskip
				</xsl:when>
				<xsl:when test="@size='large'">
					\bigskip
				</xsl:when>
				<xsl:when test="@size='fill'">
					\vfill
				</xsl:when>
				<xsl:otherwise>
					\vskip<xsl:value-of select="@size"/>
				</xsl:otherwise>
			</xsl:choose>
		</latex>
		
		<html><BR/></html>
	</template>

<template name="code-block" match="code-block">
		<latex>
			<xsl:call-template name="newline-internal"/>
			
			<xsl:if test="@allow-breaks = 'no'">
				<xsl:text>\vskip\baselineskip</xsl:text>
				<xsl:call-template name="newline-internal"/>
				<xsl:text>\begin{minipage}{\textwidth}</xsl:text>
				<xsl:call-template name="newline-internal"/>
			</xsl:if>
			<xsl:text>\begin{verbatim}</xsl:text>
			<xsl:apply-templates/>
			<xsl:text>\end{verbatim}</xsl:text>
			<xsl:call-template name="newline-internal"/>
			<xsl:if test="@allow-breaks = 'no'">
				<xsl:text>\end{minipage}</xsl:text>
				<xsl:call-template name="newline-internal"/>
				<xsl:text>\vskip\baselineskip</xsl:text>
				<xsl:call-template name="newline-internal"/>
			</xsl:if>
		</latex>
		<html>
			<PRE CLASS="code"><xsl:apply-templates/></PRE>
		</html>
	</template>

<template name="verbatim" match="verbatim">
		<latex>
			<xsl:call-template name="newline-internal"/>
			<xsl:text>\begin{verbatim}</xsl:text>
			<xsl:apply-templates/>
			<xsl:text>\end{verbatim}</xsl:text>
			<xsl:call-template name="newline-internal"/>
		</latex>
		<html>
			<PRE><xsl:apply-templates/></PRE>
		</html>
	</template>

<template name="single-quote" match="quote[@single='yes']|q[@single='yes']">
		<latex>`<xsl:apply-templates/>'</latex>
		<html>
			<xsl:text disable-output-escaping="yes">&amp;#8216;</xsl:text>
			<xsl:apply-templates/>
			<xsl:text disable-output-escaping="yes">&amp;#8217;</xsl:text>
		</html>
	</template>
	<template name="double-quote" match="quote|qq">
		<latex>``<xsl:apply-templates/>''</latex>
		<html>
			<xsl:text disable-output-escaping="yes">&amp;#8220;</xsl:text>
			<xsl:apply-templates/>
			<xsl:text disable-output-escaping="yes">&amp;#8221;</xsl:text>
		</html>
	</template>
	
	<template name="nested-double-quote" match="quote//quote">
		<common>
			<xsl:choose>
				<xsl:when test="(count(ancestor::quote) mod 2) = 0">
					<xsl:call-template name="double-quote"/>
				</xsl:when>
				<xsl:otherwise>
					<xsl:call-template name="single-quote"/>
				</xsl:otherwise>
			</xsl:choose>
		</common>
	</template>
	<template name="nested-single-quote" match="quote[@single='yes']//quote" priority="2">
		<common>
			<xsl:choose>
				<xsl:when test="(count(ancestor::quote) mod 2) = 0">
					<xsl:call-template name="single-quote"/>
				</xsl:when>
				<xsl:otherwise>
					<xsl:call-template name="double-quote"/>
				</xsl:otherwise>
			</xsl:choose>
		</common>
	</template>

<template name="itemised-list" match="itemised-list|itemize|unordered-list|bulleted-list|bullet-list|bullet-points|UL|ul">
		<latex>
			\begin{itemize}
				<xsl:apply-templates/>
			\end{itemize}
			
		</latex>
		<html>
			<UL>
				<xsl:apply-templates/>
			</UL>
		</html>
	</template>

<template name="enumerated-list" match="enumerated-list|enumerate|ordered-list|numbered-list|question-list|OL|ol">
		<latex>
			\begin{enumerate}
				<xsl:apply-templates/>
			\end{enumerate}
			
		</latex>
		<html>
			<OL>
				<xsl:apply-templates/>
			</OL>
		</html>
	</template>
	
	
	
	<template name="definition-list" match="definition-list|description-list|DL|dl">
		<latex>
			\begin{description}
				<xsl:apply-templates mode="definition-list"/>
			\end{description}
			
		</latex>
		<html>
			
			<DL>
				<xsl:apply-templates mode="definition-list"/>
			</DL>



		</html>
	</template>

<template name="list-item" match="item">
		<latex><xsl:text>\item </xsl:text><xsl:apply-templates/></latex>
		<html>
			<xsl:choose>
				
				<xsl:when test="count(paragraph|para|p|question|answer) != 0">
					<LI><xsl:apply-templates/></LI>
				</xsl:when>
				
				<xsl:otherwise>
					<LI><P><xsl:apply-templates/></P></LI>
				</xsl:otherwise>
			</xsl:choose>
		</html>
	</template>

<template name="definition-item" match="item" mode="definition-list">
		<latex>
			<xsl:text>\item[</xsl:text>
			<xsl:apply-templates select="keyword|topic|DT|dt"/>
			<xsl:text>] </xsl:text>
			<xsl:apply-templates select="definition|description|discourse|DD|dd"/>
		</latex>
		<html>
			<DT><P><xsl:apply-templates select="keyword|topic|DT|dt"/></P></DT>
			<DD><xsl:apply-templates select="definition|description|discourse|DD|dd"/></DD>




		</html>
	</template>
	
	<template name="keyword" match="keyword|topic|DT|dt">
		<latex><xsl:apply-templates/></latex>
		<html><STRONG><xsl:apply-templates/></STRONG></html>
	</template>
	
	
	
	<template name="definition" match="item/definition|item/description|item/discourse|item/DD|item/dd">
		<latex><xsl:apply-templates/></latex>
		<html>
			<xsl:choose>
				<xsl:when test="count(paragraph|para|p) != 0">
					<xsl:apply-templates/>
				</xsl:when>
				<xsl:otherwise>
					<P><xsl:apply-templates/></P>
				</xsl:otherwise>
			</xsl:choose>
		</html>
	</template>

<template name="question" match="question">
		<latex><xsl:apply-templates/></latex>
		<html>
			<xsl:choose>
				
				<xsl:when test="count(paragraph|para|p|question|answer) != 0">
					<xsl:apply-templates/>
				</xsl:when>
				
				<xsl:otherwise>
					<P><xsl:apply-templates/></P>
				</xsl:otherwise>
			</xsl:choose>
		</html>
	</template>

<template name="answer" match="answer">
		<latex>
			
			<xsl:if test="$showanswers='yes'">
			\begin{answer}
				<xsl:apply-templates/>
			\end{answer}

</xsl:if>
		</latex>
		<html>
			<xsl:if test="$showanswers='yes'">
				<DIV CLASS="answer">
					<xsl:apply-templates/>
				</DIV>
			</xsl:if>
		</html>
	</template>

<template name="section" match="section">
		<latex>
			<xsl:apply-templates>
				<xsl:with-param name="label">
					<xsl:value-of select="@label"/>
					<xsl:if test="not(@label)">THERE_IS_NO_LABEL</xsl:if>
				</xsl:with-param>
			</xsl:apply-templates>
		</latex>
		<html>
			<xsl:if test="@label"><A NAME="{@label}"></A></xsl:if>
			<xsl:apply-templates/>
		</html>
	</template>
	
	
	
	<template name="footnote" match="footnote">
		<latex>\footnote{<xsl:apply-templates/>}</latex>
		<html>
			<A>
				<xsl:attribute name="NAME">
					<xsl:text>footnote-</xsl:text>
					<xsl:number level="any" count="footnote"/>
					<xsl:text>-source</xsl:text>
				</xsl:attribute>
				<xsl:attribute name="HREF">
					<xsl:text>#footnote-</xsl:text>
					<xsl:number level="any" count="footnote"/>
					<xsl:text>-target</xsl:text>
				</xsl:attribute>
				<xsl:text>[</xsl:text>
				<xsl:number level="any" count="footnote"/>
				<xsl:text>]</xsl:text>
			</A>
		</html>
	</template>

<template name="footnote-list" match="footnote" mode="list">
		<html>
			<P>
				<A>
					<xsl:attribute name="NAME">
						<xsl:text>footnote-</xsl:text>
						<xsl:number level="any" count="footnote"/>
						<xsl:text>-target</xsl:text>
					</xsl:attribute>
					<xsl:text>[</xsl:text>
					<xsl:number level="any" count="footnote"/>
					<xsl:text>]</xsl:text>
				</A>
				<xsl:text> </xsl:text>
				<xsl:apply-templates/>
				<xsl:text> </xsl:text>
				
				<A>
					<xsl:attribute name="HREF">
						<xsl:text>#footnote-</xsl:text>
						<xsl:number level="any" count="footnote"/>
						<xsl:text>-source</xsl:text>
					</xsl:attribute>
					<xsl:text>[Back]</xsl:text>
				</A>
			</P>
		</html>
	</template>

<template name="preamble-title" match="document/title" mode="preamble">
		<latex>\title{<xsl:apply-templates/>}</latex>
		<html>
			<xsl:apply-templates/>
		</html>
	</template>

<template name="preamble-author" match="document/author" mode="preamble">
		<latex>\author{<xsl:apply-templates/>}</latex>
	</template>

<template name="document-title" match="document/title">
		
		<latex>
			
			
			<xsl:if test="/document/@standalone = 'yes'"><xsl:apply-templates/></xsl:if>
		</latex>
		<html>
			<xsl:choose>
				<xsl:when test="/document/@class = 'tutorial'">
					<H1><xsl:call-template name="PaperCode"/> Tutorial <xsl:value-of select="/document/@sequence-number"/><xsl:if test="$showanswers='yes'"> Sample Answers</xsl:if>: <BR/><xsl:apply-templates/></H1>
				</xsl:when>
				<xsl:when test="/document/@class = 'laboratory'">
					<H1><xsl:call-template name="PaperCode"/> Lab <xsl:value-of select="/document/@sequence-number"/><xsl:if test="$showanswers='yes'"> Sample Answers</xsl:if>: <BR/><xsl:apply-templates/></H1>
				</xsl:when>
				<xsl:otherwise>
					<H1><xsl:apply-templates/></H1>
				</xsl:otherwise>
			</xsl:choose>
		</html>
	</template>

<template name="chapter-title" match="document/title" mode="chapter">
		<latex>
			<xsl:apply-templates/>
		</latex>
		<html>
			<xsl:choose>
				<xsl:when test="/document/@class = 'tutorial'">
					<H1><xsl:call-template name="PaperCode"/> Tutorial <xsl:value-of select="/document/@sequence-number"/><xsl:if test="$showanswers='yes'"> Sample Answers</xsl:if>: <BR/><xsl:apply-templates/></H1>
				</xsl:when>
				<xsl:when test="/document/@class = 'laboratory'">
					<H1><xsl:call-template name="PaperCode"/> Lab <xsl:value-of select="/document/@sequence-number"/><xsl:if test="$showanswers='yes'"> Sample Answers</xsl:if>: <BR/><xsl:apply-templates/></H1>
				</xsl:when>
				<xsl:otherwise>
					<H1><xsl:apply-templates/></H1>
				</xsl:otherwise>
			</xsl:choose>
		</html>
	</template>
	
	<template name="document-author" match="document/author"/>
	<template name="document-date" match="document/date"/>

<template name="generate-subs">
		<latex>
			<xsl:param name="depth">1</xsl:param>
			<xsl:if test="$depth &gt; 1">
				<xsl:text>sub</xsl:text>
				<xsl:call-template name="generate-subs">
					<xsl:with-param name="depth"><xsl:value-of select="$depth - 1"/></xsl:with-param>
				</xsl:call-template>
			</xsl:if>
		</latex>
	</template>
	
	
	<template name="section-title" match="section/title">
		<latex>
			<xsl:param name="label"/>
			<xsl:text>\</xsl:text>
			
			<xsl:call-template name="generate-subs">
				<xsl:with-param name="depth">
					<xsl:number value="count(ancestor::section)"/>
					<xsl:if test="count(ancestor::section) &gt; 3">3</xsl:if>
				</xsl:with-param>
			</xsl:call-template>
			<xsl:text>section{</xsl:text>
			<xsl:apply-templates/><xsl:text>}</xsl:text>
			<xsl:if test="$label != 'THERE_IS_NO_LABEL'">
				\label{<xsl:value-of select="$label"/>}
			</xsl:if>
		</latex>
		<html>
			
			<xsl:variable name="depth">
				<xsl:number value="1 + count(ancestor::section)"/>
				<xsl:if test="1 + count(ancestor::section) &gt; 6">6</xsl:if>
			</xsl:variable>
			<xsl:text disable-output-escaping="yes">&lt;H</xsl:text><xsl:number value="$depth"/><xsl:text disable-output-escaping="yes">&gt;</xsl:text>
			<xsl:number count="section" level="multiple" format="1.1.1.1.1.1"/>
			<xsl:text> </xsl:text>
			<xsl:apply-templates/>
			<xsl:text disable-output-escaping="yes">&lt;/H</xsl:text><xsl:number value="$depth"/><xsl:text disable-output-escaping="yes">&gt;</xsl:text>
		</html>
	</template>

<template name="quotation" match="quotation">
		<latex>
			<xsl:choose>
				<xsl:when test="(@align = 'left') or (@align = 'right')">
					<xsl:text>\begin{flush</xsl:text>
					<xsl:value-of select="@align"/>
					<xsl:text>}\itshape </xsl:text>
					<xsl:apply-templates/>
					<xsl:text>\end{flush</xsl:text>
					<xsl:value-of select="@align"/>
					<xsl:text>}</xsl:text>
				</xsl:when>
				<xsl:when test="@align = 'center'">
					<xsl:text>\begin{center}\itshape </xsl:text>
					<xsl:apply-templates/>
					<xsl:text>\end{center}</xsl:text>
				</xsl:when>
				<xsl:otherwise>
					<xsl:text>\begin{quote}\itshape </xsl:text>
					<xsl:apply-templates/>
					<xsl:text>\end{quote}</xsl:text>
				</xsl:otherwise>
			</xsl:choose>
		</latex>
		
		<html>
			<P>
				<xsl:if test="@align">
					<xsl:attribute name="ALIGN">
						<xsl:value-of select="@align"/>
					</xsl:attribute>
				</xsl:if>
				<I><xsl:apply-templates/></I>
			</P>
		</html>
	</template>
	
	
	<!--
		Anything inside a <metadata> is ignored completely. (More
		accurately, we pick bits out of it manually as required; it's
		only ignored by apply-templates.)

If we move to using attributes of "document" for all metadata, this will become redundant.
	-->
	<template name="metadata" match="metadata">
		<common>
			<xsl:message><xsl:text>Use of metadata element obsolete!</xsl:text></xsl:message>
		</common>
	</template>
	
	
	
	<template name="omit" match="omit"/>

<template match="figure/id"/>
	<template match="figure/label"/>

<template name="comment" match="comment">
		<latex>
			<xsl:text>
\begin{comment}</xsl:text>
				<xsl:apply-templates/>
				<xsl:text>\end{comment}
</xsl:text>
		</latex>
		<html>
			<xsl:comment>
				<xsl:apply-templates/>
			</xsl:comment>
		</html>
	</template>
	
	
	
	<template name="tabular" match="tabular">
		<latex>
			
			<xsl:if test="@align">
				<xsl:text>
				
				\begin{</xsl:text>
				<xsl:choose>
					<xsl:when test="(@align = 'left') or (@align = 'right')">
						<xsl:text>flush</xsl:text><xsl:value-of select="@align"/>
					</xsl:when>
					<xsl:when test="@align = 'center'">
						<xsl:text>center</xsl:text>
					</xsl:when>
				</xsl:choose>
				<xsl:text>}</xsl:text>
			</xsl:if>
			<xsl:text>
			
			\begin{tabular}{</xsl:text>
			<xsl:apply-templates select="tabular-columns"/>
			<xsl:text>}</xsl:text>
				<xsl:apply-templates select="tabular-header"/>
				<xsl:apply-templates select="tabular-body"/>
				<xsl:apply-templates select="tabular-footer"/>
			<xsl:text>\end{tabular}
			
			</xsl:text>
			<xsl:if test="@align">
				<xsl:text>\end{</xsl:text>
				<xsl:choose>
					<xsl:when test="(@align = 'left') or (@align = 'right')">
						<xsl:text>flush</xsl:text><xsl:value-of select="@align"/>
					</xsl:when>
					<xsl:when test="@align = 'center'">
						<xsl:text>center</xsl:text>
					</xsl:when>
				</xsl:choose>
				<xsl:text>}
				
				</xsl:text>
			</xsl:if>
		</latex>
		<html>
			<TABLE>
				<xsl:attribute name="BORDER">
					<xsl:value-of select="@border"/>
					<xsl:if test="not(@border)">0</xsl:if>
				</xsl:attribute>
				<xsl:if test="@align">
					<xsl:attribute name="ALIGN">
						<xsl:value-of select="@align"/>
					</xsl:attribute>
				</xsl:if>
				
				<xsl:apply-templates select="tabular-header"/>
				<xsl:apply-templates select="tabular-footer"/>
				<xsl:apply-templates select="tabular-body"/>
			</TABLE>
		</html>
	</template>
	
	<!--
		Specify column formatting, mainly for LaTeX, although
		HTML does get <TD> ALIGN values from here.
		
		@align: The alignment of this particular column.
			'left' [default]
			'center'
			'right'
		
		@left-border: Set to '|' to include a column separator to the
		left of this column.

@right-border: Set to '|' to include a column separator to the
		right of this column.
		
		Careful: including a right-border on a cell and a left-border on
		the next cell will produce '||', not '|'. BUT, when doing
		multi-column or multi-row cells, always include both borders if
		required, because \multicolumn overrides the default border
		specification.
	-->
	<template name="aligned-tabular-column" match="tabular-columns/column[@align]">
		<latex>
			<xsl:value-of select="@left-border"/>
			<xsl:value-of select="substring(@align, 1, 1)"/>
			<xsl:value-of select="@right-border"/>
		</latex>
	</template>

<template name="row" match="row">
		<latex>
			<xsl:apply-templates/>
			<xsl:text> \\</xsl:text>
			<xsl:if test="@no-page-break = 'yes'">*</xsl:if>
			<xsl:text> </xsl:text>
		</latex>
		<html>
			<TR>
				<xsl:if test="@valign">
					<xsl:attribute name="VALIGN"><xsl:value-of select="@valign"/></xsl:attribute>
				</xsl:if>
				<xsl:apply-templates/>
			</TR>
		</html>
	</template>

<template name="row-rule-full" match="row-rule[not(@columns)]">
		<latex><xsl:text>\hline </xsl:text></latex>
	</template>

<template name="row-rule-partial" match="row-rule[@columns]">
		<latex>\cline{<xsl:value-of select="@columns"/>}</latex>
	</template>
	
	
	
	
	<template name="multirow-cell" match="cell" mode="latex-multi-row">
		<latex>
			<xsl:text>\multirow{</xsl:text>
			<xsl:value-of select="@rows"/>
			<xsl:text>}{*}{</xsl:text>
			<xsl:if test="@header = 'yes'"><xsl:text>\textbf{</xsl:text></xsl:if>
			<xsl:apply-templates/>
			<xsl:if test="@header = 'yes'"><xsl:text>}</xsl:text></xsl:if>
			<xsl:text>}</xsl:text>
		</latex>
	</template>
	
	
	<template name="multicolumn-cell" match="cell" mode="latex-multi-column">
		<latex>
			<xsl:param name="num-columns">1</xsl:param>
			<xsl:text>\multicolumn{</xsl:text>
			<xsl:value-of select="$num-columns"/>
			<xsl:text>}{</xsl:text>
			<xsl:value-of select="@left-border"/>
			<xsl:choose>
				<xsl:when test="@align">
					<xsl:value-of select="substring(@align, 1, 1)"/>
				</xsl:when>
				<xsl:otherwise>
					<xsl:text>l</xsl:text>
				</xsl:otherwise>
			</xsl:choose>
			<xsl:value-of select="@right-border"/>
			<xsl:text>}{</xsl:text>
			<xsl:choose>
				<xsl:when test="@rows">
					<xsl:apply-templates select="." mode="multi-row"/>
				</xsl:when>
				<xsl:otherwise>
					<xsl:if test="@header = 'yes'"><xsl:text>\textbf{</xsl:text></xsl:if>
					<xsl:apply-templates/>
					<xsl:if test="@header = 'yes'"><xsl:text>}</xsl:text></xsl:if>
				</xsl:otherwise>
			</xsl:choose>
			<xsl:text>}</xsl:text>
		</latex>
	</template>
	
	
	<template match="cell">
		<common>
			
			<xsl:variable name="column-no"><xsl:number/></xsl:variable>
		</common>
		
		<latex>
			<xsl:choose>
				<xsl:when test="@columns">
					<xsl:apply-templates select="." mode="latex-multi-column">
						<xsl:with-param name="num-columns" select="@columns"/>
					</xsl:apply-templates>
				</xsl:when>
				<xsl:when test="@align">
					<xsl:apply-templates select="." mode="latex-multi-column"/>
				</xsl:when>
				<xsl:when test="@rows">
					<xsl:apply-templates select="." mode="latex-multi-row"/>
				</xsl:when>
				<xsl:otherwise>
					<xsl:if test="@header = 'yes'"><xsl:text>\textbf{</xsl:text></xsl:if>
					<xsl:apply-templates/>
					<xsl:if test="@header = 'yes'"><xsl:text>}</xsl:text></xsl:if>
				</xsl:otherwise>
			</xsl:choose>
			<xsl:if test="$column-no != last()"> &amp; </xsl:if>
		</latex>
		
		<html>
			
			<xsl:variable name="celltype">
				<xsl:choose>
					<xsl:when test="@header = 'yes'">TH</xsl:when>
					<xsl:otherwise>TD</xsl:otherwise>
				</xsl:choose>
			</xsl:variable>
			<xsl:element name="{$celltype}">
				<xsl:attribute name="ALIGN">
					<xsl:value-of select="@align"/>
					<xsl:if test="not(@align)">
						<xsl:value-of select="ancestor::tabular/tabular-columns/column[position() = $column-no]/@align"/>
						<xsl:if test="not(ancestor::tabular/tabular-columns/column[position() = $column-no]/@align)">left</xsl:if>
					</xsl:if>
				</xsl:attribute>
				<xsl:attribute name="VALIGN">
					<xsl:value-of select="@valign"/>
					<xsl:if test="not(@valign)">middle</xsl:if>
				</xsl:attribute>
				<xsl:attribute name="COLSPAN">
					<xsl:value-of select="@columns"/>
					<xsl:if test="not(@columns)">1</xsl:if>
				</xsl:attribute>
				<xsl:attribute name="ROWSPAN">
					<xsl:value-of select="@rows"/>
					<xsl:if test="not(@rows)">1</xsl:if>
				</xsl:attribute>
				<xsl:apply-templates/>
			</xsl:element>
		</html>
	</template>
	
	
	
	<template name="hyperlink-label" match="hyperlink[@label]">
		<latex>\hyperref[<xsl:value-of select="@label"/>]{<xsl:apply-templates/>}</latex>
		<html><A HREF="#{@label}"><xsl:apply-templates/></A></html>
	</template>

<template name="hyperlink-internal" match="hyperlink" mode="hyperlink-internal">
		<common>
			<xsl:param xmlns:xsl-out="http://www.w3.org/1999/XSL/Transform" name="url"/>
			<xsl:param xmlns:xsl-out="http://www.w3.org/1999/XSL/Transform" name="label"/>
		</common>
		<latex>\href{<xsl:value-of select="$url"/>}{<xsl:apply-templates select="exsl:node-set($label)"/>}</latex>
		<html><A HREF="{$url}"><xsl:apply-templates select="exsl:node-set($label)"/></A></html>
	</template>

<template name="empty-hyperlink-url" match="hyperlink[@url and not(node())]">
		
		<latex>\href{<xsl:value-of select="@url"/>}{\texttt{<xsl:value-of select="@url"/>}}</latex>
		<html><A HREF="{@url}"><CODE><xsl:value-of select="@url"/></CODE></A></html>
	</template>
	
	
	<template name="url" match="url|uri|email|e-mail|email-address|e-mail-address">
		
		<latex>\texttt{<xsl:apply-templates/>}</latex>
		<html><CODE><xsl:apply-templates/></CODE></html>
	</template>

<template name="reference" match="reference">
		<common>
			
			<xsl:apply-templates select="//*[@label = current()/@label]" mode="reference"/>
		</common>
	</template>
	
	
	<template name="section-reference" match="section" mode="reference">
		
		<latex>Section~\ref*{<xsl:value-of select="@label"/>}</latex>
		<html>
			<xsl:text disable-output-escaping="yes">Section&amp;#160;</xsl:text>
			<xsl:number count="section" level="multiple" format="1.1.1.1.1.1"/>
		</html>
	</template>
	
	<template name="figure-reference" match="figure" mode="reference">
		<latex>Figure~\ref*{<xsl:value-of select="@label"/>}</latex>
		<html>
			<xsl:text disable-output-escaping="yes">Figure&amp;#160;</xsl:text>
			<xsl:choose>
				<xsl:when test="$showanswers='yes'">
					<xsl:number count="figure" level="any" format="1"/>
				</xsl:when>
				<xsl:otherwise>
					<xsl:number count="figure[not(ancestor::answer) and not(ancestor::omit) and not(ancestor::comment)]" level="any" format="1"/>
				</xsl:otherwise>
			</xsl:choose>
		</html>
	</template>
	
	<template name="table-reference" match="table" mode="reference">
		<latex>Table~\ref*{<xsl:value-of select="@label"/>}</latex>
		<html>
			<xsl:text disable-output-escaping="yes">Table&amp;#160;</xsl:text>
			<xsl:choose>
				<xsl:when test="$showanswers='yes'">
					<xsl:number count="table" level="any" format="1"/>
				</xsl:when>
				<xsl:otherwise>
					<xsl:number count="table[not(ancestor::answer) and not(ancestor::omit) and not(ancestor::comment)]" level="any" format="1"/>
				</xsl:otherwise>
			</xsl:choose>
		</html>
	</template>
	
	
	
	<template name="figure" match="figure">
		<latex>
			\begin{figure}<xsl:if test="@latex-placement">[<xsl:value-of select="@latex-placement"/>]</xsl:if>
				\centering
				<xsl:apply-templates select="*[not(self::caption)]"/>
				<xsl:if test="count(caption) != 0">
					\caption{<xsl:apply-templates select="caption"/>}
					<xsl:if test="@label">\label{<xsl:value-of select="@label"/>}</xsl:if>
					<xsl:if test="count(id) != 0">\label{<xsl:value-of select="id"/>}</xsl:if>
				</xsl:if>
			\end{figure}
		</latex>
		<html>
			<DIV CLASS="figure">
				<CENTER>
					<xsl:if test="@label"><A NAME="{@label}"></A></xsl:if>
					<xsl:if test="count(id) != 0"><A NAME="{id}"></A></xsl:if>
					<xsl:apply-templates select="*[not(self::caption)]"/>
					<xsl:if test="count(caption) != 0">
						<BR/>
						<xsl:apply-templates select="caption"/>
					</xsl:if>
				</CENTER>
			</DIV>
		</html>
	</template>
	
	<template name="table" match="table">
		<latex>
			\begin{table}<xsl:if test="@latex-placement">[<xsl:value-of select="@latex-placement"/>]</xsl:if>
				\centering
				<xsl:apply-templates select="*[not(self::caption)]"/>
				<xsl:if test="count(caption) != 0">
					\caption{<xsl:apply-templates select="caption"/>}
					<xsl:if test="@label">\label{<xsl:value-of select="@label"/>}</xsl:if>
				</xsl:if>
			\end{table}
		</latex>
		<html>
			<DIV CLASS="table">
				<CENTER>
					<xsl:if test="@label"><A NAME="{@label}"></A></xsl:if>
					<xsl:apply-templates select="*[not(self::caption)]"/>
					<xsl:if test="count(caption) != 0">
						<BR/>
						<xsl:apply-templates select="caption"/>
					</xsl:if>
				</CENTER>
			</DIV>
		</html>
	</template>
	
	<template name="figure-caption" match="figure/caption">
		<latex><xsl:apply-templates/></latex>
		<html>
			<STRONG>
				<xsl:text>Figure </xsl:text>
				<xsl:choose>
					<xsl:when test="$showanswers='yes'">
						<xsl:number count="figure" level="any" format="1"/>
					</xsl:when>
					<xsl:otherwise>
						<xsl:number count="figure[not(ancestor::answer) and not(ancestor::omit) and not(ancestor::comment)]" level="any" format="1"/>
					</xsl:otherwise>
				</xsl:choose>
				<xsl:text>. </xsl:text>
			</STRONG>
			<xsl:apply-templates/>
		</html>
	</template>
	
	<template name="table-caption" match="table/caption">
		<latex><xsl:apply-templates/></latex>
		<html>
			<STRONG>
				<xsl:text>Table </xsl:text>
				<xsl:choose>
					<xsl:when test="$showanswers='yes'">
						<xsl:number count="table" level="any" format="1"/>
					</xsl:when>
					<xsl:otherwise>
						<xsl:number count="table[not(ancestor::answer) and not(ancestor::omit) and not(ancestor::comment)]" level="any" format="1"/>
					</xsl:otherwise>
				</xsl:choose>
				<xsl:text>. </xsl:text>
			</STRONG>
			<xsl:apply-templates/>
		</html>
	</template>
	
	
	
	
	
	<template match="image" mode="latex">
		<latex>
			<xsl:text>\includegraphics</xsl:text>
			<xsl:if test="count(latex-scaling) != 0">
				<xsl:text>[scale=</xsl:text>
				<xsl:value-of select="latex-scaling"/>
				<xsl:text>]</xsl:text>
			</xsl:if>
			
			
			<xsl:if test="@latex-options">
				<xsl:text>[</xsl:text>
				<xsl:value-of select="@latex-options"/>
				<xsl:text>]</xsl:text>
			</xsl:if>
			
			<xsl:text>{</xsl:text>
			<xsl:choose>
				
				
				<xsl:when test="name(/child::node()[1])='tutorial' or /document/@class = 'tutorial'">
					<xsl:text>\tutroot/</xsl:text>
					
					
					<xsl:value-of select="format-number(/document/@sequence-number, '00')"/><xsl:text>-</xsl:text><xsl:value-of select="/document/@title-code"/>
					<xsl:text>/Graphics</xsl:text>			
				</xsl:when>
				<xsl:when test="name(/child::node()[1])='laboratory' or /document/@class = 'laboratory'">
					<xsl:text>\labroot/</xsl:text>
					<xsl:value-of select="format-number(/document/@sequence-number, '00')"/><xsl:text>-</xsl:text><xsl:value-of select="/document/@title-code"/><xsl:text>/Graphics</xsl:text>
				</xsl:when>
				
				<xsl:when test="count(location) != 0">
					<xsl:value-of select="location"/>
				</xsl:when>
				
				<xsl:otherwise>
					<xsl:text>images</xsl:text>
				</xsl:otherwise>
			</xsl:choose>
			<xsl:text>/</xsl:text>
			
			<xsl:if test="count(basename) != 0">
				<xsl:value-of select="basename"/>
			</xsl:if>
			<xsl:if test="@basename">
				<xsl:value-of select="@basename"/>
			</xsl:if>
			<xsl:text>.</xsl:text>
			<xsl:choose>
				<xsl:when test="count(format) != 0">
					<xsl:value-of select="format"/>
				</xsl:when>
				<xsl:otherwise>
					<xsl:value-of select="$image-format"/>
				</xsl:otherwise>
			</xsl:choose>
			<xsl:text>}</xsl:text>
		</latex>
	</template>
	
	<template match="image[count(provide-large-version) = 0]">
		<latex><xsl:apply-templates select="." mode="latex"/></latex>
		<html>
			<IMG BORDER="0">
				<xsl:attribute name="SRC">
					<xsl:choose>
						<xsl:when test="(name(/child::node()[1])='tutorial') or (name(/child::node()[1])='laboratory') or /document/@class = 'tutorial' or /document/@class = 'laboratory' ">
							<xsl:text>Graphics/</xsl:text>
							<xsl:value-of select="basename|@basename"/>
							<xsl:text>-96dpi</xsl:text>
						</xsl:when>
						
						<xsl:when test="count(location) != 0">
							<xsl:value-of select="location"/>
							<xsl:text>/</xsl:text>
							<xsl:value-of select="basename|@basename"/>
						</xsl:when>
						<xsl:otherwise>
							<xsl:text>images/</xsl:text>
							<xsl:value-of select="basename|@basename"/>
						</xsl:otherwise>
					</xsl:choose>
					<xsl:text>.</xsl:text>
					<xsl:choose>
						
						<xsl:when test="count(format) != 0">
							<xsl:value-of select="format"/>
						</xsl:when>
						<xsl:otherwise>
							<xsl:text>png</xsl:text>
						</xsl:otherwise>
					</xsl:choose>
				</xsl:attribute>
				<xsl:attribute name="ALT"><xsl:apply-templates select="description"/></xsl:attribute>
			</IMG>
		</html>
	</template>

<template match="image[count(provide-large-version) != 0]">
		<latex><xsl:apply-templates select="." mode="latex"/></latex>
		<html>
			<A>
				<xsl:attribute name="HREF">
					
					<xsl:text>images/</xsl:text>
					<xsl:value-of select="basename|@basename"/>
					<xsl:text>-zoom.</xsl:text>
					<xsl:choose>
						<xsl:when test="count(format) != 0">
							<xsl:value-of select="format"/>
						</xsl:when>
						<xsl:otherwise>
							<xsl:text>png</xsl:text>
						</xsl:otherwise>
					</xsl:choose>
				</xsl:attribute>
				<IMG BORDER="0">
					<xsl:attribute name="SRC">
						<xsl:choose>
							<xsl:when test="(name(/child::node()[1])='tutorial') or (name(/child::node()[1])='laboratory') or /document/@class = 'tutorial' or /document/@class = 'laboratory' ">
								<xsl:text>Graphics/</xsl:text>
								<xsl:value-of select="basename|@basename"/>
								<xsl:text>-96dpi</xsl:text>
							</xsl:when>
							
							<xsl:when test="count(location) != 0">
								<xsl:value-of select="location"/>
								<xsl:text>/</xsl:text>
								<xsl:value-of select="basename|@basename"/>
							</xsl:when>
							<xsl:otherwise>
								<xsl:text>images/</xsl:text>
								<xsl:value-of select="basename|@basename"/>
							</xsl:otherwise>
						</xsl:choose>
						<xsl:text>.</xsl:text>
						<xsl:choose>
							
							<xsl:when test="count(format) != 0">
								<xsl:value-of select="format"/>
							</xsl:when>
							<xsl:otherwise>
								<xsl:text>png</xsl:text>
							</xsl:otherwise>
						</xsl:choose>
					</xsl:attribute>
					<xsl:attribute name="ALT">
						<xsl:apply-templates select="description"/>
					</xsl:attribute>
				</IMG>
				<BR CLEAR="right"/>
				<xsl:text>(Larger version)</xsl:text>
			</A>
		</html>
	</template>
	
	
	
	<template name="include-xml" match="include-document">
		<common>
			<xsl:apply-templates select="document(@file)"/>
		</common>
	</template>
	
	
	
	<template name="environment" match="environment"/>

<template name="latex-package" match="latex-packages/package">
		<latex>\usepackage<xsl:if test="@options">[<xsl:value-of select="@options"/>]</xsl:if>{<xsl:value-of select="."/>}</latex>
	</template>
		
	
	<template name="latex-command" match="latex-commands/command">
		<latex><xsl:value-of select="."/></latex>
	</template>

<template name="latex-documentclass" match="latex-documentclass|documentclass">
		<latex>\documentclass{<xsl:value-of select="."/>}</latex>
	</template>
	<template name="latex-documentclass-options" match="latex-documentclass[@options]|documentclass[@options]">
		<latex>\documentclass[<xsl:value-of select="@options"/>]{<xsl:value-of select="."/>}</latex>
	</template>
	
	
	<template name="latex-document-options" match="latex-document-options">
		<latex><xsl:apply-templates/></latex>
	</template>
	
	
	
	<template name="raw-latex" match="raw-code[@format = 'latex']|raw-latex">
		<latex><xsl:apply-templates/></latex>
	</template>
		
	<template name="raw-html" match="raw-code[@format = 'html']|raw-html">
		<html><xsl:copy-of select="*"/></html>
	</template>
		
	
	<template name="latex-input" match="latex-input">
		<latex>\input{<xsl:value-of select="."/>}</latex>
	</template>

<template name="process-when-latex" match="process-when[@format = 'latex']">
		<latex><xsl:apply-templates/></latex>
	</template>
	
	<template name="process-when-html" match="process-when[@format = 'html']">
		<html><xsl:apply-templates/></html>
	</template>
	
	
	
	<template name="math-inline" match="paragraph//math|para//math|p//math|item//math">
		<latex>$<xsl:apply-templates/>$</latex>
		<html><xsl:apply-templates/></html>
	</template>
	
	<template name="math-display" match="math">
		<latex>\[<xsl:apply-templates/>\]</latex>
		<html><P ALIGN="center"><xsl:apply-templates/></P></html>
	</template>

<template name="equation-array" match="equation-array">
		<latex>
			<xsl:text>\begin{eqnarray*}
</xsl:text>
			<xsl:apply-templates/>
			<xsl:text>\end{eqnarray*}</xsl:text>
		</latex>
		<html>
			<TABLE CLASS="equation" BORDER="0" ALIGN="CENTER"><xsl:apply-templates/></TABLE>
		</html>
	</template>

<template match="equation-array/row">
		<latex>
			<xsl:apply-templates select="left"/><xsl:text disable-output-escaping="yes">	&amp;	</xsl:text><xsl:apply-templates select="middle"/><xsl:text disable-output-escaping="yes">	&amp;	</xsl:text><xsl:apply-templates select="right"/><xsl:text>	\\
\\
</xsl:text>
		</latex>
		<html>
			<TR><TD ALIGN="RIGHT"><xsl:apply-templates select="left"/></TD><TD ALIGN="CENTER"><xsl:apply-templates select="middle"/></TD><TD ALIGN="LEFT"><xsl:apply-templates select="right"/></TD></TR>
		</html>
	</template>

<template name="math-text" match="text">
		<latex>\textup{<xsl:apply-templates/>}</latex>
		<html><xsl:apply-templates/></html>
	</template>
	
	
	<template name="digit-group-separator" match="digit-group-separator|digitsep">
		<common>
			<xsl:call-template name="non-breaking-space"/>
		</common>
	</template>

<template name="superscript-math" match="math//superscript">
		<latex>\ensuremath{^{<xsl:apply-templates/>}}</latex>
		<html><SUP><xsl:apply-templates/></SUP></html>
	</template>
	
	<template name="subscript-math" match="math//subscript">
		<latex>\ensuremath{_{<xsl:apply-templates/>}}</latex>
		<html><SUB><xsl:apply-templates/></SUB></html>
	</template>
	
	<!--
		Basic mathematical operators.
		
		We get around the problem of math vs. non-math mode
		operators in LaTeX by liberally sprinkling \ensuremath
		around. If we're not in math mode, it enables it, and if
		we're already in math mode, it ignores it. This means we
		don't need identical templates for math and non-math modes. Yay!

Do we really need <left-parenthesis> and <right-parenthesis>?
		Maybe we're getting a little carried away with these :)
	-->
	<template name="plus-operator" match="plus">
		<common>+</common>
	</template>
	
	<template name="minus-operator" match="minus">
		<latex>\ensuremath{-}</latex>
		<html>-</html>
	</template>
	
	<template name="times-operator" match="times">
		<latex>\ensuremath{\times}</latex>
		<html><xsl:text disable-output-escaping="yes"> &amp;#215; </xsl:text></html>
	</template>
	
	<template name="divide-operator" match="divide">
		<common>/</common>
	</template>
	
	<template name="equals-operator" match="equals">
		
		<common> = </common>
	</template>

<template name="greater-than-operator" match="greater-than|gt">
		
		<latex> \ensuremath{&gt;} </latex>
		<html><xsl:text disable-output-escaping="yes">&amp;#62;</xsl:text></html>
	</template>

<template name="greater-equals-operator" match="greater-equals|ge">
		
		<latex> \ensuremath{\geq} </latex>
		<html><xsl:text disable-output-escaping="yes">&amp;#8805;</xsl:text></html>
	</template>

<template name="less-than-operator" match="less-than|lt">
		
		<latex> \ensuremath{&lt;} </latex>
		<html><xsl:text disable-output-escaping="yes">&amp;#60;</xsl:text></html>
	</template>

<template name="less-equals-operator" match="less-equals|le">
		
		<latex> \ensuremath{\leq} </latex>
		<html><xsl:text disable-output-escaping="yes">&amp;#8804;</xsl:text></html>
	</template>

<template name="approximately-equals-operator" match="approximately-equals|approximately-equal-to|approx">
		<latex>\ensuremath{\approx}</latex>
		<html><xsl:text disable-output-escaping="yes">&amp;#8776;</xsl:text></html>
	</template>
	
	<template name="right-arrow" match="right-arrow|rightarrow|implies|rarr|rarrow">
		<latex>
			<xsl:text> \ensuremath{\</xsl:text>
			<xsl:choose>
				<xsl:when test="@weight='double'">R</xsl:when>
				<xsl:otherwise>r</xsl:otherwise>
			</xsl:choose>
			<xsl:text>ightarrow} </xsl:text>
		</latex>
		<html>
			<xsl:choose>
				<xsl:when test="@weight='double'">
					<xsl:text disable-output-escaping="yes">&amp;#8658;</xsl:text>
				</xsl:when>
				<xsl:otherwise>
					<xsl:text disable-output-escaping="yes">&amp;#8594;</xsl:text>
				</xsl:otherwise>
			</xsl:choose>
		</html>
	</template>
	
	<template name="left-arrow" match="left-arrow|leftarrow|larr|larrow">
		<latex>
			<xsl:text> \ensuremath{\</xsl:text>
			<xsl:choose>
				<xsl:when test="@weight='double'">L</xsl:when>
				<xsl:otherwise>l</xsl:otherwise>
			</xsl:choose>
			<xsl:text>eftarrow} </xsl:text>
		</latex>
		<html>
			<xsl:choose>
				<xsl:when test="@weight='double'">
					<xsl:text disable-output-escaping="yes">&amp;#8656;</xsl:text>
				</xsl:when>
				<xsl:otherwise>
					<xsl:text disable-output-escaping="yes">&amp;#8592;</xsl:text>
				</xsl:otherwise>
			</xsl:choose>
		</html>
	</template>
	
	
	<template name="log-like-function" match="function">
		<latex>\ensuremath{\<xsl:value-of select="@name"/>}</latex>
		<html><xsl:value-of select="@name"/></html>
	</template>
	
	
	<template name="math-variable" match="variable">
		<latex>\ensuremath{<xsl:apply-templates/>}</latex>
		<html><I><xsl:apply-templates/></I></html>
	</template>
	
	
	<template name="math-fraction" match="fraction">
		<latex>\ensuremath{\frac{<xsl:apply-templates select="numerator"/>}{<xsl:apply-templates select="denominator"/>}}</latex>
		<html>
			<SUP><xsl:apply-templates select="numerator"/></SUP>
			<xsl:text disable-output-escaping="yes">&amp;#8260;</xsl:text>
			<SUB><xsl:apply-templates select="denominator"/></SUB>
		</html>
	</template>
	
	
	
	<template name="paper" match="paper">
		<common>
			<xsl:apply-templates select="subject-code"/>
			<xsl:text> </xsl:text>
			<xsl:apply-templates select="paper-number"/>
		</common>
	</template>
	
	<template name="subject-code" match="paper/subject-code">
		<common><xsl:apply-templates/></common>
	</template>
		
	<template name="paper-number" match="paper/paper-number">
		<common><xsl:apply-templates/></common>
	</template>
	
	
	
	<template name="multi-column" match="multi-column">
		<latex>
			<xsl:variable name="total-width">
				<xsl:number value="1"/>
				<xsl:if test="@width"><xsl:value-of select="@width"/></xsl:if>
			</xsl:variable>
			<xsl:choose>
				<xsl:when test="@vspace = 'small'">\smallskip</xsl:when>
				<xsl:when test="@vspace = 'medium'">\medskip</xsl:when>
				<xsl:when test="@vspace = 'big'">\bigskip</xsl:when>
				<xsl:when test="@vspace">\vskip<xsl:value-of select="@vspace"/></xsl:when>
			</xsl:choose>
			\noindent
			<xsl:if test="@align">
				<xsl:text>\begin{</xsl:text>
				<xsl:choose>
					<xsl:when test="(@align = 'left') or (@align = 'right')">
						<xsl:text>flush</xsl:text><xsl:value-of select="@align"/>
					</xsl:when>
					<xsl:when test="@align = 'center'">
						<xsl:text>center</xsl:text>
					</xsl:when>
				</xsl:choose>
				<xsl:text>}</xsl:text>
			</xsl:if>
			<xsl:apply-templates>
				<xsl:with-param name="default-width">
					<xsl:number value="format-number($total-width div count(column),'0.00')"/>
				</xsl:with-param>
			</xsl:apply-templates>
			<xsl:if test="@align">
				<xsl:text>\end{</xsl:text>
				<xsl:choose>
					<xsl:when test="(@align = 'left') or (@align = 'right')">
						<xsl:text>flush</xsl:text><xsl:value-of select="@align"/>
					</xsl:when>
					<xsl:when test="@align = 'center'">
						<xsl:text>center</xsl:text>
					</xsl:when>
				</xsl:choose>
				<xsl:text>}</xsl:text>
			</xsl:if>
			<xsl:choose>
				<xsl:when test="@vspace = 'small'">\smallskip</xsl:when>
				<xsl:when test="@vspace = 'medium'">\medskip</xsl:when>
				<xsl:when test="@vspace = 'big'">\bigskip</xsl:when>
				<xsl:when test="@vspace">\vskip<xsl:value-of select="@vspace"/></xsl:when>
			</xsl:choose>
		</latex>
		<html>
			<xsl:variable name="total-width">
				<xsl:number value="100"/>
				<xsl:if test="@width"><xsl:value-of select="@width * 100"/></xsl:if>
			</xsl:variable>
			<xsl:if test="@vspace"><BR/></xsl:if>
			<TABLE BORDER="0" WIDTH="{$total-width}%">
				<xsl:if test="@align">
					<xsl:attribute name="ALIGN">
						<xsl:value-of select="@align"/>
					</xsl:attribute>
				</xsl:if>
				<TR>
					<xsl:apply-templates>
						<xsl:with-param name="default-width">
							<xsl:number value="round($total-width div count(column))"/>
						</xsl:with-param>
					</xsl:apply-templates>
				</TR>
			</TABLE>
			<xsl:if test="@vspace"><BR/></xsl:if>
		</html>
	</template>
	
	
	<template name="multi-column-column" match="multi-column/column">
		<latex>
			<xsl:param name="default-width">1</xsl:param>
			<xsl:text>\begin{minipage}{</xsl:text>
			<xsl:choose>
				<xsl:when test="@width"><xsl:value-of select="@width"/></xsl:when>
				<xsl:otherwise><xsl:value-of select="$default-width"/></xsl:otherwise>
			</xsl:choose>
			<xsl:text>\columnwidth}</xsl:text>
			<xsl:if test="@align">
				<xsl:text>\begin{</xsl:text>
				<xsl:choose>
					<xsl:when test="(@align = 'left') or (@align = 'right')">
						<xsl:text>flush</xsl:text><xsl:value-of select="@align"/>
					</xsl:when>
					<xsl:when test="@align = 'center'">
						<xsl:text>center</xsl:text>
					</xsl:when>
				</xsl:choose>
				<xsl:text>}</xsl:text>
			</xsl:if>
			<xsl:apply-templates/>
			<xsl:if test="@align">
				<xsl:text>\end{</xsl:text>
				<xsl:choose>
					<xsl:when test="(@align = 'left') or (@align = 'right')">
						<xsl:text>flush</xsl:text><xsl:value-of select="@align"/>
					</xsl:when>
					<xsl:when test="@align = 'center'">
						<xsl:text>center</xsl:text>
					</xsl:when>
				</xsl:choose>
				<xsl:text>}</xsl:text>
			</xsl:if>
			<xsl:text>\end{minipage}</xsl:text>
		</latex>
		<html>
			<xsl:param name="default-width">100</xsl:param>
			<TD>
				<xsl:attribute name="WIDTH">
					<xsl:choose>
						<xsl:when test="@width"><xsl:value-of select="@width * 100"/></xsl:when>
						<xsl:otherwise><xsl:value-of select="$default-width"/></xsl:otherwise>
					</xsl:choose>
					<xsl:text>%</xsl:text>
				</xsl:attribute>
				<xsl:if test="@align">
					<xsl:attribute name="ALIGN">
						<xsl:value-of select="@align"/>
					</xsl:attribute>
				</xsl:if>
				<xsl:apply-templates/>
			</TD>
		</html>
	</template>
	
	
	
	<template name="center" match="center|centering">
		<latex>
			\begin{center}
				<xsl:apply-templates/>
			\end{center}
		</latex>
		<html>
			<CENTER>
				<xsl:apply-templates/>
			</CENTER>
		</html>
	</template>

</stylesheet>

<template name="OracleServer" match="OracleServer">
		<latex>Oracle9\textit{i}</latex>
		<html>Oracle9<I>i</I></html>
	</template>

<template name="endash" match="endash|en-dash">	
		<latex>--</latex>
		<html><xsl:text disable-output-escaping="yes">&amp;#8211;</xsl:text></html>
	</template>

<template name="trademark-sign" match="trademark-sign|trademark|TM">
		<latex>{\texttrademark}</latex>
		<html><xsl:text disable-output-escaping="yes">&amp;#8482;</xsl:text></html>
	</template>

<template name="copyright-sign" match="copyright-sign">
		<latex>{\copyright}</latex>
		<html><xsl:text disable-output-escaping="yes">&amp;#169;</xsl:text></html>
	</template>

<template name="degree-sign" match="degree-sign|degrees">
		<latex>\ensuremath{^{\circ}}</latex>
		<html><xsl:text disable-output-escaping="yes">&amp;#176;</xsl:text></html>
	</template>

<template name="LaTeX" match="LaTeX|latex">
		<latex>{\LaTeX}</latex>
		<html>L<SUP>A</SUP>T<SUB>E</SUB>X</html>
	</template>

<template name="list-item" match="item">
		<latex><xsl:text>\item </xsl:text><xsl:apply-templates/></latex>
		<html>
			<xsl:choose>
				<xsl:when test="count(paragraph|para|p) != 0">
					<LI><xsl:apply-templates/></LI>
				</xsl:when>
				<xsl:otherwise>
					<LI><P><xsl:apply-templates/></P></LI>
				</xsl:otherwise>
			</xsl:choose>
		</html>
	</template>

<template name="answer" match="answer">
		<latex>
			
			<xsl:if test="$showanswers='yes'">
			\begin{answer}
				<xsl:apply-templates/>
			\end{answer}

</xsl:if>
		</latex>
		<html>
			<xsl:if test="$showanswers='yes'">
				<DIV CLASS="answer">
					<xsl:apply-templates/>
				</DIV>
			</xsl:if>
		</html>
	</template>

<template name="preamble-author" match="document/author" mode="preamble">
		<latex>\author{<xsl:apply-templates/>}</latex>
	</template>

<template match="figure/id"/>
	<template match="figure/label"/>

</stylesheet>

Show line notes below